D154-Dust Seal Single Piston Floater Caliper – Part No: 120-15796
Call (805) 388-1188
D154-Dust Seal Single Piston Floater
Prod #: 120-15796
Price: $249.46
D154-Dust Seal Single Piston Floater - Product Summary
Caliper No: 120-15796
Wilwood D154-Dust Seal Single Piston Floater Caliper Wilwood D154-Dust Seal Single Piston Floater Caliper Zoom Image

Pistons
Piston Count 1
Piston Area (in²) 4.90
Piston Type Stainless
Dust Boot Yes
Rotor Dimensions
Rotor Width (in) 1.04
Rotor Diameter(in) 12.19
Pad Dimensions
Pad Area (in²) 8.7
Pad Volume (in³) 2.9
Duty Rating & Material
Material Forged Aluminium
Weight(Lbs) 4.7
Colors & Finish
Color Anodize
Finish Type III Anodize

Mounting
Mount Center(in) 5.46
Mount Position
Mount Side Universal
Mount Type Floating
UPC Number
UPC 889545100211
Product Documents
Product Data Sheet

Installation Instructions


WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only

120-15796 - Product Description

D154-Dust Seal Single Piston Floater

Wilwood's D154-DS forged billet caliper is a direct bolt-on, lightweight, high-strength, extreme duty alternative to the OE cast iron calipers that were used on a wide range of factory disc brake equipped mid-size GM cars and small trucks beginning in 1978. Use of this caliper can still be found on some GM models as late as the year 2002. D154-DS calipers incorporate an exclusive dust wiper seal that further protects the piston bore from dust and corrosion, allowing the caliper to be used in locales that mandate a method of environmental sealing. The wide spread and affordable availability of D154-DS calipers and brake pad compounds also made it a popular choice in a number of restricted class competition categories and drum to disc conversions on all types of hot rods and street machines.

A large 2.50" single piston stainless steel pistons are used to resist corrosion and retard heat transfer from the pads into the caliper body. High temperature, square faced bore seals are used to provide controlled piston retraction and reliable performance from the wider sealing face and also incorporate an additional an exclusive dust wiper seal that further protects the piston bore from dust and corrosion This combination of components is a proven performer with long service life and a history of reliable performance in any type of driving environment, including extreme sustained high temperature racing applications. The caliper slide pin holes are fitted with dampening rings to minimize noise from vibration. The caliper is also fitted with bleed screws on both ends to facilitate mounting in any left hand or right hand, front leading mount, or rear trailing mount locations.



Product Specifications

Rotor Compatibility
Rotor Width (in) 1.04
Maximum Rotor Width (in) 1.04
Minimum Rotor Width (in) 0.87
Maximum Rotor Diameter(in) 12.19
Minimum Rotor Diameter(in) 11.00

Brake Pad Specifications
Brake Pad Type 1 D154
Brake Pad Type 2 N-A
Brake Pad Type 3 N-A
Total Pad Area (in²) 8.7
Total Pad Volume (in³) 2.9
Mount
Piston Specifications
Piston 1 Bore (in) 2.50
Piston 2 Bore (in)
Piston 3 Bore (in)
Total Piston Area (in²) 4.90

Mounting Specifications
Mount Type Floating
Mount Side Universal
Mount Center(in) 5.46
Mount Hole Size(in) 0.69
Mount Height(in) 0.37
Inlet Thread Size M10 x 1.50
Pad Dimensions & Part Numbers
Pad Dimensions for the D154-Dust Seal Single Piston Floater Pad Dimensions for the D154-Dust Seal Single Piston Floater Zoom Image
Axle Set P/N
Pad Type
Compound
Non-Bedded Pads - by Compounds
D154
BP-10
D154
BP-10
D154
BP-20
D154
BP-28
D154
BP-35
D154
BP-40
D154
PolyMatrix A
Mount Dimensions & Part Numbers

Dimensions for the D154-Dust Seal Single Piston Floater Dimensions for the D154-Dust Seal Single Piston Floater Zoom Image

Additional Notes


Parts & Accessories

O-Ring Kit 130-17064
Replacement Dust Boot N-A
Replacement Piston 1 200-11793
Replacement Piston 2 N-A
Replacement Piston 3 N-A
Replacement Piston 4 N-A
Cross-Over O-Ring Kit N-A
Bridge Bolt Kit N-A
Wear Plate L/H N-A
Wear Plate R/H N-A
Pad Retainer N-A
Bleed Screw Kit 220-0627
Self Bleeder Tube N-A
Cross-Over Tube N-A
Products commonly used with this item:




$16.74
More Details
$22.44
More Details





Additional related products:




More Details





 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright ©2021 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 3.04 May 22, 2023