M/C Fitting

Wilwood’s fittings are manufactured to high quality standards. This fitting kit been designed for use with our Compact Remote Master Cylinders with 11/16-20 inlet thread and will adapt to -3 AN male fitting used most AN stainless brake lines assemblies. Also Includes the required o-ring seal (part # 210-12020)

M/C Fitting

Wilwood’s fittings are manufactured to high quality standards. This fitting kit been designed for use with our Compact Remote Master Cylinders with 11/16-20 inlet thread and will adapt to -3 AN male fitting used most AN stainless brake lines assemblies. Also Includes the required o-ring seal (part # 210-12020)

Bracket Kit, Caliper Mounting (Racing)

Wilwood’s Aero4 / Aero6 bracket mounts the Aero series of radial mount calipers to a 6.00” center to center lug mount. Brackets include studs, shim and the mounting hardware.

Bracket Kit, Caliper Mounting (Racing)

Wilwood’s Aero4 / Aero6 bracket mounts the Aero series of radial mount calipers to a 6.00” center to center lug mount. Brackets include studs, shim and the mounting hardware.

Bolt Kit-Rotor

Wilwood’s Rotor Bolt kits contain bolts and hardware for mounting rotors specific hat or adapters.

Bolt Kit-Rotor

Wilwood’s Rotor Bolt kits contain bolts and hardware for mounting rotors specific hat or adapters.

Piston Spring

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # 300-2434 (1.22” diameter) is used with Wilwood’s conventional stainless steel pistons from 1.62” to 1.88” diameter. Spring use in stainless pistons require an updated relief cut not present in earlier versions of pistons. Please check your application before ordering.

Piston Spring

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # 300-2434 (1.22” diameter) is used with Wilwood’s conventional stainless steel pistons from 1.62” to 1.88” diameter. Spring use in stainless pistons require an updated relief cut not present in earlier versions of pistons. Please check your application before ordering.

Piston Spring

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # 300-12995 (.72” diameter) is used with all Wilwood Thermlock pistons and Wilwood’s conventional stainless steel pistons from 1.00” to 1.38” diameter. Spring use in stainless pistons require a relief cut not present in earlier versions of pistons. Please check your application before ordering.

Piston Spring

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # 300-12995 (.72” diameter) is used with all Wilwood Thermlock pistons and Wilwood’s conventional stainless steel pistons from 1.00” to 1.38” diameter. Spring use in stainless pistons require a relief cut not present in earlier versions of pistons. Please check your application before ordering.

Caliper Pistons - Thermlock

Wilwood’s exclusive Thermlock Pistons provide the most effective thermal barrier available for minimizing heat transfer from the brake pads to the caliper body, seals and fluid. This innovative multi-part design incorporates a stainless steel shield and coated aluminum shell configuration that effectively retards heat transfer by at least 25 percent. This reduction in operating temperature eliminates seal crystallization and localized fluid boiling, which decreases distortion in the caliper body and piston bores, extending overall service life.

Caliper Pistons - Thermlock

Wilwood’s exclusive Thermlock Pistons provide the most effective thermal barrier available for minimizing heat transfer from the brake pads to the caliper body, seals and fluid. This innovative multi-part design incorporates a stainless steel shield and coated aluminum shell configuration that effectively retards heat transfer by at least 25 percent. This reduction in operating temperature eliminates seal crystallization and localized fluid boiling, which decreases distortion in the caliper body and piston bores, extending overall service life.

Caliper Pistons - Thermlock

Wilwood’s exclusive Thermlock Pistons provide the most effective thermal barrier available for minimizing heat transfer from the brake pads to the caliper body, seals and fluid. This innovative multi-part design incorporates a stainless steel shield and coated aluminum shell configuration that effectively retards heat transfer by at least 25 percent. This reduction in operating temperature eliminates seal crystallization and localized fluid boiling, which decreases distortion in the caliper body and piston bores, extending overall service life.

Caliper Pistons - Thermlock

Wilwood’s exclusive Thermlock Pistons provide the most effective thermal barrier available for minimizing heat transfer from the brake pads to the caliper body, seals and fluid. This innovative multi-part design incorporates a stainless steel shield and coated aluminum shell configuration that effectively retards heat transfer by at least 25 percent. This reduction in operating temperature eliminates seal crystallization and localized fluid boiling, which decreases distortion in the caliper body and piston bores, extending overall service life.