Name: Classic Series Dynalite Front Brake Kit
Brand: Wilwood
Availability: InStock

Front Brake Kit – Part No: 140-15272-R

Call (805) 388-1188

Classic Series Dynalite Front Brake Kit

Prod #: 140-15272-R

Price: $934.83

Available Brake Kit #140-15272 Configurations

140-15272
Anodize Calipers
11.00-inch Rotors
Undrilled Rotors

140-15272-R
Red Calipers
11.00-inch Rotors
Undrilled Rotors

Available Brake Kit #140-15272 Configurations

140-15272
Anodize Calipers
11.00-inch Rotors
Undrilled Rotors

140-15272-R
Red Calipers
11.00-inch Rotors
Undrilled Rotors

Front Brake Kit — 140-15272-R

Kit Contents
Wilwood Classic Series Dynalite Front Brake Kit Parts Laid Out - Red Powder Coat Caliper - Plain Face Rotor Click Image to Close
View Custom Caliper Colors

Kit Summary
OE Hub Offset:	+.47
(Increase / Decrease Track Width)
Spindle Type:	Drop Spindle Factory Disc Spindle Factory Drum Spindle
Mount Type:	Lug
Caliper Type:	4 - Red Powder Coat
Rotor Diameter:	11.00
Min Wheel Diameter Req'd*:	14
*This Brake Kit may fit 14-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram

UPC Number
UPC	889545076264

	WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
	Applicable to Brake Pads Only

Classic Series Dynalite Front Brake Kit

Wilwood’s Classic Series front disc brake kits for 1964 to 1974 GM A-body, X-body and 1967-69 F-body offer disc brake upgrade solutions for OEM Drum & Disc brake spindles. These kits feature the FDL-M four piston forged aluminum caliper and 11.00" diameter x 1.00” thick one-piece rotors. This new kit widens the track by only +.47" from original drum brake position or narrows by -.03" from the original disc brake rotor assembly. The FDL-M caliper is a modified version of the time-tested Forged Dynalite caliper, and provides the greatest amount of wheel clearance of any four piston caliper in its size class. Newly updated OEM style one-piece cast iron rotors with integrated hubs with 1/2"-20 screw in wheel studs simplify installation while providing superb dimensional stability and wear resistance. These versatile kits are easily optioned to suit the braking requirements and style preferences for a daily driver or the most discriminating show enthusiast. Intended vehicle applications require no modifications for installation, and clear most 14" OEM wheels. Classic Series FDL-M kits can be used with either manual or power boost master cylinders, and come complete with calipers, rotors, brackets, hardware, braided steel line kit and detailed installation instructions.

Fitment & Installation Details

Classic Series Dynalite Front Brake Kit Assembly Schematic

Classic Series Dynalite Front Brake Kit Assembly Schematic Zoom Image

*NOTE: Some applications for this kit have the steering arm to the rear of the spindle and others to the front. Also, some applications have room to mount the bracket and caliper on the steering arm side of the spindle while the steering arm may interfere in other applications. The brackets in this kit may be mounted on either the front or rear side of the spindle. If mounting to the front of the spindle, the right hand bracket will be used on the left hand side of the vehicle and vice versa. This drawing shows a typical 1967-1969 Camaro left side application where the steering arm is to the rear and there is room to mount the caliper on the steering arm side as shown. Determine which way the bracket and caliper will fit best on your application.

Compatible Vehicles for this Brake Kit

BRAKE KIT: Classic Series Dynalite Front Brake Kit

SPINDLE TYPE:

Drop Spindle;

Factory Disc Spindle;

Factory Drum Spindle ;

This Brake Kit is Compatible with the Following Vehicle Makes: Buick Chevrolet Ford GMC Heidts Mercury Oldsmobile Pontiac Ridetech

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

View All Vehicles

Caution
	THIS BRAKE KIT HAS A HUB OFFSET OF: +.47 This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

Wheel Clearance	Assembly Instructions
Wheel Clearance Diagram Click Image to Close	Assembly Instructions

Notes

Kit Components & Specifications

Calipers
Left Hand - Part No:	120-13551-RD
Right Hand - Part No:	120-13551-RD
Type:	Forged Dynalite-M
Finish Color:	Red Powder Coat
Piston Count:	4
Piston 1 Bore (in):	1.75
Piston 2 Bore (in):	1.75
Piston Area (In²):	4.80
Piston Type:	Stainless
Mount Type:	Lug
Brake Pad Plate:	7112
Brake Pad Area (In²):	6.36
Brake Pad Volume (In³):	2.1
Pad Compound:	BP-10
Forged Dynalite-M Caliper - Red Powder Coat Click Image to Close

Rotors
Left Hand - Part No:	160-15132
Right Hand - Part No:	160-15132
Type:	1 PC Hub and Rotor
Style:	Plain Face
Surface Finish:	Plain
Material:	Iron
Outside Diameter (in):	11.00
Width (in):	1.00
Vane Count:	Vented
Design Type:	ULHP
Bedded:	No
Dynamically Balanced:	No
1 PC Hub and Rotor - Iron - Plain Click Image to Close

Rotor Hats
Hat - Part No:
Type:
Material:
Finish Color:
Hat Offset Dimension (in):
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Hubs
Hub - Part No:
Type:
Material:
Finish Color:
Mount Style:
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Parts & Accessories

Caliper Parts
O-ring Kit:	130-2655
Replacement Dustboot:	N-A
Replacement Piston 1:	200-7528
Replacement Piston 2:	200-7528
Replacement Piston 3:	N-A
Replacement Piston 4:	N-A
CrossOver O-Ring Kit:	130-10540
Crossover Tube:	N-A
Self-Bleeder Tube:	N-A
Bridge Bolt Kit:	N-A
Wear Plate - Left Hand:	300-5875
Wear Plate - Right Hand:	300-5875
Pad Retainer:	180-0056
Bleed Screw Kit:	220-0627

Brake Lines
Front Line Kit:	220-7699

Hat
Bolt Kit:

Hub
Bolt Kit:

You May Also Be Interested In: