Brake Pad Part No: 150-14356K

Street Performance / Racing Pads

Pad#: 4812
Compound: BP-40
Prod #: 150-14356K
Price: $311.64
BP-40
BP-40 Brake Pads Plate Type
Pad Dimensions
Thickness(in) .49
Area(in²) 5.1
Volume(in³) 1.71
Bedded N
UPC Number
UPC 889545072976
Dust & Noise Ratings
Dust Production Rating N-A
Pad Noise Rating N-A
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

BP-40 Compound

Pad Characteristics

  • High friction pad with aggressive initial response
  • Good low temperature response
  • Low wear rate during sustained high heat braking
  • Predictable and linear response with excellent modulation
  • High heat fade resistance

Pad Applications

  • Racing only - Not for street use
  • Road course
  • Oval pavement
  • Dirt all classes
  • Off road

Rotor Material

  • Steel
  • Stainless Steel
  • Iron
  • Super Alloy
  • Titanium
BP-40 Performance Stats BP-40 Performance Stats Zoom Image
BP-40 Friction Coefficient and Temperature Values BP-40 Friction Coefficient and Temperature Values Zoom Image

The above friction data (μ) was recorded through braking cycles from 95 mph to 40 mph at a 0.5g deceleration. Snubs were consecutively done until rotor temperature reached 1300°F. This graph represents average data and is for general trend visualisations only comparing Wilwood pads. Chart data should not be used in comparison with other manufacturer's data. Test conditions, variables, and environment can affect test results.

Temperature range and overall friction value are the primary considerations for pad selection. The pads must maintain the proper amount of friction for stopping power within the temperatures that will be realized on the track. Overall wear rate must also be considered. For most asphalt and road race applications, compounds in the high-temperature range over 1000°F are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on-track performance. If pad fade (friction loss) due to overheating occurs, improved cooling, a heavier rotor, or a higher temperature range pad may become necessary.

Wilwood Compatible Caliper(s) for Pad #4812

DPC56 Caliper
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 2.46
Pad Area Range (in²) 5.1
Pad Volume Range (in³) 1.71
Max Rotor Widths (in) 1.04
Max Rotor Diameters (in) 12.00

DPC56 Caliper Calipers

DPC56 rear calipers are engineered as a high performance street and custom replacement for Corvettes and hot rods using Corvette suspension. DPC56 calipers add high-tech styling and provide the positive response and balanced pad loading provided by a fixed mount, four piston caliper. The DPC56 is a direct bolt-on replacement for the OE calipers on all models of the C5 from 1997 to 2004, and all base model C6’s from 2005 to 2013 using 12.00” diameter rear rotors. The calipers attach directly to the Corvette spindle without the need for brackets or adapters and accept all types of OE banjo bolt style brake hoses. View DPC56 Calipers
Dynapro Lug Mount Low-Profile
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 1.98
Pad Area Range (in²) 5.1
Pad Volume Range (in³) 1.71
Max Rotor Widths (in) 0.83
Max Rotor Diameters (in) 11.00

Dynapro Lug Mount Low-Profile Calipers

The DynaPro-Low Profile Lug Mount (DP-LP) forged billet caliper represents the newest generation of calipers available as an upgrade or replacement for applications previously using the long-standing Dynalite model series. DP calipers combine pure race technology with several new exclusive Wilwood performance enhancements. A sleek profile with superior strength and a fully detail machined finish provide the performance and looks for competition or show. Especially designed for limited outboard rotor hat clearance and narrow swept area rotors. View Dynapro Low-Profile Calipers
Forged Dynapro Lug Mount Low-Profile
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 1.98 - 3.00
Pad Area Range (in²) 5.1
Pad Volume Range (in³) 1.71
Max Rotor Widths (in) 0.83
Max Rotor Diameters (in) 13.06

Forged Dynapro Lug Mount Low-Profile Calipers

The Forged DynaPro-Low Profile Lug Mount (FDP-LP) forged billet caliper represents the newest generation of calipers available as an upgrade or replacement for applications previously using the long-standing Dynalite model series. DP calipers combine pure race technology with several new exclusive Wilwood performance enhancements. A sleek profile with superior strength and a forged machined finish provide the performance and looks for competition or show. Especially designed for limited outboard rotor hat clearance and narrow swept area rotors. View Forged Dynapro Lug Mount Low-Profile Calipers
Forged Dynapro Lug Mount Low-Profile
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 1.98 - 3.00
Pad Area Range (in²) 5.1
Pad Volume Range (in³) 1.71
Max Rotor Widths (in) 0.83
Max Rotor Diameters (in) 13.06

Forged Dynapro Lug Mount Low-Profile Calipers

The Forged DynaPro-Low Profile Lug Mount (FDP-LP) forged billet caliper represents the newest generation of calipers available as an upgrade or replacement for applications previously using the long-standing Dynalite model series. DP calipers combine pure race technology with several new exclusive Wilwood performance enhancements. A sleek profile with superior strength and a forged machined finish provide the performance and looks for competition or show. Especially designed for limited outboard rotor hat clearance and narrow swept area rotors. View Forged Dynapro Lug Mount Low-Profile Calipers
Forged Dynapro Lug Mount LP-Dust Seal
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 1.98
Pad Area Range (in²) 5.1
Pad Volume Range (in³) 1.71
Max Rotor Widths (in) 0.83
Max Rotor Diameters (in) 13.06

Forged Dynapro Lug Mount LP-Dust Seal Calipers

The Forged DynaPro-Low Profile Lug Mount Dust Seal (FDPLP-DS) forged billet caliper represents the newest generation of calipers available as an upgrade or replacement for applications previously using the long-standing Dynalite model series. FDPLP calipers combine pure race technology with several new exclusive Wilwood performance enhancements. A sleek profile with superior strength and a forged machined finish provide the performance and looks for competition or show. Especially designed for limited outboard rotor hat clearance and narrow swept area rotors. Dust seal calipers also include Wilwood's proprietary dust seal technology. View Forged Dynapro Lug Mount LP-Dust Seal Calipers
Narrow Dynapro-P Radial Mount
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 1.98
Pad Area Range (in²) 5.1
Pad Volume Range (in³) 1.71
Max Rotor Widths (in) 0.86
Max Rotor Diameters (in) 0.00

Narrow Dynapro-P Radial Mount Calipers

Wilwood Narrow DynaPro four piston radial mount calipers combines the versatility of radial mounting with a sleek profile, superior strength, and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds, the DynaPro has become a favored choice for a broad range of sports, rally, and off-road driving applications. View Narrow Dynapro 4 Piston Radial Mount Calipers
Narrow Dynapro-P Radial Mount
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 1.98
Pad Area Range (in²) 5.1
Pad Volume Range (in³) 1.71
Max Rotor Widths (in) 0.99
Max Rotor Diameters (in) 0.00

Narrow Dynapro-P Radial Mount Calipers

Wilwood Narrow DynaPro four piston radial mount calipers combines the versatility of radial mounting with a sleek profile, superior strength, and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds, the DynaPro has become a favored choice for a broad range of sports, rally, and off-road driving applications. View Narrow Dynapro 4 Piston Radial Mount Calipers

 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright ©2021 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 3.05 June 23, 2023