Brake Kits Found: 15
Number of Pistons
None
4
6
Rotor Diameter
Wheel Diameter*
Caliper Mount

*Minimum diameter is required. Check wheel clearance diagram before purchasing or installing.

AERO6 Big Brake Front Brake Kit
Item No: 140-13903
Pistons: 6
Rotor Diameter: 15.00
Caliper Mount: Radial
Min. Wheel Diameter: 19
Axle Flange: 
Axle Offset: 
From: $2,737.68


AERO6 Big Brake Front Brake Kit Description

AERO6 calipers were designed for the specific purpose of providing big capacity braking with large diameter rotors for heavy weight and extreme duty vehicles. For cars, it’s the biggest of the big providing big brake performance for show and dual purpose street and track vehicles. For trucks and SUV’s, it provides big stopping power for towing, off-road, and enhanced braking with wheel and tire upgrades. Kits listed for specific vehicles are fully compatible with OE master cylinder output and ABS function. Directional staggered vane 14.00” to 15.00”rotors provide maximum cooling for sustained high heat durability.

SX6R Big Brake Dynamic Front Brake Kit
Item No: 140-15311
Pistons: 6
Rotor Diameter: 15.00
Caliper Mount: Radial
Min. Wheel Diameter: 19
Axle Flange: 
Axle Offset: 
From: $4,688.81


SX6R Big Brake Dynamic Front Brake Kit Description

SX6R calipers were designed for the specific purpose of providing high capacity braking with large diameter rotors for extreme duty and race vehicles. It is the largest dual purpose caliper Wilwood has produced, providing big brake performance for show and dual purpose street and track vehicles. Offering additional enhanced braking with wheel and tire upgrades. Kits are fully compatible with OE master cylinder output and ABS function. Directional 72 staggered vane 14.00” to 15.00”rotors provide maximum cooling for sustained high heat durability.

SX6R WCCB Carbon-Ceramic Big Brake Front Brake Kit
Item No: 140-15312
Pistons: 6
Rotor Diameter: 15.00
Caliper Mount: Radial
Min. Wheel Diameter: 19
Axle Flange: 
Axle Offset: 
From: $10,216.44


SX6R WCCB Carbon-Ceramic Big Brake Front Brake Kit Description

SX6R WCCB Carbon-Ceramic Rotor Front Brake Kits offer an extreme performance upgrade featuring WCCB Carbon-Ceramic Dynamic Mount Rotors with Wilwood’s exclusive Bobbin Mounting System. SX6R WCCB kits are engineered to maximize braking capacity inside custom wheels. These brake kits offer a simple bolt-on installation with minor modifications required to the front spindle only and are fully compatible with ABS and OE master cylinder output. SX6R calipers were designed for the specific purpose of providing high capacity braking with large diameter rotors for extreme duty and race vehicles. It is the largest dual purpose caliper Wilwood has produced, providing big brake performance for dual purpose street and track vehicles. 15.00” WCCB rotors are made from a proprietary blend ceramic matrix composite material commonly known as Carbon-Ceramic and dynamically using Wilwood’s proprietary integrated anti-rattle Bobbin Mounting System. WCCB rotors offer higher thermal conductivity and heat capacity in excess of conventional iron or titanium rotors of similar or even greater weight and have been developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking and wear.

AERO6 Big Brake Front Brake Kit
Item No: 140-15705
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18
Axle Flange: 
Axle Offset: 
From: $2,643.18


AERO6 Big Brake Front Brake Kit Description

AERO6 calipers were designed for the specific purpose of providing big capacity braking with large diameter rotors for heavy weight and extreme duty vehicles. For cars, it’s the biggest of the big providing big brake performance for show and dual purpose street and track vehicles. For trucks and SUV’s, it provides big stopping power for towing, off-road, and enhanced braking with wheel and tire upgrades. Kits listed for specific vehicles are fully compatible with OE master cylinder output and ABS function. Directional staggered vane 14.00” to 15.00”rotors provide maximum cooling for sustained high heat durability.

AERO6 Big Brake Front Brake Kit (Race)
Item No: 140-14557
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18
Axle Flange: 
Axle Offset: 
From: $3,185.96


AERO6 Big Brake Front Brake Kit (Race) Description

Aerolite six piston differential bore calipers are coupled with the high heat capacity of dynamically mounted 14.00" Spec37 alloy rotors to provide consistent, responsive braking for spec Corvette racers, autocross, and track day cars using Corvette suspension. GT rotors with 72 staggered directional vanes shed heat and float on lightweight forged aluminum hats via an innovative, dynamic lug-drive mount system to further reduce thermal stresses. This kit comes complete with high temperature, high friction, BP-30 SmartPads selected specifically for exceptional driver control with DOT tires and limited downforce.

The radial-mount Aerolite caliper uses a forged aluminum body with type III Mil-Spec hard anodized finish and a closed bridge to reduce deflection. The race version features a wide body for 20mm pads, providing longer service life on track even with high speed and heavier cars. Investment cast stainless steel pistons resist corrosion and resist heat transfer compared to the aluminum or steel pistons found in OE calipers. Internal springs and high-temperature piston seals reduce piston knockback for a more consistent pedal feel.

Caliper pistons are sized for complete compatibility with the factory master cylinder and ABS controls. For dedicated competition use, manual brake conversions with balance bar pedals are also possible. Mounting brackets with premium-grade hardware secure the calipers in the stock location. Kit requires a stainless steel braided flexline, sold separately, specific to the model year.

AERO6 WCCB Carbon-Ceramic Big Brake Front Brake Kit
Item No: 140-13154
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18
Axle Flange: 
Axle Offset: 
From: $9,040.44


AERO6 WCCB Carbon-Ceramic Big Brake Front Brake Kit Description

AERO6 WCCB Carbon-Ceramic Rotor Front Brake Kits offer an extreme performance upgrade featuring WCCB Carbon-Ceramic Dynamic Mount Rotors with Wilwood’s exclusive Bobbin Mounting System. AERO6 WCCB kits are engineered to maximize braking capacity inside custom wheels. These brake kits offer a simple bolt-on installation with minor modifications required to the front spindle only and are fully compatible with ABS and OE master cylinder output. AERO6 calipers are a competition proven and offer fully detail machined forged caliper body demonstrates superior strength and resistance to deflection and separation under high load. Black or Red powder coat calipers are available as options. 14.00” WCCB rotors are made from a proprietary blend ceramic matrix composite material commonly known as Carbon-Ceramic and dynamically using Wilwood’s proprietary integrated anti-rattle Bobbin Mounting System. WCCB rotors offer higher thermal conductivity and heat capacity in excess of conventional iron or titanium rotors of similar or even greater weight and have been developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking and wear.

SX6R Big Brake Dynamic Front Brake Kit
Item No: 140-15309
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18
Axle Flange: 
Axle Offset: 
From: $4,284.00


SX6R Big Brake Dynamic Front Brake Kit Description

SX6R calipers were designed for the specific purpose of providing high capacity braking with large diameter rotors for extreme duty and race vehicles. It is the largest dual purpose caliper Wilwood has produced, providing big brake performance for show and dual purpose street and track vehicles. Offering additional enhanced braking with wheel and tire upgrades. Kits are fully compatible with OE master cylinder output and ABS function. Directional 72 staggered vane 14.00” to 15.00”rotors provide maximum cooling for sustained high heat durability.

AERO6 Big Brake Lug Drive Front Brake Kit (Race)
Item No: 140-16202
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18
Axle Flange: 
Axle Offset: 
From: $3,628.36


AERO6 Big Brake Lug Drive Front Brake Kit (Race) Description

AERO6R/ST six piston radial mount race calipers are coupled with the high cooling capacity of 14.00" dynamically mounted Spec37 GT directional vane rotors to provide the ultimate brake package for unrestricted road race competition. AERO6R/ST calipers use a forged aluminum body and feature a Type III Mil-Spec, medium gray color hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and extend service life with decreased temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series directional vane rotors are dynamically mounted using our new Lug Drive mounting system to forged aluminum hats. As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Mounting brackets, including all premium grade fasteners, secure the calipers to the uprights in the stock location with no modifications required. This championship proven system is completed with high temperature, high friction, race compound pads selected specifically by application. Installation requires the separate purchase of the stainless steel braided flexline kit that must be ordered according to the model year.

Forged Narrow Superlite 6R Big Brake Front Brake Kit (Hat)
Item No: 140-8922
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18
Axle Flange: 
Axle Offset: 
From: $2,372.70


Forged Narrow Superlite 6R Big Brake Front Brake Kit (Hat) Description

The unsurpassed braking capacity of the Forged Narrow Superlite 6R six-piston caliper serves as the base of this group of 13”-14” big rotor kits for these popular late model vehicles. FNSL6R kits are engineered application specific for simplified installation and full compatibility with OE master cylinder output and ABS functions where used. Big brake kits provide increased brake capacity and complimentary style with wheel, tire, and suspension upgrades on show cars and high performance street/track machines. Optional caliper finishes and rotor designs simplify personalizing the style and braking requirements of any application.

Forged Narrow Superlite 6R Big Brake Front Brake Kit (Hat)
Item No: 140-8921
Pistons: 6
Rotor Diameter: 13.06
Caliper Mount: Radial
Min. Wheel Diameter: 17
Axle Flange: 
Axle Offset: 
From: $2,054.90


Forged Narrow Superlite 6R Big Brake Front Brake Kit (Hat) Description

The unsurpassed braking capacity of the Forged Narrow Superlite 6R six-piston caliper serves as the base of this group of 13”-14” big rotor kits for these popular late model vehicles. FNSL6R kits are engineered application specific for simplified installation and full compatibility with OE master cylinder output and ABS functions where used. Big brake kits provide increased brake capacity and complimentary style with wheel, tire, and suspension upgrades on show cars and high performance street/track machines. Optional caliper finishes and rotor designs simplify personalizing the style and braking requirements of any application.

AERO6 Front Caliper and Bracket Upgrade Kit for Corvette C5-C6
Item No: 140-12629
Pistons: 6
Rotor Diameter: 
Caliper Mount: Radial
Min. Wheel Diameter: 18
Axle Flange: 
Axle Offset: 
From: $1,205.38


AERO6 Front Caliper and Bracket Upgrade Kit for Corvette C5-C6 Description

Aerolite 6R six piston radial mount front caliper kits add big brake stopping power and style to any 1997-2013 C5 or C6 Corvette front suspension. These kits replace the OE calipers on all models and mount in the stock caliper location. All the necessary hardware is included for correct mounting height and offset with the very affordable one-piece 13.38” Z51 style rotors. Aerolite 6R calipers incorporate race proven technology in a high strength forged triple bridge body design. They provide positive and confident pedal response that is matched to the OE master cylinder output and fully compatible with the ABS system. BP-20 dual-sport compound Smart Pads provide clean and quiet driving on the street, with improved friction and high temperature fade resistance for auto-cross and other sport driving applications.

AERO4 Big Brake Lug Drive Front Brake Kit (Race)
Item No: 140-16181
Pistons: 4
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18
Axle Flange: 
Axle Offset: 
From: $3,256.45


AERO4 Big Brake Lug Drive Front Brake Kit (Race) Description

Aerolite four piston calipers are coupled with the high heat capacity of dynamically mounted 14.00" Spec37 alloy rotors to provide consistent, responsive braking for Corvette race cars, autocross, and track day cars using Corvette suspension. GT rotors with 72 staggered directional vanes shed heat and float on lightweight forged aluminum hats via an innovative, dynamic lug-drive mount system to further reduce thermal stresses. This kit comes complete with high temperature, high friction, BP-30 SmartPads selected specifically for exceptional driver control with DOT tires and limited downforce.

The radial-mount Aerolite caliper uses a forged aluminum body with type III Mil-Spec hard anodized finish and a closed bridge to reduce deflection. The race version features a wide body for 20mm pads, providing longer service life on track even with high speed and heavier cars. Aluminum Thermlock pistons with stainless steel shields further protect brake fluid from heat compared to the aluminum or steel pistons found in OE calipers. Internal springs and high-temperature piston seals reduce piston knockback for a more consistent pedal feel.

Caliper pistons are sized for complete compatibility with the factory master cylinder and ABS controls. For dedicated competition use, manual brake conversions with balance bar pedals are also possible. Mounting brackets with premium-grade hardware secure the calipers in the stock location. Kit requires a stainless steel braided flexline, sold separately, specific to the model year.

SLC56 Front Replacement Caliper and Rotor Kit
Item No: 140-15175
Pistons: 4
Rotor Diameter: 12.80
Caliper Mount: Lug
Min. Wheel Diameter: 17
Axle Flange: 
Axle Offset: 
From: $1,090.81


SLC56 Front Replacement Caliper and Rotor Kit Description

SLC56 front caliper, pad, and rotor kits are engineered as high performance street and custom show replacements for Corvettes and hot rods using Corvette suspension. These kits combine the high-tech styling and superior performance of the SLC56 calipers, 12.8” diameter SRP series dimpled and slotted e-coat rotors, and the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. These kits bolt directly to the front spindle of any model C5 or C6 from 1997-2013, without the need for additional brackets or adapters.

SLC56 Front Replacement Caliper Kit
Item No: 140-15173
Pistons: 4
Rotor Diameter: 
Caliper Mount: Lug
Min. Wheel Diameter: 17
Axle Flange: 
Axle Offset: 
From: $800.66


SLC56 Front Replacement Caliper Kit Description

SLC56 front calipers are engineered as a high performance street and custom replacement for Corvettes and hot rods using Corvette suspension. These kits combine the high-tech styling and superior performance of the SLC56 calipers with the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. These kits are a direct bolt-on replacement for the OE calipers on all models of the C5 from 1997 to 2004, and all base model C6’s from 2005 to 2013 using the existing 12.8” diameter OE dimension front rotors. The calipers attach directly to the Corvette spindle without the need for brackets or adapters and accept all types of OE banjo bolt style brake hoses.

Promatrix Front and Rear Replacement Rotor Kit
Item No: 140-9336
Pistons: 0
Rotor Diameter: 12.80
Caliper Mount: 
Min. Wheel Diameter: 17
Axle Flange: 
Axle Offset: 
From: $552.70


Promatrix Front and Rear Replacement Rotor Kit Description

ProMatrix Front and Rear Rotor Kits offer measurable brake performance improvements to racers and enthusiasts using the OE factory brake calipers and High performance pad compounds. One piece rotors are used to provide high temperature durability for the track or high-tech style with corrosion resistance for the street.



*Minimum diameter is required. Check wheel clearance diagram before purchasing or installing.



 

All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
Copyright © 1977 - 2024 Wilwood Engineering, Inc. - All Rights Reserved
Version: 3.04 May 22, 2023
​ ​