Name: Forged Dynalite Pro Series Front Brake Kit
Brand: Wilwood
Availability: InStock

Front Brake Kit – Part No: 140-12535-R

Call (805) 388-1188

Forged Dynalite Pro Series Front Brake Kit

Prod #: 140-12535-R

Price: $1,236.74

Available Brake Kit #140-12535 Configurations

140-12535
Black Calipers
10.75-inch Rotors
Undrilled Rotors

140-12535-D
Black Calipers
10.75-inch Rotors
Drilled & Slotted Rotors

140-12535-DR
Red Calipers
10.75-inch Rotors
Drilled & Slotted Rotors

140-12535-R
Red Calipers
10.75-inch Rotors
Undrilled Rotors

*Line Kit Needed

220-12168
$96.18

Available Brake Kit #140-12535 Configurations

140-12535
Black Calipers
10.75-inch Rotors
Undrilled Rotors

140-12535-D
Black Calipers
10.75-inch Rotors
Drilled & Slotted Rotors

140-12535-DR
Red Calipers
10.75-inch Rotors
Drilled & Slotted Rotors

140-12535-R
Red Calipers
10.75-inch Rotors
Undrilled Rotors

*Line Kit Needed

220-12168
$96.18

Front Brake Kit — 140-12535-R

Kit Contents
Wilwood Forged Dynalite Pro Series Front Brake Kit Parts Laid Out - Red Powder Coat Caliper - Plain Face Rotor Click Image to Close
View Custom Caliper Colors

Kit Summary
OE Hub Offset:	+0.92
(Increase / Decrease Track Width)
Spindle Type:	Factory Drum Spindle
Mount Type:	Lug
Caliper Type:	4 - Red Powder Coat
Rotor Diameter:	10.75
Min Wheel Diameter Req'd*:	14
*This Brake Kit may fit 14-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram

UPC Number
UPC	889545016741

	WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
	Applicable to Brake Pads Only

Forged Dynalite Pro Series Front Brake Kit

FDL Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditional drum spindle applications on American muscle cars, vintage rods, and heavy weight drag cars. This kit designed for 63-66 Mustang & Falcon 6 cylinder spindles. Using the venerable forged billet Dynalite 4 piston caliper, 10.75" diameter rotor and forged aluminum hub assembly that will overall increase the offset the wheel by +0.92 with the included wheel spacer over the original drum brake. Removal of the spacer will lessen the offset to +0.72", but may cause interference between wheel and caliper. Please consult the wheel clearance diagram and instruction sheet before purchasing and installing. This kit does not require spindle modifications for installation, and can provide plenty of clearance inside many popular 14” or 15” wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders.

Watch more videos!

65 Mustang Wilwood Brake Install

Fitment & Installation Details

Forged Dynalite Pro Series Front Brake Kit Assembly Schematic

Forged Dynalite Pro Series Front Brake Kit Assembly Schematic Zoom Image

Compatible Vehicles for this Brake Kit

BRAKE KIT: Forged Dynalite Pro Series Front Brake Kit

SPINDLE TYPE:

Factory Drum Spindle ;

This Brake Kit is Compatible with the Following Vehicle Makes: Ford Mercury

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

View All Vehicles

Caution
	THIS BRAKE KIT HAS A HUB OFFSET OF: +0.92 This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

Wheel Clearance	Assembly Instructions
Wheel Clearance Diagram Click Image to Close	Assembly Instructions

Notes

Kit Components & Specifications

Calipers
Left Hand - Part No:	120-13844-RD
Right Hand - Part No:	120-13844-RD
Type:	Forged Dynalite Internal
Finish Color:	Red Powder Coat
Piston Count:	4
Piston 1 Bore (in):	1.75
Piston 2 Bore (in):	1.75
Piston Area (In²):	4.80
Piston Type:	Stainless
Mount Type:	Lug
Brake Pad Plate:	7112
Brake Pad Area (In²):	6.36
Brake Pad Volume (In³):	2.1
Pad Compound:	BP-10
Forged Dynalite Internal Caliper - Red Powder Coat Click Image to Close

Rotors
Left Hand - Part No:	160-5839
Right Hand - Part No:	160-5839
Type:	Ultralite HP 30
Style:	Plain Face
Surface Finish:	Plain
Material:	Iron
Outside Diameter (in):	10.75
Width (in):	0.81
Vane Count:	30 V
Design Type:	ULHP
Bedded:	No
Dynamically Balanced:	No
Ultralite HP 30 - Iron - Plain Click Image to Close

Rotor Hats
Hat - Part No:
Type:
Material:
Finish Color:
Hat Offset Dimension (in):
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Hubs
Hub - Part No:	270-12537
Type:	Hub - Vented Rotor Offset
Material:	Aluminum
Finish Color:	Bare
Mount Style:	Adapter
Bolt Circle 1:	4 x 4.50
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:	1/2-20
Stud Diameter - BC 2:
Stud Diameter - BC 3:
Hub - Vented Rotor Offset - Aluminum - Bare Click Image to Close

Parts & Accessories

Caliper Parts
O-ring Kit:	130-2655
Replacement Dustboot:	N-A
Replacement Piston 1:	200-7528
Replacement Piston 2:	200-7528
Replacement Piston 3:	N-A
Replacement Piston 4:	N-A
CrossOver O-Ring Kit:	130-10540
Crossover Tube:	N-A
Self-Bleeder Tube:	N-A
Bridge Bolt Kit:	N-A
Wear Plate - Left Hand:	300-5875
Wear Plate - Right Hand:	300-5875
Pad Retainer:	180-0055
Bleed Screw Kit:	220-0627

*Brake Lines Needed
Front Line Kit:	220-12168

Hat
Bolt Kit:

Hub
Bolt Kit:

You May Also Be Interested In: