Name: Forged Dynapro 6 Big Brake Front Brake Kit (5 x 5 Hub)
Brand: Wilwood
Availability: InStock

Front Brake Kit – Part No: 140-14531

Call (805) 388-1188

Forged Dynapro 6 Big Brake Front Brake Kit (5 x 5 Hub)

Prod #: 140-14531

Price: $1,632.38

Available Brake Kit #140-14531 Configurations

140-14531
Black Calipers
12.19-inch Rotors
Undrilled Rotors

140-14531-D
Black Calipers
12.19-inch Rotors
Drilled & Slotted Rotors

140-14531-DR
Red Calipers
12.19-inch Rotors
Drilled & Slotted Rotors

140-14531-R
Red Calipers
12.19-inch Rotors
Undrilled Rotors

*Line Kit Needed

220-8307
$76.95

Available Brake Kit #140-14531 Configurations

140-14531
Black Calipers
12.19-inch Rotors
Undrilled Rotors

140-14531-D
Black Calipers
12.19-inch Rotors
Drilled & Slotted Rotors

140-14531-DR
Red Calipers
12.19-inch Rotors
Drilled & Slotted Rotors

140-14531-R
Red Calipers
12.19-inch Rotors
Undrilled Rotors

*Line Kit Needed

220-8307
$76.95

Front Brake Kit — 140-14531

Kit Contents
Wilwood Forged Dynapro 6 Big Brake Front Brake Kit (5 x 5 Hub) Parts Laid Out - Black Powder Coat Caliper - Plain Face Rotor Click Image to Close
View Custom Caliper Colors

Kit Summary
OE Hub Offset:	.00
(Increase / Decrease Track Width)
Spindle Type:	Drop Spindle Factory Disc Spindle
Mount Type:	Lug
Caliper Type:	6 - Black Powder Coat
Rotor Diameter:	12.19
Min Wheel Diameter Req'd*:	15
*This Brake Kit may fit 15-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram

UPC Number
UPC	889545080872

	WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
	Applicable to Brake Pads Only

Forged Dynapro 6 Big Brake Front Brake Kit (5 x 5 Hub)

DynaPro 6 forged billet calipers are combined with 12.19” diameter rotors for this group of traditional non-ABS spindles on American muscle cars and vintage rods. The enhanced brake capacity and pad performance of the six piston calipers provide an intermediate level alternative to the bigger six piston kits. These kits are specially designed for 5 x 5.00" bolt circle wheels. DynaPro 6 kits compliment wheel, tire, and suspension upgrades on all types of custom show and high performance street / strip machines. A full range of caliper finishes and rotor designs enable the builder to personalize the style and optimize the brake performance for each individual application.

Fitment & Installation Details

Forged Dynapro 6 Big Brake Front Brake Kit (5 x 5 Hub) Assembly Schematic

Forged Dynapro 6 Big Brake Front Brake Kit (5 x 5 Hub) Assembly Schematic Zoom Image

Compatible Vehicles for this Brake Kit

BRAKE KIT: Forged Dynapro 6 Big Brake Front Brake Kit (5 x 5 Hub)

SPINDLE TYPE:

Drop Spindle;

Factory Disc Spindle;

This Brake Kit is Compatible with the Following Vehicle Makes: Ford Heidts Magnum Force Mercury

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

View All Vehicles

Caution
	THIS BRAKE KIT HAS A HUB OFFSET OF: .00 This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

Wheel Clearance	Assembly Instructions
Wheel Clearance Diagram Click Image to Close	Assembly Instructions

Notes
1. Kit fits 74-80 Pinto / Mustang II original disc brake spindles only. 2. Kit may fit some 15" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

Kit Components & Specifications

Calipers
Left Hand - Part No:	120-13429-BK
Right Hand - Part No:	120-13428-BK
Type:	Dynapro 6
Finish Color:	Black Powder Coat
Piston Count:	6
Piston 1 Bore (in):	1.62
Piston 2 Bore (in):	1.38
Piston 3 Bore (in):	1.38
Piston Area (In²):	5.06
Piston Type:	Stainless
Mount Type:	Lug
Brake Pad Plate:	6712
Brake Pad Area (In²):	7.3
Brake Pad Volume (In³):	2.4
Pad Compound:	BP-10
Dynapro 6 Caliper - Black Powder Coat Click Image to Close

Rotors
Left Hand - Part No:	160-5843
Right Hand - Part No:	160-5843
Type:	Ultralite HP 32
Style:	Plain Face
Surface Finish:	Plain
Material:	Iron
Outside Diameter (in):	12.19
Width (in):	0.81
Vane Count:	32 V
Design Type:	ULHP
Bedded:	No
Dynamically Balanced:	No
Ultralite HP 32 - Iron - Plain Click Image to Close

Rotor Hats
Hat - Part No:
Type:
Material:
Finish Color:
Hat Offset Dimension (in):
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Hubs
Hub - Part No:	270-14515
Type:	Hub - Vented Rotor Offset
Material:	Aluminum
Finish Color:	Bare
Mount Style:	Adapter
Bolt Circle 1:	5 x 5.00
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:	1/2-20
Stud Diameter - BC 2:
Stud Diameter - BC 3:
Hub - Vented Rotor Offset - Aluminum - Bare Click Image to Close

Parts & Accessories

Caliper Parts
O-ring Kit:	130-10535
Replacement Dustboot:	N-A
Replacement Piston 1:	200-7520
Replacement Piston 2:	200-7518
Replacement Piston 3:	200-7518
Replacement Piston 4:	N-A
CrossOver O-Ring Kit:	130-10540
Crossover Tube:	N-A
Self-Bleeder Tube:	N-A
Bridge Bolt Kit:	N-A
Wear Plate - Left Hand:	300-9707
Wear Plate - Right Hand:	300-9707
Pad Retainer:	300-17719
Bleed Screw Kit:	220-0627

*Brake Lines Needed
Front Line Kit:	220-8307

Hat
Bolt Kit:

Hub
Bolt Kit:

You May Also Be Interested In: