D154 Front Caliper Kit


D154 Front Caliper Kit
(9) Brake Kits Available

D154 Front Caliper Kit
Pistons: 2
Rotor Diameter: 
Caliper Mount: Floating
Min. Wheel Diameter: 

D154 Front Caliper Kit Description

Wilwood's D154 Front Caliper Kit is a direct bolt-on 1 or 2 piston, lightweight, high-strength, extreme duty alternative to the OE cast iron "Metric" calipers that were used on a wide range of factory disc brake equipped mid size GM cars and small trucks beginning in 1978. Use of this caliper can still be found on some GM models as late as the year 2002. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D154 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D154 calipers mount in the stock location over stock rotors; use the original style OE D154 brake pads and an OE M10-1.5 banjo bolt brake line mounting. D154 Calipers can be used with most wheels that clear the OE calipers. The front calipers with 2.50” piston provide 4.90 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder. The D154 is also available in a two piston version with 1.62 pistons, offering 4.12 square inches of area. Kits contain Wilwood’s hardened slide pins and BP-10 high friction pads. Matching rear calipers are also available for custom installations. Custom stainless steel brake lines are also available.



Ordering Information for D154 Front Caliper Kit
Item No 140-12099-BK
Info Details
Caliper Color Black Powder Coat
Rotor N/A
Line Kit Multiple Line Kits *
Price $404.99
Purchase
Call (805) 388-1188
Item No 140-12099-R
Info Details
Caliper Color Red Powder Coat
Rotor N/A
Line Kit Multiple Line Kits *
Price $404.99
Purchase
Call (805) 388-1188

D154 Front Caliper Kit
Pistons: 2
Rotor Diameter: 
Caliper Mount: Floating
Min. Wheel Diameter: 

D154 Front Caliper Kit Description

Wilwood's D154 Front Caliper Kit is a direct bolt-on 1 or 2 piston, lightweight, high-strength, extreme duty alternative to the OE cast iron "Metric" calipers that were used on a wide range of factory disc brake equipped mid size GM cars and small trucks beginning in 1978. Use of this caliper can still be found on some GM models as late as the year 2002. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D154 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D154 calipers mount in the stock location over stock rotors; use the original style OE D154 brake pads and an OE M10-1.5 banjo bolt brake line mounting. D154 Calipers can be used with most wheels that clear the OE calipers. The front calipers with 2.50” piston provide 4.90 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder. The D154 is also available in a two piston version with 1.62 pistons, offering 4.12 square inches of area. Kits contain Wilwood’s hardened slide pins and BP-10 high friction pads. Matching rear calipers are also available for custom installations. Custom stainless steel brake lines are also available.



Ordering Information for D154 Front Caliper Kit
Item No 140-12100-BK
Info Details
Caliper Color Black Powder Coat
Rotor N/A
Line Kit Multiple Line Kits *
Price $404.99
Purchase
Call (805) 388-1188
Item No 140-12100-R
Info Details
Caliper Color Red Powder Coat
Rotor N/A
Line Kit Multiple Line Kits *
Price $404.99
Purchase
Call (805) 388-1188

D154 Front Caliper Kit
Pistons: 1
Rotor Diameter: 
Caliper Mount: Floating
Min. Wheel Diameter: 

D154 Front Caliper Kit Description

Wilwood's D154 Front Caliper Kit is a direct bolt-on 1 or 2 piston, lightweight, high-strength, extreme duty alternative to the OE cast iron "Metric" calipers that were used on a wide range of factory disc brake equipped mid size GM cars and small trucks beginning in 1978. Use of this caliper can still be found on some GM models as late as the year 2002. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D154 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D154 calipers mount in the stock location over stock rotors; use the original style OE D154 brake pads and an OE M10-1.5 banjo bolt brake line mounting. D154 Calipers can be used with most wheels that clear the OE calipers. The front calipers with 2.50” piston provide 4.90 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder. The D154 is also available in a two piston version with 1.62 pistons, offering 4.12 square inches of area. Kits contain Wilwood’s hardened slide pins and BP-10 high friction pads. Matching rear calipers are also available for custom installations. Custom stainless steel brake lines are also available.

This kit fits the following vehicles:
Buick Century 1978 Buick Century 1979-1981 Buick Regal 1978 Buick Regal 1979-1987 Buick Regal Grand National 1982-1987 Buick Riviera 1979-1985 Cadillac Eldorado 1979-1985 Cadillac Seville 1980-1985 Chevrolet Camaro 1982-1987 Chevrolet Camaro 1988-1992 Chevrolet El Camino 1978 Chevrolet El Camino 1979-1987 Chevrolet Malibu 1978 Chevrolet Malibu 1979-1987 Chevrolet Monte Carlo 1978 Chevrolet Monte Carlo 1979-1988 Chevrolet S10 Blazer 1983-1996 Chevrolet S10 Blazer 1983-1997 Chevrolet S10 Blazer 1997 Chevrolet S10 Pickup 1982 Chevrolet S10 Pickup 1983-1996 Chevrolet S10 Pickup 1997 Chevrolet S10 Pickup 1997-2002 GMC Caballero 1978 GMC Caballero 1979-1987 GMC Jimmy 1992-1996 GMC Jimmy 1992-1997 GMC Jimmy 1997 GMC S15 1982 GMC S15 1983-1990 GMC S15 Jimmy 1983-1991 GMC Sonoma 1991-1996 GMC Sonoma 1997 GMC Sonoma 1997-2002 GMC Syclone 1991 GMC Typhoon 1992-1993 Isuzu Hombre 1996-2000 Oldsmobile Bravada 1991-1996 Oldsmobile Cutlass 1978 Oldsmobile Cutlass 1979-1981 Oldsmobile Cutlass 1985-1987 Oldsmobile Cutlass Calais 1979-1984 Oldsmobile Cutlass Calais 1983-1984 Oldsmobile Cutlass Cruiser 1980-1983 Oldsmobile Cutlass Salon 1979 Oldsmobile Cutlass Salon 1979-1980 Oldsmobile Cutlass Salon 1979-1986 Oldsmobile Cutlass Salon 1979-1987 Oldsmobile Cutlass Supreme 1977 Oldsmobile Cutlass Supreme 1978 Oldsmobile Cutlass Supreme 1979-1981 Oldsmobile Cutlass Supreme 1979-1987 Oldsmobile Cutlass Supreme 1981 Oldsmobile Cutlass Supreme 1988 Oldsmobile Toronado 1979-1985 Oldsmobile Vista Cruiser 1978 Pontiac Bonneville 1982-1987 Pontiac Firebird 1982-1987 Pontiac Firebird 1988-1992 Pontiac Grand Am 1978 Pontiac Grand Am 1979-1980 Pontiac Grand Prix 1978 Pontiac Grand Prix 1979-1987 Pontiac LeMans 1978 Pontiac LeMans 1979-1980 Pontiac LeMans 1981-1983
Ordering Information for D154 Front Caliper Kit
Item No 140-12097-BK
Info Details
Caliper Color Black Powder Coat
Rotor N/A
Line Kit Multiple Line Kits *
Price $404.99
Purchase
Call (805) 388-1188
Item No 140-12097-P
Info Details
Caliper Color Polish
Rotor N/A
Line Kit Multiple Line Kits *
Price $518.99
Purchase
Call (805) 388-1188
Item No 140-12097-R
Info Details
Caliper Color Red Powder Coat
Rotor N/A
Line Kit Multiple Line Kits *
Price $404.99
Purchase
Call (805) 388-1188

D154 Front Caliper Kit
Pistons: 1
Rotor Diameter: 
Caliper Mount: Floating
Min. Wheel Diameter: 

D154 Front Caliper Kit Description

Wilwood's D154 Front Caliper Kit is a direct bolt-on 1 or 2 piston, lightweight, high-strength, extreme duty alternative to the OE cast iron "Metric" calipers that were used on a wide range of factory disc brake equipped mid size GM cars and small trucks beginning in 1978. Use of this caliper can still be found on some GM models as late as the year 2002. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D154 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D154 calipers mount in the stock location over stock rotors; use the original style OE D154 brake pads and an OE M10-1.5 banjo bolt brake line mounting. D154 Calipers can be used with most wheels that clear the OE calipers. The front calipers with 2.50” piston provide 4.90 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder. The D154 is also available in a two piston version with 1.62 pistons, offering 4.12 square inches of area. Kits contain Wilwood’s hardened slide pins and BP-10 high friction pads. Matching rear calipers are also available for custom installations. Custom stainless steel brake lines are also available.



Ordering Information for D154 Front Caliper Kit
Item No 140-12098-BK
Info Details
Caliper Color Black Powder Coat
Rotor N/A
Line Kit Multiple Line Kits *
Price $404.99
Purchase
Call (805) 388-1188
Item No 140-12098-R
Info Details
Caliper Color Red Powder Coat
Rotor N/A
Line Kit Multiple Line Kits *
Price $404.99
Purchase
Call (805) 388-1188





Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved