Front Brake Kit – Part No: 140-14075
Call (805) 388-1188
Forged Superlite 4R Big Brake Front Brake Kit (Race)
Prod #: 140-14075
Price: $2,202.20

Front Brake Kit — 140-14075


Kit Contents
Wilwood Forged Superlite 4R Big Brake Front Brake Kit (Race) Parts Laid Out - Type III Anodize Caliper - Plain Face Rotor Wilwood Forged Superlite 4R Big Brake Front Brake Kit (Race) Parts Laid Out - Type III Anodize Caliper - Plain Face Rotor Zoom Image


View Custom Caliper Colors

Kit Summary
Spindle Type: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 - Type III Anodize
Rotor Diameter: 13.06
Min Wheel Diameter Req'd*: 17
*This Brake Kit may fit 17-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram
UPC Number
UPC 889545089462

WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only


Forged Superlite 4R Big Brake Front Brake Kit (Race)

This kit is configured for dedicated road racing on all 1998-2002 Camaros and Firebirds, and any 1993-97 models that have been upgraded with 1998-02 spindles racing in categories that do not allow slotted face rotors. The four piston FSL4R/ST calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec hard anodized, medium gray color finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE power brake booster and master cylinder, and are easily configured with manual brake conversions and balance bar pedals using appropriately sized master cylinders. Spec37 alloy HD competition series 13.06” diameter directional vane rotors provide high cooling efficiency with rugged durability and thermal stability in sustained high heat competition. Unsprung and rotating weight are minimized with forged aluminum hats for mounting the rotors to the OE hubs. Mounting brackets, including all premium grade fasteners, secure the calipers to the spindles in the stock location, without the need for modifications. This championship proven system is completed with high temperature, high friction, endurance race compound pads selected specifically by application. Stainless steel braided flexlines are included in each kit to complete the installation.


Fitment & Installation Details


Forged Superlite 4R Big Brake Front Brake Kit (Race) Assembly Schematic

Forged Superlite 4R Big Brake Front Brake Kit (Race) Assembly Schematic Forged Superlite 4R Big Brake Front Brake Kit (Race) Assembly Schematic Zoom Image


Compatible Vehicles for this Brake Kit
BRAKE KIT:   Forged Superlite 4R Big Brake Front Brake Kit (Race)
SPINDLE TYPE:  
Factory Disc Spindle;
This Brake Kit is Compatible with the Following Vehicle Makes: Chevrolet Pontiac

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

View All Vehicles
lookup vehicles
Caution
Caution THIS BRAKE KIT HAS A HUB OFFSET OF:
This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

Wheel Clearance Assembly Instructions

Wheel Clearance Diagram Wheel Clearance Diagram Zoom Image



Assembly Instructions
Notes
1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
2. Kit may fit some 17" wheels. Check wheel clearance diagram in kit installation instructions before purchase.



Kit Components & Specifications
Calipers
Left Hand - Part No: 120-13266
Right Hand - Part No: 120-13265
Type: Forged Superlite 4R
Finish Color: Type III Anodize
Piston Count: 4
Piston 1 Bore (in): 1.88
Piston 2 Bore (in): 1.62
Piston Area (In²): 4.84
Piston Type: Thermlock
Mount Type: Radial
Brake Pad Plate: 7420
Brake Pad Area (In²): 8.2
Brake Pad Volume (In³): 4.9
Pad Compound: BP-30
Forged Superlite 4R Caliper - Type III Anodize Forged Superlite 4R Caliper - Type III Anodize Zoom Image
Rotors
Left Hand - Part No: 160-12787
Right Hand - Part No: 160-12786
Type: HD 48 Curved Vane
Style: Plain Face
Surface Finish: Plain
Material: Spec-37 Iron
Outside Diameter (in): 13.06
Width (in): 1.25
Vane Count: 48 CV
Design Type: HD
Bedded: No
Dynamically Balanced: Yes
HD 48 Curved Vane - Spec-37 Iron - Plain HD 48 Curved Vane - Spec-37 Iron - Plain Zoom Image
Rotor Hats
Hat - Part No: 170-6837
Type: Big Brake Hat - Short Offset
Material: Aluminum
Finish Color: Black E-Coat
Hat Offset Dimension (in): 0.880
Bolt Circle 1: 5 x 4.50
Bolt Circle 2: 5 x 4.75
Bolt Circle 3:
Stud Diameter - BC 1: 0.560
Stud Diameter - BC 2: 0.520
Stud Diameter - BC 3: 0.000
Big Brake Hat - Short Offset - Aluminum - Black E-Coat Big Brake Hat - Short Offset - Aluminum - Black E-Coat Zoom Image
Hubs
Hub - Part No:
Type:
Material:
Finish Color:
Mount Style:
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Parts & Accessories
Caliper Parts
O-ring Kit: 130-5100
Replacement Dustboot: N-A
Replacement Piston 1: 200-7550
Replacement Piston 2: 200-7553
Replacement Piston 3: N-A
Replacement Piston 4: N-A
CrossOver O-Ring Kit: 130-10540
Crossover Tube: N-A
Self-Bleeder Tube: N-A
Bridge Bolt Kit: 230-5978
Wear Plate - Left Hand: 300-5923
Wear Plate - Right Hand: 300-5922
Pad Retainer: N-A
Bleed Screw Kit: 220-0627
Brake Lines
Front Line Kit:
220-6746
Hat
Bolt Kit: 230-4572
Hub
Bolt Kit:
Products commonly used with this item:




$89.77
More Details





Additional related products:




More Details
More Details
More Details
More Details





 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright ©2021 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 3.05 June 23, 2023