Rear Brake Kit – Part No: 140-5369
Call (805) 388-1188
Forged Dynalite Dual Dynamic Rear Drag Brake Kit
Prod #: 140-5369
Price: $1,108.78

Rear Brake Kit - Rear Kit


Kit Contents
Wilwood Forged Dynalite Dual Dynamic Rear Drag Brake Kit Parts Laid Out - Type III Anodize Caliper - Plain Face Rotor Wilwood Forged Dynalite Dual Dynamic Rear Drag Brake Kit Parts Laid Out - Type III Anodize Caliper - Plain Face Rotor Zoom Image


View Custom Caliper Colors

Kit Summary
Rear End Axle: Symmetrical End
Axle Offset: 2.81
Mount Type: Lug
Caliper Type: 8 - Type III Anodize
Rotor Diameter: 11.44
Min Wheel Diameter Req'd*: 15
*This Brake Kit may fit 15-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram
UPC Number
UPC 0

WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only


Forged Dynalite Dual Dynamic Rear Drag Brake Kit

Dual caliper kits provide the highest degree of safety, reliability, and unsurpassed stopping power for sportsman category dragsters and other cars that rely on rear brakes only for stopping power. With two calipers at each wheel, the fluid circuits for each caliper pair can be fully isolated with dual mount or tandem outlet master cylinders. Isolating the fluid circuits prevents complete system failures in the case of a problem with any single caliper or line. Dynamic rotor mounting eliminates distortion caused by the different thermal expansion rates between the steel rotor plate and the aluminum hat.


Fitment & Installation Details

Forged Dynalite Dual Dynamic Rear Drag Brake Kit Assembly Schematic

Forged Dynalite Dual Dynamic Rear Drag Brake Kit Assembly Schematic Forged Dynalite Dual Dynamic Rear Drag Brake Kit Assembly Schematic Zoom Image

Rear End / Axle Housing Flange
Confirm The Configuration!

Symmetrical End Flange
Confirm Offset Measurement!

Axle Flange Cross-Section
Search Rear Kits By Rear End/Axle Offset
caution AXLE OFFSET: 2.81
Check the diagram above and verify this measurement. This kit may be available in several different offsets.
Please call Wilwood with any questions: (805) 388-1188

Wheel Clearance Assembly Instructions

Wheel Clearance Diagram Wheel Clearance Diagram
Notes
1. Obsolete kit. Use substitute kit part #.




Compatible Vehicles for this Brake Kit

BRAKE KIT:   Forged Dynalite Dual Dynamic Rear Drag Brake Kit

This Brake Kit is Compatible with the Following Vehicle Makes:   Mark Williams

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

REAR END:   Symmetrical End - Rear Kit

AXLE OFFSET:   2.81

For a Complete Listing including ALL Makes, Models and Years, Please click on the Axle Offset.


Kit Components & Specifications
Calipers
Left Hand - Part No: 120-6818
Right Hand - Part No: 120-6818
Type: Forged Dynalite
Finish Color: Type III Anodize
Piston Count: 4
Piston 1 Bore (in): 1.75
Piston 2 Bore (in): 1.75
Piston Area (In²): 4.80
Piston Type: Stainless
Mount Type: Lug
Brake Pad Plate: 7112
Brake Pad Area (In²): 6.36
Brake Pad Volume (In³): 2.1
Pad Compound: PolyMatrix E
Forged Dynalite Caliper - Type III Anodize Forged Dynalite Caliper - Type III Anodize Zoom Image
Rotors
Left Hand - Part No: 160-7663
Right Hand - Part No: 160-7663
Type: Solid Steel Rotor
Style: Plain Face
Surface Finish: Black Oxide
Material: Steel
Outside Diameter (in): 11.44
Width (in): 0.35
Vane Count: Solid
Design Type: Solid
Bedded: No
Dynamically Balanced: No
Solid Steel Rotor - Steel - Black Oxide Solid Steel Rotor - Steel - Black Oxide Zoom Image
Rotor Hats
Hat - Part No: 170-7662
Type: Dynamic Drag Hat - Standard
Material: Aluminum
Finish Color: Black Anodize
Hat Offset Dimension (in): 1.960
Bolt Circle 1: 5 X 4.75
Bolt Circle 2: 5 X 5.00
Bolt Circle 3:
Stud Diameter - BC 1: 0.700
Stud Diameter - BC 2: 0.700
Stud Diameter - BC 3: 0.000
Dynamic Drag Hat - Standard - Aluminum - Black Anodize Dynamic Drag Hat - Standard - Aluminum - Black Anodize Zoom Image
Hubs
Hub - Part No:
Type:
Material:
Finish Color:
Mount Style:
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Parts & Accessories
Caliper Parts
O-ring Kit: 130-2655
Replacement Dustboot: N-A
Replacement Piston 1: 200-7528
Replacement Piston 2: 200-7528
Replacement Piston 3: N-A
Replacement Piston 4: N-A
CrossOver O-Ring Kit: 130-10540
Crossover Tube: N-A
Self-Bleeder Tube: N-A
Bridge Bolt Kit: N-A
Wear Plate - Left Hand: 300-5875
Wear Plate - Right Hand: 300-5875
Pad Retainer: 180-0054
Bleed Screw Kit: 220-0627
Brake Lines
Hat
Bolt Kit: 230-7666
Hub
Bolt Kit:

Additional related products:




More Details
More Details
More Details
More Details





 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright ©2021 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 3.05 June 23, 2023