Drag Race Rear Brake Kits
Wilwood Disc Brakes offers the largest selection of bolt-on brake kits with specifically engineered and matched
groups of components designed to provide superior brake system performance and custom appeal over a wide range
of applications. Most kits are easily installed with the common hand tools used to perform routine brake service.
Drag Race
(40)
Brake Kits Available
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 7
Axle Offset: 2.36
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-12553-D
|
Call (805) 388-1188
|
|
| Item No |
140-12553-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 8
Axle Offset: 2.50
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-12552-D
|
Call (805) 388-1188
|
|
| Item No |
140-12552-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 10
Axle Offset: 2.81
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
This kit fits the following vehicles:
Mark Williams Spindle
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-12555-D
|
Call (805) 388-1188
|
|
| Item No |
140-12555-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 10
Axle Offset: 2.81
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Note 1. Hats drilled with 5 x 4.75" / 5.00" B.C. pattern for .64" studs.
This kit fits the following vehicles:
Mark Williams Spindle
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-12557-D
|
Call (805) 388-1188
|
|
| Item No |
140-12557-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 14
Axle Offset: 2.81
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-12554-D
|
Call (805) 388-1188
|
|
| Item No |
140-12554-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 14
Axle Offset: 2.81
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Note 1. Hats drilled with 5 x 4.75" / 5.00" B.C. pattern for .64" studs.
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-12556-D
|
Call (805) 388-1188
|
|
| Item No |
140-12556-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 7
Axle Offset: 2.36
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-14135-D
|
Call (805) 388-1188
|
|
| Item No |
140-14135-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 8
Axle Offset: 2.50
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-14130-D
|
Call (805) 388-1188
|
|
| Item No |
140-14130-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 10
Axle Offset: 2.81
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
This kit fits the following vehicles:
Mark Williams Spindle
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-14147-D
|
Call (805) 388-1188
|
|
| Item No |
140-14147-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 10
Axle Offset: 2.81
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Note 1. Hats drilled with 5 x 4.75" / 5.00" B.C. pattern for .64" studs.
This kit fits the following vehicles:
Mark Williams Spindle
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-14149-D
|
Call (805) 388-1188
|
|
| Item No |
140-14149-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 14
Axle Offset: 2.81
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-14140-D
|
Call (805) 388-1188
|
|
| Item No |
140-14140-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 14
Axle Offset: 2.81
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Note 1. Hats drilled with 5 x 4.75" / 5.00" B.C. pattern for .64" studs.
Ordering Information for Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,610.77
|
|
140-14142-D
|
Call (805) 388-1188
|
|
| Item No |
140-14142-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,610.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro Radial Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 12.90
Caliper Mount: Radial
Min. Wheel Diameter: 17
Flange: 0
Axle Offset: 0.00
Pistons: 4
Rotor Diameter: 12.90
Caliper Mount: Radial
Min. Wheel Diameter: 17
Dynapro Radial Rear Drag Brake Kit Description
DynaPro4R Drag Race rear brake kits deliver high torque stopping power with a substantial weight savings over the OE brake components. Dynamic mount steel rotors weigh only 5.7 pounds each. They attach to the OE hubs with lightweight forged aluminum hats using our T-nut mounting system that allows the rotor to move independently of the hat during heat cycles. This eliminates stress at the mount points and the subsequent rotor distortion that can otherwise occur with fixed mount steel plate rotors. Dynamic mount rotors also assure full release from the pads to run true and drag free down the track. Parking brakes are also eliminated for additional weight savings. Clamping force is provided by radial mount DynaPro 4R four piston aluminum calipers weighing in at only 4.1 pounds each. DP4R calipers feature stainless steel pistons, internal bore seals, stainless steel bridge wear plates, and allow easy access to the pads for service without removing the calipers from the mount. BP-20 compound SmartPads provide high response and holding power when cold, and resistance to fade when hot. The complete package mounts to the OE upright and hub with full bolt-on installation. This kit is configured for drag racing only and is not recommended for street use. A minimum size 17” wheels are required along with a stainless steel braided flexline kit available separately.
This kit fits the following vehicles:
Ford Mustang 2015
Ford Mustang 2015-2019
Ford Mustang 2016-2017
Ford Mustang 2019
Ordering Information for Dynapro Radial Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,835.62
|
|
140-14106-D
|
Call (805) 388-1188
|
|
| Item No |
140-14106-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,835.62
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 1
Axle Offset: 2.91
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Note 1. For OE C-Clip axles only. Does not support Special End or C-Clip Eliminator modifications
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-0263-BD
|
Call (805) 388-1188
|
|
| Item No |
140-0263-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 2
Axle Offset: 2.91
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-4545-BD
|
Call (805) 388-1188
|
|
| Item No |
140-4545-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 4
Axle Offset: 2.91
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Note 1. For special end applications. Uses 3.15" fixed bearing.
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-5771-BD
|
Call (805) 388-1188
|
|
| Item No |
140-5771-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 7
Axle Offset: 2.36
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-0261-BD
|
Call (805) 388-1188
|
|
| Item No |
140-0261-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 7
Axle Offset: 2.36
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,053.41
|
|
140-12547-D
|
Call (805) 388-1188
|
|
| Item No |
140-12547-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,053.41
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 7
Axle Offset: 2.50
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-3623-BD
|
Call (805) 388-1188
|
|
| Item No |
140-3623-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 8
Axle Offset: 2.50
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,053.41
|
|
140-12546-D
|
Call (805) 388-1188
|
|
| Item No |
140-12546-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,053.41
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 8
Axle Offset: 2.50
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-2119-BD
|
Call (805) 388-1188
|
|
| Item No |
140-2119-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 10
Axle Offset: 2.81
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
This kit fits the following vehicles:
Mark Williams Spindle
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-0265-BD
|
Call (805) 388-1188
|
|
| Item No |
140-0265-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 10
Axle Offset: 2.81
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
This kit fits the following vehicles:
Mark Williams Spindle
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,053.41
|
|
140-12549-D
|
Call (805) 388-1188
|
|
| Item No |
140-12549-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,053.41
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 10
Axle Offset: 2.81
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Note 1. Hats drilled with 5 x 4.75" / 5.00" B.C. pattern for .64" studs.
This kit fits the following vehicles:
Mark Williams Spindle
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,053.41
|
|
140-12551-D
|
Call (805) 388-1188
|
|
| Item No |
140-12551-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,053.41
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 10
Axle Offset: 2.81
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Note 1. Hats drilled with 5 x 4.75" / 5.00" B.C. pattern for .64" studs.
This kit fits the following vehicles:
Mark Williams Spindle
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$771.48
|
|
140-5348-BD
|
Call (805) 388-1188
|
|
| Item No |
140-5348-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$771.48
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 11
Axle Offset: 2.36
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Note 1. Requires use of Mopar Performance Green Bearing (RP400).
This kit fits the following vehicles:
Chrysler 300 1965
Chrysler 300 1966-1971
Chrysler Cordoba 1975-1983
Chrysler Fifth Avenue 1983-1989
Chrysler Imperial 1974-1975
Chrysler Imperial 1981-1983
Chrysler Lebaron 1977-1981
Chrysler New Yorker 1965
Chrysler New Yorker 1966-1972
Chrysler New Yorker 1972
Chrysler New Yorker 1974-1978
Chrysler New Yorker 1979-1982
Chrysler Newport 1965
Chrysler Newport 1966-1971
Chrysler Newport 1967-1972
Chrysler Newport 1971-1972
Chrysler Newport 1974-1978
Chrysler Newport 1979-1981
Chrysler Town & Country 1965
Chrysler Town & Country 1966-1972
Chrysler Town & Country 1974-1978
Dodge 330 1963-1964
Dodge 440 1963-1964
Dodge A-Body 1961-1972
Dodge A-Body 1965-1972
Dodge A-Body 1973-1976
Dodge Aspen 1976-1980
Dodge B-Body 1962-1964
Dodge B-Body 1965-1969
Dodge B-Body 1966-1968
Dodge B-Body 1969
Dodge B-Body 1970-1972
Dodge B-Body 1973-1979
Dodge Challenger 1970-1972
Dodge Challenger 1973-1974
Dodge Charger 1966-1968
Dodge Charger 1966-1969
Dodge Charger 1969
Dodge Charger 1970-1972
Dodge Charger 1973-1978
Dodge Charger 1975
Dodge Coronet 1965-1969
Dodge Coronet 1966-1968
Dodge Coronet 1969
Dodge Coronet 1970-1972
Dodge Coronet 1973-1976
Dodge Coronet Super Bee 1968
Dodge Coronet Super Bee 1968-1969
Dodge Coronet Super Bee 1969
Dodge Coronet Super Bee 1970
Dodge Custom 1965
Dodge Dart 1963-1972
Dodge Dart 1965-1972
Dodge Dart 1973-1976
Dodge Diplomat 1977-1989
Dodge E-Body 1970-1972
Dodge E-Body 1973-1974
Dodge F-Body 1976-1980
Dodge J-Body 1980-1983
Dodge Lancer 1961-1962
Dodge Magnum 1978-1979
Dodge Mirada 1980-1983
Dodge Monaco 1965
Dodge Monaco 1966-1972
Dodge Monaco 1967-1968
Dodge Monaco 1974
Dodge Monaco 1975-1976
Dodge Monaco 1977
Dodge Monaco 1978
Dodge Polara 1962-1964
Dodge Polara 1965
Dodge Polara 1966-1972
Dodge Polara 1968-1969
Dodge Polara 1970
Dodge Polara 1970-1972
Dodge Polara 1971
Dodge R/T 1976-1978
Dodge St. Regis 1979-1981
Magnum Force 1.50 " Drop Spindle
Magnum Force 2.00 " Drop Spindle
Magnum Force 3.50 " Drop Spindle
Plymouth A-Body 1960-1972
Plymouth A-Body 1965-1972
Plymouth A-Body 1973-1976
Plymouth Barracuda 1964-1969
Plymouth Barracuda 1965-1969
Plymouth Barracuda 1970-1972
Plymouth Barracuda 1973-1974
Plymouth B-Body 1962-1964
Plymouth B-Body 1965-1969
Plymouth B-Body 1966-1968
Plymouth B-Body 1969
Plymouth B-Body 1970-1972
Plymouth B-Body 1973-1979
Plymouth Belvedere 1962-1964
Plymouth Belvedere 1965-1969
Plymouth Belvedere 1966-1968
Plymouth Belvedere 1969
Plymouth Belvedere 1970
Plymouth Caravelle 1982-1984
Plymouth Caravelle 1985
Plymouth Cuda 1970-1972
Plymouth Cuda 1973-1974
Plymouth Duster 1970-1972
Plymouth Duster 1973-1976
Plymouth E-Body 1970-1972
Plymouth E-Body 1973-1974
Plymouth F-Body 1976-1980
Plymouth Fury 1962-1964
Plymouth Fury 1965
Plymouth Fury 1966-1967
Plymouth Fury 1966-1969
Plymouth Fury 1966-1971
Plymouth Fury 1968-1972
Plymouth Fury 1970
Plymouth Fury 1970-1971
Plymouth Fury 1970-1972
Plymouth Fury 1971
Plymouth Fury 1972
Plymouth Fury 1974
Plymouth Fury 1975-1977
Plymouth Fury 1978
Plymouth Fury I 1968-1972
Plymouth Fury II 1965
Plymouth Fury II 1966-1972
Plymouth Fury II 1968-1972
Plymouth Fury III 1965
Plymouth Fury III 1966-1972
Plymouth Fury III 1968-1972
Plymouth Gran Fury 1972
Plymouth Gran Fury 1975-1977
Plymouth GTX 1967-1968
Plymouth GTX 1967-1969
Plymouth GTX 1969
Plymouth GTX 1970-1971
Plymouth GTX 1973-1975
Plymouth J-Body 1980-1983
Plymouth Roadrunner 1968
Plymouth Roadrunner 1968-1969
Plymouth Roadrunner 1969
Plymouth Roadrunner 1970-1972
Plymouth Roadrunner 1973-1980
Plymouth Satellite 1965-1969
Plymouth Satellite 1966-1968
Plymouth Satellite 1969
Plymouth Satellite 1970-1972
Plymouth Satellite 1973-1974
Plymouth Savoy 1962-1964
Plymouth Scamp 1971-1972
Plymouth Scamp 1973-1976
Plymouth Superbird 1970
Plymouth Valiant 1960-1972
Plymouth Valiant 1965-1972
Plymouth Valiant 1973-1976
Plymouth VIP 1967
Plymouth Volare 1976-1980
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-0260-BD
|
Call (805) 388-1188
|
|
| Item No |
140-0260-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 11
Axle Offset: 2.36
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Note 1. Requires use of snap ring style Green Bearing (MO400).
This kit fits the following vehicles:
Chrysler 300 1965
Chrysler 300 1966-1971
Chrysler Cordoba 1975-1983
Chrysler Fifth Avenue 1983-1989
Chrysler Imperial 1974-1975
Chrysler Imperial 1981-1983
Chrysler Lebaron 1977-1981
Chrysler New Yorker 1965
Chrysler New Yorker 1966-1972
Chrysler New Yorker 1972
Chrysler New Yorker 1974-1978
Chrysler New Yorker 1979-1982
Chrysler Newport 1965
Chrysler Newport 1966-1971
Chrysler Newport 1967-1972
Chrysler Newport 1971-1972
Chrysler Newport 1974-1978
Chrysler Newport 1979-1981
Chrysler Town & Country 1965
Chrysler Town & Country 1966-1972
Chrysler Town & Country 1974-1978
Dodge 330 1963-1964
Dodge 440 1963-1964
Dodge A-Body 1961-1972
Dodge A-Body 1965-1972
Dodge A-Body 1973-1976
Dodge Aspen 1976-1980
Dodge B-Body 1962-1964
Dodge B-Body 1965-1969
Dodge B-Body 1966-1968
Dodge B-Body 1969
Dodge B-Body 1970-1972
Dodge B-Body 1973-1979
Dodge Challenger 1970-1972
Dodge Challenger 1973-1974
Dodge Charger 1966-1968
Dodge Charger 1966-1969
Dodge Charger 1969
Dodge Charger 1970-1972
Dodge Charger 1973-1978
Dodge Charger 1975
Dodge Coronet 1965-1969
Dodge Coronet 1966-1968
Dodge Coronet 1969
Dodge Coronet 1970-1972
Dodge Coronet 1973-1976
Dodge Coronet Super Bee 1968
Dodge Coronet Super Bee 1968-1969
Dodge Coronet Super Bee 1969
Dodge Coronet Super Bee 1970
Dodge Custom 1965
Dodge Dart 1963-1972
Dodge Dart 1965-1972
Dodge Dart 1973-1976
Dodge Diplomat 1977-1989
Dodge E-Body 1970-1972
Dodge E-Body 1973-1974
Dodge F-Body 1976-1980
Dodge J-Body 1980-1983
Dodge Lancer 1961-1962
Dodge Magnum 1978-1979
Dodge Mirada 1980-1983
Dodge Monaco 1965
Dodge Monaco 1966-1972
Dodge Monaco 1967-1968
Dodge Monaco 1974
Dodge Monaco 1975-1976
Dodge Monaco 1977
Dodge Monaco 1978
Dodge Polara 1962-1964
Dodge Polara 1965
Dodge Polara 1966-1972
Dodge Polara 1968-1969
Dodge Polara 1970
Dodge Polara 1970-1972
Dodge Polara 1971
Dodge R/T 1976-1978
Dodge St. Regis 1979-1981
Magnum Force 1.50 " Drop Spindle
Magnum Force 2.00 " Drop Spindle
Magnum Force 3.50 " Drop Spindle
Plymouth A-Body 1960-1972
Plymouth A-Body 1965-1972
Plymouth A-Body 1973-1976
Plymouth Barracuda 1964-1969
Plymouth Barracuda 1965-1969
Plymouth Barracuda 1970-1972
Plymouth Barracuda 1973-1974
Plymouth B-Body 1962-1964
Plymouth B-Body 1965-1969
Plymouth B-Body 1966-1968
Plymouth B-Body 1969
Plymouth B-Body 1970-1972
Plymouth B-Body 1973-1979
Plymouth Belvedere 1962-1964
Plymouth Belvedere 1965-1969
Plymouth Belvedere 1966-1968
Plymouth Belvedere 1969
Plymouth Belvedere 1970
Plymouth Caravelle 1982-1984
Plymouth Caravelle 1985
Plymouth Cuda 1970-1972
Plymouth Cuda 1973-1974
Plymouth Duster 1970-1972
Plymouth Duster 1973-1976
Plymouth E-Body 1970-1972
Plymouth E-Body 1973-1974
Plymouth F-Body 1976-1980
Plymouth Fury 1962-1964
Plymouth Fury 1965
Plymouth Fury 1966-1967
Plymouth Fury 1966-1969
Plymouth Fury 1966-1971
Plymouth Fury 1968-1972
Plymouth Fury 1970
Plymouth Fury 1970-1971
Plymouth Fury 1970-1972
Plymouth Fury 1971
Plymouth Fury 1972
Plymouth Fury 1974
Plymouth Fury 1975-1977
Plymouth Fury 1978
Plymouth Fury I 1968-1972
Plymouth Fury II 1965
Plymouth Fury II 1966-1972
Plymouth Fury II 1968-1972
Plymouth Fury III 1965
Plymouth Fury III 1966-1972
Plymouth Fury III 1968-1972
Plymouth Gran Fury 1972
Plymouth Gran Fury 1975-1977
Plymouth GTX 1967-1968
Plymouth GTX 1967-1969
Plymouth GTX 1969
Plymouth GTX 1970-1971
Plymouth GTX 1973-1975
Plymouth J-Body 1980-1983
Plymouth Roadrunner 1968
Plymouth Roadrunner 1968-1969
Plymouth Roadrunner 1969
Plymouth Roadrunner 1970-1972
Plymouth Roadrunner 1973-1980
Plymouth Satellite 1965-1969
Plymouth Satellite 1966-1968
Plymouth Satellite 1969
Plymouth Satellite 1970-1972
Plymouth Satellite 1973-1974
Plymouth Savoy 1962-1964
Plymouth Scamp 1971-1972
Plymouth Scamp 1973-1976
Plymouth Superbird 1970
Plymouth Valiant 1960-1972
Plymouth Valiant 1965-1972
Plymouth Valiant 1973-1976
Plymouth VIP 1967
Plymouth Volare 1976-1980
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-5255-BD
|
Call (805) 388-1188
|
|
| Item No |
140-5255-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 11
Axle Offset: 2.50
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Note 1. Requires use of snap ring style Green Bearing (MO400).
This kit fits the following vehicles:
Chrysler 300 1965
Chrysler 300 1966-1971
Chrysler Cordoba 1975-1983
Chrysler Fifth Avenue 1983-1989
Chrysler Imperial 1974-1975
Chrysler Imperial 1981-1983
Chrysler Lebaron 1977-1981
Chrysler New Yorker 1965
Chrysler New Yorker 1966-1972
Chrysler New Yorker 1972
Chrysler New Yorker 1974-1978
Chrysler New Yorker 1979-1982
Chrysler Newport 1965
Chrysler Newport 1966-1971
Chrysler Newport 1967-1972
Chrysler Newport 1971-1972
Chrysler Newport 1974-1978
Chrysler Newport 1979-1981
Chrysler Town & Country 1965
Chrysler Town & Country 1966-1972
Chrysler Town & Country 1974-1978
Dodge 330 1963-1964
Dodge 440 1963-1964
Dodge A-Body 1961-1972
Dodge A-Body 1965-1972
Dodge A-Body 1973-1976
Dodge Aspen 1976-1980
Dodge B-Body 1962-1964
Dodge B-Body 1965-1969
Dodge B-Body 1966-1968
Dodge B-Body 1969
Dodge B-Body 1970-1972
Dodge B-Body 1973-1979
Dodge Challenger 1970-1972
Dodge Challenger 1973-1974
Dodge Charger 1966-1968
Dodge Charger 1966-1969
Dodge Charger 1969
Dodge Charger 1970-1972
Dodge Charger 1973-1978
Dodge Charger 1975
Dodge Coronet 1965-1969
Dodge Coronet 1966-1968
Dodge Coronet 1969
Dodge Coronet 1970-1972
Dodge Coronet 1973-1976
Dodge Coronet Super Bee 1968
Dodge Coronet Super Bee 1968-1969
Dodge Coronet Super Bee 1969
Dodge Coronet Super Bee 1970
Dodge Custom 1965
Dodge Dart 1963-1972
Dodge Dart 1965-1972
Dodge Dart 1973-1976
Dodge Diplomat 1977-1989
Dodge E-Body 1970-1972
Dodge E-Body 1973-1974
Dodge F-Body 1976-1980
Dodge J-Body 1980-1983
Dodge Lancer 1961-1962
Dodge Magnum 1978-1979
Dodge Mirada 1980-1983
Dodge Monaco 1965
Dodge Monaco 1966-1972
Dodge Monaco 1967-1968
Dodge Monaco 1974
Dodge Monaco 1975-1976
Dodge Monaco 1977
Dodge Monaco 1978
Dodge Polara 1962-1964
Dodge Polara 1965
Dodge Polara 1966-1972
Dodge Polara 1968-1969
Dodge Polara 1970
Dodge Polara 1970-1972
Dodge Polara 1971
Dodge R/T 1976-1978
Dodge St. Regis 1979-1981
Magnum Force 1.50 " Drop Spindle
Magnum Force 2.00 " Drop Spindle
Magnum Force 3.50 " Drop Spindle
Plymouth A-Body 1960-1972
Plymouth A-Body 1965-1972
Plymouth A-Body 1973-1976
Plymouth Barracuda 1964-1969
Plymouth Barracuda 1965-1969
Plymouth Barracuda 1970-1972
Plymouth Barracuda 1973-1974
Plymouth B-Body 1962-1964
Plymouth B-Body 1965-1969
Plymouth B-Body 1966-1968
Plymouth B-Body 1969
Plymouth B-Body 1970-1972
Plymouth B-Body 1973-1979
Plymouth Belvedere 1962-1964
Plymouth Belvedere 1965-1969
Plymouth Belvedere 1966-1968
Plymouth Belvedere 1969
Plymouth Belvedere 1970
Plymouth Caravelle 1982-1984
Plymouth Caravelle 1985
Plymouth Cuda 1970-1972
Plymouth Cuda 1973-1974
Plymouth Duster 1970-1972
Plymouth Duster 1973-1976
Plymouth E-Body 1970-1972
Plymouth E-Body 1973-1974
Plymouth F-Body 1976-1980
Plymouth Fury 1962-1964
Plymouth Fury 1965
Plymouth Fury 1966-1967
Plymouth Fury 1966-1969
Plymouth Fury 1966-1971
Plymouth Fury 1968-1972
Plymouth Fury 1970
Plymouth Fury 1970-1971
Plymouth Fury 1970-1972
Plymouth Fury 1971
Plymouth Fury 1972
Plymouth Fury 1974
Plymouth Fury 1975-1977
Plymouth Fury 1978
Plymouth Fury I 1968-1972
Plymouth Fury II 1965
Plymouth Fury II 1966-1972
Plymouth Fury II 1968-1972
Plymouth Fury III 1965
Plymouth Fury III 1966-1972
Plymouth Fury III 1968-1972
Plymouth Gran Fury 1972
Plymouth Gran Fury 1975-1977
Plymouth GTX 1967-1968
Plymouth GTX 1967-1969
Plymouth GTX 1969
Plymouth GTX 1970-1971
Plymouth GTX 1973-1975
Plymouth J-Body 1980-1983
Plymouth Roadrunner 1968
Plymouth Roadrunner 1968-1969
Plymouth Roadrunner 1969
Plymouth Roadrunner 1970-1972
Plymouth Roadrunner 1973-1980
Plymouth Satellite 1965-1969
Plymouth Satellite 1966-1968
Plymouth Satellite 1969
Plymouth Satellite 1970-1972
Plymouth Satellite 1973-1974
Plymouth Savoy 1962-1964
Plymouth Scamp 1971-1972
Plymouth Scamp 1973-1976
Plymouth Superbird 1970
Plymouth Valiant 1960-1972
Plymouth Valiant 1965-1972
Plymouth Valiant 1973-1976
Plymouth VIP 1967
Plymouth Volare 1976-1980
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-8853-D
|
Call (805) 388-1188
|
|
| Item No |
140-8853-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 14
Axle Offset: 2.81
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,053.41
|
|
140-12548-D
|
Call (805) 388-1188
|
|
| Item No |
140-12548-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,053.41
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 14
Axle Offset: 2.81
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Note 1. Hats drilled with 5 x 4.75" / 5.00" B.C. pattern for .64" studs.
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,053.41
|
|
140-12550-D
|
Call (805) 388-1188
|
|
| Item No |
140-12550-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,053.41
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 14
Axle Offset: 2.91
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-0264-BD
|
Call (805) 388-1188
|
|
| Item No |
140-0264-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 14
Axle Offset: 2.91
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Note 1. Hats drilled with 5 x 4.75" / 5.00" B.C. pattern for .64" studs.
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$771.48
|
|
140-5349-BD
|
Call (805) 388-1188
|
|
| Item No |
140-5349-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$771.48
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 15
Axle Offset: 2.66
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$758.70
|
|
140-0262-BD
|
Call (805) 388-1188
|
|
| Item No |
140-0262-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$758.70
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 33
Axle Offset: 2.50
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Rear Drag Brake Kit Description
FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.
Ordering Information for Forged Dynalite Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$781.77
|
|
140-13716-D
|
Call (805) 388-1188
|
|
| Item No |
140-13716-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$781.77
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 7
Axle Offset: 2.36
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,060.76
|
|
140-14134-D
|
Call (805) 388-1188
|
|
| Item No |
140-14134-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,060.76
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 8
Axle Offset: 2.50
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,060.76
|
|
140-14129-D
|
Call (805) 388-1188
|
|
| Item No |
140-14129-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,060.76
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 10
Axle Offset: 2.81
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
This kit fits the following vehicles:
Mark Williams Spindle
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,060.76
|
|
140-14146-D
|
Call (805) 388-1188
|
|
| Item No |
140-14146-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,060.76
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 10
Axle Offset: 2.81
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Note 1. Hats drilled with 5 x 4.75" / 5.00" B.C. pattern for .64" studs.
This kit fits the following vehicles:
Mark Williams Spindle
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,060.76
|
|
140-14148-D
|
Call (805) 388-1188
|
|
| Item No |
140-14148-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,060.76
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 14
Axle Offset: 2.81
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,060.76
|
|
140-14139-D
|
Call (805) 388-1188
|
|
| Item No |
140-14139-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,060.76
|
| Purchase |
Call (805) 388-1188
|
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Flange: 14
Axle Offset: 2.81
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description
Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.
Note 1. Hats drilled with 5 x 4.75" / 5.00" B.C. pattern for .64" studs.
Ordering Information for Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
|
Info
|
Caliper Color
|
|
Rotor
|
P-Brake Cable
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
|
Drilled
|
|
Multiple Line Kits *
|
$1,060.76
|
|
140-14141-D
|
Call (805) 388-1188
|
|
| Item No |
140-14141-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| P-Brake Cable |
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,060.76
|
| Purchase |
Call (805) 388-1188
|