Brake Pad Part No: 150-10-D0045K


Street Performance / Racing Pads

Pad#: D45
Compound: BP-10
Prod #: 150-10-D0045K
Price: $59.83
BP-10
BP-10 Brake Pads and Box
Picture shown is for illustrative purposes only
Pad Dimensions
Thickness(in) .585
Area(in²)
Volume(in³)
Bedded N
UPC Number
UPC 889545111583
Dust & Noise Ratings
Dust Production Rating Low
Pad Noise Rating Low
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
NSF Int’l LeafMark certified friction formulation.Compliant with SAE J661 industry standards.

BP-10 Compound

Pad Characteristics

  • Medium friction pad
  • Gradual response, low wear rate on iron rotors
  • Low to medium wear rate at low temperatures
  • Low dust and noise
  • High performance street compound with improved friction, lower wear and lower dust levels than standard replacement pads

Pad Applications

  • Street use okay
  • Street
  • Muscle cars
  • Drag race
  • Light to medium braking on dirt including late models and modified

Rotor Material

  • Steel
  • Iron
BP-10 Performance Stats BP-10 Performance Stats Zoom Image
BP-10 Friction Coefficient and Temperature Values BP-10 Friction Coefficient and Temperature Values Zoom Image

The above friction data (μ) was recorded through braking cycles from 95 mph to 40 mph at a 0.5g deceleration. Snubs were consecutively done until rotor temperature reached 1300°F. This graph represents average data and is for general trend visualisations only comparing Wilwood pads. Chart data should not be used in comparison with other manufacturer's data. Test conditions, variables, and environment can affect test results.

Temperature range and overall friction value are the primary considerations for pad selection. The pads must maintain the proper amount of friction for stopping power within the temperatures that will be realized on the track. Overall wear rate must also be considered. For most asphalt and road race applications, compounds in the high-temperature range over 1000°F are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on-track performance. If pad fade (friction loss) due to overheating occurs, improved cooling, a heavier rotor, or a higher temperature range pad may become necessary.

Wilwood Compatible Caliper(s) for Pad #D45

D45 Front Dual Piston Caliper
Caliper Dimensions
Piston Count 2
Piston Area Range (in²) 2.77
Pad Area Range (in²) 0
Pad Volume Range (in³) 0
Max Rotor Widths (in) 0.00
Max Rotor Diameters (in) 0.00

D45 Front Dual Piston Caliper Calipers

Wilwood’s D45 street and racing calipers provide the ultimate in strength, weight savings, and high efficiency brake clamping for Porsche 911 with "A"or "S" 3.50" OEM front calipers. These calipers feature a high strength, light-weight 5.1 pound forged aluminum body fitted with machined stainless steel pistons. All D45 series calipers utilize the same 3.50" mounting centers, height and offset as the traditional 911 "A" or "S" calipers. The calipers accept Wilwood and FMSI standard D45 brake pads and are compatible with stock replacement rotors and master cylinders. D45 calipers are offered in Type III hard anodize finish and also in Black, Red and Yellow coat finishes. View D45 Calipers
D45 Front Dual Piston Caliper
Caliper Dimensions
Piston Count 2
Piston Area Range (in²) 2.77
Pad Area Range (in²) 0
Pad Volume Range (in³) 0
Max Rotor Widths (in) 0.00
Max Rotor Diameters (in) 0.00

D45 Front Dual Piston Caliper Calipers

Wilwood’s D45 street and racing calipers provide the ultimate in strength, weight savings, and high efficiency brake clamping for Porsche 911 with "A"or "S" 3.50" OEM front calipers. These calipers feature a high strength, light-weight 5.1 pound forged aluminum body fitted with machined stainless steel pistons. All D45 series calipers utilize the same 3.50" mounting centers, height and offset as the traditional 911 "A" or "S" calipers. The calipers accept Wilwood and FMSI standard D45 brake pads and are compatible with stock replacement rotors and master cylinders. D45 calipers are offered in Type III hard anodize finish and also in Black, Red and Yellow coat finishes. View D45 Calipers

 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright ©2021 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 3.05 June 23, 2023