Brake Pad Part No: 15Q-6828K

Street Performance / Racing Pads

Pad#: 7416
Compound: PolyMatrix Q
Prod #: 15Q-6828K
Price: $152.74
PolyMatrix Q
PolyMatrix Q Brake Pads Plate Type
Pad Dimensions
Thickness(in) .65
Area(in²) 8.2
Volume(in³) 3.8
Bedded N
UPC Number
UPC 889545037319
Dust & Noise Ratings
Dust Production Rating Very Low
Pad Noise Rating Very Low
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

PolyMatrix Q Compound

Pad Characteristics

  • Medium friction pad with a smooth initial response
  • Low wear rate at low temperatures
  • Excellent pad for aluminum and stainless steel rotors in racing, low rotor wear and good feel
  • High performance ceramic based formula
  • Lowest dust and noise

Pad Applications

  • Street use okay
  • Custom show cars
  • Street rods
  • Muscle cars
  • Race cars with aluminum or stainless steel rotors

Rotor Material

  • Stainless Steel
  • Iron
  • Aluminum
PolyMatrix Q Performance Stats PolyMatrix Q Performance Stats Zoom Image
PolyMatrix Q Friction Coefficient and Temperature Values PolyMatrix Q Friction Coefficient and Temperature Values Zoom Image

The above friction data (μ) was recorded through braking cycles from 95 mph to 40 mph at a 0.5g deceleration. Snubs were consecutively done until rotor temperature reached 1300°F. This graph represents average data and is for general trend visualisations only comparing Wilwood pads. Chart data should not be used in comparison with other manufacturer's data. Test conditions, variables, and environment can affect test results.

Temperature range and overall friction value are the primary considerations for pad selection. The pads must maintain the proper amount of friction for stopping power within the temperatures that will be realized on the track. Overall wear rate must also be considered. For most asphalt and road race applications, compounds in the high-temperature range over 1000°F are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on-track performance. If pad fade (friction loss) due to overheating occurs, improved cooling, a heavier rotor, or a higher temperature range pad may become necessary.

Wilwood Compatible Caliper(s) for Pad #7416

Billet Narrow Superlite 4
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 2.46
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.10
Max Rotor Diameters (in) 14.00

Billet Narrow Superlite 4 Calipers

The Superlite caliper series has set the standard for many years in short track, late model, modified and open wheel competition. It has also enjoyed prominence in a variety of road-race, off-road, rally and sport driving applications. Starting at 4.40 pounds, the Forged Billet Narrow Superlite (FNSLR) is innovation to this series from Wilwood. New and adaptive technologies have been applied providing substantial improvements in strength, fluid volume displacement, and overall performance. FNSL4R calipers are the the only Superlite series calipers with piston dust boots, primarily for export mandates. View Billet Narrow Superlite 4R Radial Mount Calipers
Billet Narrow Superlite 4
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 2.46 - 4.80
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 14.00

Billet Narrow Superlite 4 Calipers

The Superlite caliper series has set the standard for many years in short track, late model, modified and open wheel competition. It has also enjoyed prominence in a variety of road-race, off-road, rally and sport driving applications. Starting at 4.40 pounds, the Forged Billet Superlite (FSL) is the newest innovation to this series from Wilwood. New and adaptive technologies have been applied providing substantial improvements in strength, fluid volume displacement, and overall performance. View Billet Narrow Superlite 4R Radial Mount Calipers
Billet Narrow Superlite 4-Race
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 2.46 - 4.80
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 14.00

Billet Narrow Superlite 4-Race Calipers

The Superlite caliper series once again has a cutting-edge performer in the new differential piston bore version. Differential piston bores compensate for leading-edge mechanical loading and temperature variance across the pad face to reduce pad taper wear in sustained high temperature applications. Thermlock® pistons in the FSL4/ST and heavy wall stainless steel pistons in the FSL4 models provide choices for two levels of protection against conductive heat transfer to the seals, fluid, and caliper body. Both the FSL4 and FSL4/ST start at just 4.40 pounds. View Billet Narrow Superlite 4R Radial Mount Calipers
Billet Narrow Superlite 6 Lug Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 4.04
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.10
Max Rotor Diameters (in) 14.00

Billet Narrow Superlite 6 Lug Mount Calipers

The 2nd generation of the Narrow SL6 series has been redesigned with Wilwood’s latest technology. High strength Billet bodies with internal crossover passages allow the calipers to mount in either front or rear of spindle applications with same part number. With Same 3.50" centered lug mounting of original Narrow Superlite caliper. Each caliper is precision CNC machined from high strength Billet Forging with a re-profiled outer body that enhances wheel clearance and appearance. Calipers are available in Black, Red powder coat and a show quality polished finish to compliment any application. View Billet Narrow Superlite 6 Lug Mount Calipers
Billet Narrow Superlite 6 Lug Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 4.04
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.10
Max Rotor Diameters (in) 14.00

Billet Narrow Superlite 6 Lug Mount Calipers

The billet SL6 series integrates "Big Brake" style and Wilwood's latest technology into the traditional 3.50" centered lug mount Superlite caliper category. Each caliper is precision CNC machined from high strength billet into three specialized configurations that cover a broad range of competition and sports driving applications. View Billet Narrow Superlite 6 Lug Mount Calipers
Billet Narrow Superlite 6 Radial Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 4.04
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 14.00

Billet Narrow Superlite 6 Radial Mount Calipers

The billet SL6R series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. View Billet Narrow Superlite 6R Radial Mount Calipers
Billet Narrow Superlite 6 Radial Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 4.04
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 14.00

Billet Narrow Superlite 6 Radial Mount Calipers

The billet SL6R series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. View Billet Narrow Superlite 6R Radial Mount Calipers
Forged Narrow Superlite
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 3.00
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 0.81
Max Rotor Diameters (in) 13.06

Forged Narrow Superlite Calipers

Text Description Needed. View Forged Superlite Calipers
Forged Narrow Superlite 4 Dust Seal Radial Mount
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 1.98 - 2.46
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.10
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 4 Dust Seal Radial Mount Calipers

The Forged Narrow Superlite 4R Dust Seal (FNSL4R-DS) is our newest version for the venerable Superlite caliper series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. The addition of Wilwood’s exclusive wiper dust seal allows these calipers to be used in areas that may mandate environmental sealing. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. View FNSL4R-Dust Seal Calipers
Forged Narrow Superlite 4 Radial Mount
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 1.98 - 2.46
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.10
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 4 Radial Mount Calipers

FNSLR/ST forged billet calipers, with four Thermlock pistons, deliver championship proven performance with piston sizes to provide matched rear braking bias for use with the Aero6/ST or other larger piston front calipers. FNSL4R/ST calipers incorporate race technology into a radial mount body design with widespread adaptability. Including competition update options for all FNSL4R rear Big Brake kits. Thermlock pistons, high-temp seals, SRS bridge plates, and two-piece bleed screw assemblies are standard in all calipers. Four high-temp race only brake pad compounds in the 7416 pad type allow precise tuning of the brake response, friction requirements and temperature range. View FNSL4R Calipers
Forged Narrow Superlite 4 Radial Mount
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 1.98 - 4.80
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 4 Radial Mount Calipers

The Forged Narrow Superlite 4R (FNSL4R) is our newest version for the venerable Superlite caliper series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. View FNSL4R Calipers
Forged Narrow Superlite 4 Radial MT-Quick-Silver
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 1.98 - 2.46
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.10
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 4 Radial MT-Quick-Silver Calipers

Quick-Silver FNSL4R four piston calipers add the option of the new nickel finish to the most popular calipers used in our rear Big Brake kit line. These smaller volume 4 piston calipers provide matched rear brake bias when using six piston or large four piston front calipers. Forged narrow Superlite calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power over a broad range of vehicle applications. Stainless steel pistons, high-temp seals, SRS bridge plates, and two-piece bleed screw assemblies are standard in all calipers. Three high performance street, and four high-temp race only brake pad compounds in the 7416 pad type, allow precise tuning of the brake response, friction requirements and temperature range for all types of high performance and competition applications. View FNSL4R Calipers
Forged Narrow Superlite 4 Rdl MT-Quick-Silver/ST
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 1.98 - 2.46
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.10
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 4 Rdl MT-Quick-Silver/ST Calipers

Quick-Silver / ST series FNSLR/ST nickel plated forged billet calipers, with four Thermlock pistons, deliver championship proven performance with piston sizes to provide matched rear braking bias for use with the W6AR/ST or other larger piston front calipers. FNSL4R/ST calipers incorporate race technology into a radial mount body design with widespread adaptability. Including competition update options for all FNSL4R rear Big Brake kits. Thermlock pistons, high-temp seals, SRS bridge plates, and two-piece bleed screw assemblies are standard in all calipers. Four high-temp race only brake pad compounds in the 7416 pad type allow precise tuning of the brake response, friction requirements and temperature range View FNSL4R Calipers
Forged Narrow Superlite 6 Dust Seal Radial Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 4.04
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 6 Dust Seal Radial Mount Calipers

The Forged Narrow Superlite 6R Dust Seal (FNSL6R-DS) is our newest version for the venerable Superlite caliper series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. The addition of Wilwood’s exclusive wiper dust seal allows these calipers to be used in areas that may mandate environmental sealing. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. View FNSL6R-Dust Seal Calipers
Forged Narrow Superlite 6 Radial Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 4.86
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 6 Radial Mount Calipers

The Forged Narrow Superlite 6R (FNSL6R) is our newest version for the venerable Superlite caliper series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. View FNSL6R Calipers
Forged Narrow Superlite 6 Radial Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 3.46 - 4.86
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 6 Radial Mount Calipers

The Forged Narrow Superlite 6R (FNSL6R) is our newest version for the venerable Superlite caliper series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. View FNSL6R Calipers
Forged Narrow Superlite 6 Radial Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 4.04
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 6 Radial Mount Calipers

The Forged Narrow Superlite 6R/ST (FNSL6R/ST) is our newest version for the venerable Superlite caliper series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate Wilwood's latest technology and the addition of Thermlock insulated pistons to generate big stopping power in extreme high temperature environments over a broad range of vehicle and racing applications. View FNSL6R Calipers
Forged Narrow Superlite 6 Radial Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 3.46
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.10
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 6 Radial Mount Calipers

The Forged Narrow Superlite 6R/ST (FNSL6R/ST) is our newest version for the venerable Superlite caliper series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate Wilwood's latest technology and the addition of Thermlock insulated pistons to generate big stopping power in extreme high temperature environments over a broad range of vehicle and racing applications. View FNSL6R Calipers
Forged Narrow Superlite 6 Radial Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 4.04
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.10
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 6 Radial Mount Calipers

The Forged Narrow Superlite 6R/ST (FNSL6R/ST) is our newest version for the venerable Superlite caliper series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate Wilwood's latest technology and the addition of Thermlock insulated pistons to generate big stopping power in extreme high temperature environments over a broad range of vehicle and racing applications. View FNSL6R Calipers
Forged Narrow Superlite 6 Radial Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 4.04
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 0.38
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 6 Radial Mount Calipers

The Forged Narrow Superlite 6R/ST (FNSL6R/ST) is our newest version for the venerable Superlite caliper series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate Wilwood's latest technology and the addition of Thermlock insulated pistons to generate big stopping power in extreme high temperature environments over a broad range of vehicle and racing applications. View FNSL6R Calipers
Forged Narrow Superlite 6 Radial MT-QS/ST
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 4.04
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 6 Radial MT-QS/ST Calipers

Quick-Silver / ST FNSL6R six piston calipers add the option of the new nickel finish and 6 Thermlock pistons to the most popular calipers used in our Big Brake kit line. Forged narrow Superlite calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power over a broad range of vehicle applications. Thermlock insulated pistons, high-temp seals, SRS bridge plates, and two-piece bleed screw assemblies are standard in all calipers. Three high performance street, and four high-temp race only brake pad compounds in the 7416 pad type, allow precise tuning of the brake response, friction requirements and temperature range for all types of high performance and competition applications. View FNSL6R Calipers
Forged Narrow Superlite 6 Radial MT-Quick-Silver
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 4.04
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 14.00

Forged Narrow Superlite 6 Radial MT-Quick-Silver Calipers

Quick-Silver FNSL6R six piston calipers add the option of the new nickel finish to the most popular calipers used in our Big Brake kit line. Forged narrow Superlite calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power over a broad range of vehicle applications. Stainless steel pistons, high-temp seals, SRS bridge plates, and two-piece bleed screw assemblies are standard in all calipers. Three high performance street, and four high-temp race only brake pad compounds in the 7416 pad type, allow precise tuning of the brake response, friction requirements and temperature range for all types of high performance and competition applications. View FNSL6R Calipers
SLC56 Caliper
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 4.12
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 3.8
Max Rotor Widths (in) 1.25
Max Rotor Diameters (in) 12.80

SLC56 Caliper Calipers

SLC56 front calipers are engineered as a high performance street and custom replacement for Corvettes and hot rods using Corvette suspension. SLC56 calipers add high-tech styling and provide the positive response and balanced pad loading provided by a fixed mount, four piston caliper. The SLC56 is a direct bolt-on replacement for the OE calipers on all models of the C5 from 1997 to 2004, and all base model C6’s from 2005 to 2013 using 12.8” diameter front rotors. The calipers attach directly to the Corvette spindle without the need for brackets or adapters and accept all types of OE banjo bolt style brake hoses. View SLC56 Calipers

 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright ©2021 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 3.05 June 23, 2023