Search: clutch


Web Pages found: 1
Hardware Components
Product Groups found: 41
Clutch Pedal Kits

Clutch Pedal Kits

Wilwood’s Clutch Pedal Kit comes with a floor mount forged adjustable clutch pedal of a 6 to 1 ratio, Integral Reservoir Master cylinder in a ¾ bore and universal pull type slave cylinder in a convenient kit.

Ordering Information for Clutch Pedal Kits
Details
PEDAL KIT,CLUTCH,7:1,3/4in.,M/C SLAVE SWING (OBSOLETE)
$231.70
340-1470
Call (805) 388-1188
Details
PEDAL KIT,FORGED,CLUTCH,6:1,3/4in.,M/C SLAVE CYLINDER,FLOOR MOUNT
$263.34
341-15169
Call (805) 388-1188
Details
PEDAL KIT,FORGED,CLUTCH,7:1,3/4in.,M/C SLAVE CYLINDER,SWING MOUNT
$263.34
341-15170
Call (805) 388-1188
Details
PEDAL KIT,CLUTCH,6:1,3/4in.,M/C SLAVE (OBSOLETE)
$231.70
340-1469
Call (805) 388-1188

Clutch Pedal Kits

Clutch Pedal Kits

Wilwood’s Clutch Pedal Kit comes with a swing mount forged adjustable clutch pedal of a 7 to 1 ratio, Integral Reservoir Master cylinder in a ¾ bore and universal pull type slave cylinder in a convenient kit.

Ordering Information for Clutch Pedal Kits
Details
PEDAL KIT,CLUTCH,7:1,3/4in.,M/C SLAVE SWING (OBSOLETE)
$231.70
340-1470
Call (805) 388-1188
Details
PEDAL KIT,FORGED,CLUTCH,6:1,3/4in.,M/C SLAVE CYLINDER,FLOOR MOUNT
$263.34
341-15169
Call (805) 388-1188
Details
PEDAL KIT,FORGED,CLUTCH,7:1,3/4in.,M/C SLAVE CYLINDER,SWING MOUNT
$263.34
341-15170
Call (805) 388-1188
Details
PEDAL KIT,CLUTCH,6:1,3/4in.,M/C SLAVE (OBSOLETE)
$231.70
340-1469
Call (805) 388-1188

Brake / Clutch and Throttle Pedal

Brake / Clutch and Throttle Pedal

Wilwood’s new floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12410 is for rear engine cars and does not include a throttle bell crank and linkage. This unit features an aluminum frame with strong lightweight fabricated steel pedal arms. The frame and the pedal arms have a black e-coat finish for protection and an attractive appearance. Also included with the pedal assembly are mounting studs, clevises, and balance bar assembly that is designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The pedal assembly provides a 5.25 to 1 nominal ratio.

Ordering Information for Brake / Clutch and Throttle Pedal
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS
$413.91
340-12410
Call (805) 388-1188
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE
$523.41
340-12411
Call (805) 388-1188

Brake / Clutch and Throttle Pedal

Brake / Clutch and Throttle Pedal

Wilwood’s new floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12411 is for front engine cars and includes a throttle bell crank and linkage assembly. This unit features an aluminum frame with strong lightweight fabricated steel pedal arms. The frame and the pedal arms have a black e-coat finish for protection and an attractive appearance. Also included with the pedal assembly are mounting studs, clevises, and balance bar assembly that is designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The pedal assembly provides a 5.25 to 1 nominal ratio.

Ordering Information for Brake / Clutch and Throttle Pedal
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS
$413.91
340-12410
Call (805) 388-1188
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE
$523.41
340-12411
Call (805) 388-1188

Brake / Clutch and Throttle Pedal-Adj Ratio

Brake / Clutch and Throttle Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly for rear engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The throttle pedal includes a pull rod for rear engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Brake / Clutch and Throttle Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJUSTABLE RATIO
$480.42
340-16602
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJUSTABLE RATIO
$613.72
340-16603
Call (805) 388-1188

Brake / Clutch and Throttle Pedal-Adj Ratio

Brake / Clutch and Throttle Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly with throttle linkage for front engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The throttle pedal includes an adjustable ratio bell crank for front engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Brake / Clutch and Throttle Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJUSTABLE RATIO
$480.42
340-16602
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJUSTABLE RATIO
$613.72
340-16603
Call (805) 388-1188

Floor Mount Brake and Clutch Pedal-Adj Ratio

Floor Mount Brake and Clutch Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a floor mount brake and clutch pedal assembly. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH ADJUSTABLE RATIO
$371.92
340-16606
Call (805) 388-1188

Floor Mount Clutch / Brake Pedal

Floor Mount Clutch / Brake Pedal

This floor mount pedal assembly mounts a single brake or clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. This pedal accepts any Wilwood vertical mount flange single or tandem outlet master cylinder. Horizontal mount flange master cylinders require an adapter kit. Master cylinders are ordered separately by style and bore size

Ordering Information for Floor Mount Clutch / Brake Pedal
Details
PEDAL ASSEMBLY,6:1,SINGLE CLUTCH/BRAKE ALUMINUM BASE (OBSOLETE)
$79.29
340-1289
Call (805) 388-1188
Details
PEDAL ASSEMBLY,6:1,SINGLE CLUTCH/BRAKE ALUMINUM BASE,FORGED PEDAL
$110.55
340-13833
Call (805) 388-1188

Floor Mount Clutch / Brake Pedal-Adjustable Ratio

Floor Mount Clutch / Brake Pedal-Adjustable Ratio

Adjustable ratio single clutch pedal, in a floor mount assembly. Pedal head adjusts vertically to provide a 5.25, 5.63, or 6.00:1 ratio for more feel or less pedal effort. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arm. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Clutch / Brake Pedal-Adjustable Ratio
*New* Details
PEDAL ASSEMBLY,SINGLE M/C,CLUTCH/BRAKE FLOOR MT,ADJ RATIO,5.25-6:1
$147.17
340-16378
Call (805) 388-1188

Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt

Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt

Adjustable ratio Tru-Bar brake pedal, in a floor mount brake and clutch pedal assembly. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH ADJUSTABLE RATIO,TRUNNION
$905.12
340-16607
Call (805) 388-1188

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Adjustable ratio Tru-Bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly for rear engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The throttle pedal includes a pull rod for rear engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms.The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$697.42
340-16604
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$836.92
340-16605
Call (805) 388-1188

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Adjustable ratio Tru-Bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly with throttle linkage for front engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The throttle pedal includes an adjustable ratio bell crank for front engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$697.42
340-16604
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$836.92
340-16605
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal

Reverse Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged pedal arms. The brake pedal uses a 6.25:1 ratio arm, but with a shorter 5.1:1 ratio arm on the clutch pedal for additional clearance when necessary. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size. .

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REAR MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11299
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 ADJUSTABLE,DUAL M/C
$204.37
340-12509
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1 TRIPLE M/C,FORGED PEDAL
$281.85
340-13835
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5:1 CLUTCH,FORGED PEDAL
$281.85
340-13836
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C,FORGED PEDAL
$204.37
340-13837
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal

Reverse Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 5.1:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REAR MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11299
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 ADJUSTABLE,DUAL M/C
$204.37
340-12509
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1 TRIPLE M/C,FORGED PEDAL
$281.85
340-13835
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5:1 CLUTCH,FORGED PEDAL
$281.85
340-13836
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C,FORGED PEDAL
$204.37
340-13837
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal

Reverse Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 6.25:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REAR MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11299
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 ADJUSTABLE,DUAL M/C
$204.37
340-12509
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1 TRIPLE M/C,FORGED PEDAL
$281.85
340-13835
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5:1 CLUTCH,FORGED PEDAL
$281.85
340-13836
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C,FORGED PEDAL
$204.37
340-13837
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal

Reverse Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly mounts two single outlet brake master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 5.1:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REAR MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11299
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 ADJUSTABLE,DUAL M/C
$204.37
340-12509
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1 TRIPLE M/C,FORGED PEDAL
$281.85
340-13835
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5:1 CLUTCH,FORGED PEDAL
$281.85
340-13836
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C,FORGED PEDAL
$204.37
340-13837
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal

Reverse Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly mounts two single outlet brake master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6.25:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REAR MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11299
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 ADJUSTABLE,DUAL M/C
$204.37
340-12509
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1 TRIPLE M/C,FORGED PEDAL
$281.85
340-13835
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5:1 CLUTCH,FORGED PEDAL
$281.85
340-13836
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C,FORGED PEDAL
$204.37
340-13837
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal-Adj Rt

Reverse Swing Mount Brake and Clutch Pedal-Adj Rt

Adjustable ratio balance bar brake pedal and clutch pedal combo, in a reverse swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,BRAKE/CLUTCH REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$339.76
340-16385
Call (805) 388-1188

Reverse Swing Mount Clutch / Brake Pedal

Reverse Swing Mount Clutch / Brake Pedal

This swinging mount pedal assembly mounts a single brake or clutch master cylinder in a reverse position inside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6;1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. This pedal accepts any Wilwood vertical mount flange single or tandem outlet master cylinder. Horizontal mount flange master cylinders require an adapter kit. Master cylinders are ordered separately by style and bore size.

Ordering Information for Reverse Swing Mount Clutch / Brake Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,6:1,CLUTCH ADJUSTABLE
$115.02
340-13574
Call (805) 388-1188

Rev Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj

Rev Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj

Adjustable ratio balance bar brake pedal and clutch pedal combo, in a reverse swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Rev Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,BRAKE/CLUTCH REVERSE MT,ADJ RATIO,5.5-6.25:1,TRUNNION
$598.06
340-16386
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 5:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,TRIPLE M/C TRUNNION
$498.94
340-15073
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C,TRUNNION
$498.94
340-15074
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,BRAKE TRIPLE M/C,5:1 CLUTCH,TRUNNION
$498.94
340-15075
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio and 5;1 clutch. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,TRIPLE M/C TRUNNION
$498.94
340-15073
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C,TRUNNION
$498.94
340-15074
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,BRAKE TRIPLE M/C,5:1 CLUTCH,TRUNNION
$498.94
340-15075
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,TRIPLE M/C TRUNNION
$498.94
340-15073
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C,TRUNNION
$498.94
340-15074
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,BRAKE TRIPLE M/C,5:1 CLUTCH,TRUNNION
$498.94
340-15075
Call (805) 388-1188

Swing Mnt Tandem Brake and Offset Clutch Pedal

Swing Mnt Tandem Brake and Offset Clutch Pedal

Adjustable ratio brake pedal with offset clutch pedal, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and tandem brake master cylinder mount to the assembly through the firewall. The non-skid waffled pedal pads can be laterally adjusted to be from 5 to 7 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. The clutch pedal accepts a 2.25 inch vertical mount flange single outlet master cylinder, while the brake uses a 3.25 inch horizontal mount flange tandem master cylinder, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mnt Tandem Brake and Offset Clutch Pedal
*New* Details
PEDAL ASSY,TANDEM W/SINGLE M/C,FWD MT BRAKE W/2.00 OFF CLUTCH,ADJ 5.50-6.25:1
$294.42
340-16833
Call (805) 388-1188

Swing Mount Brake and Clutch Pedal

Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a forward position outside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 6.25:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

Ordering Information for Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,FORWARD MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11295
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5.1:1,TRIPLE M/C (OBSOLETE)
$224.50
340-4828
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C (OBSOLETE)
$224.50
340-3342
Call (805) 388-1188
Details
PEDAL ASSEMBLY,FORWARD MT,6.25:1,TRIPLE M/C (OBSOLETE)
$224.50
340-3950
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5.0:1 CLUTCH (OBSOLETE)
$224.50
340-6451
Call (805) 388-1188
Details
PEDAL ASSEMBLFORWARD MT,STEEL,PEDALS,6:1 TRIPLE M/C (OBO)
$312.37
340-6916
Call (805) 388-1188

Swing Mount Brake and Clutch Pedal-Adj Ratio

Swing Mount Brake and Clutch Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal and clutch pedal combo, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly through the firewall, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FORWARD MT,HD,2.00 OFFSET CLUTCH,ADJ RATIO,5.50-6.25:1,TRIPLE M/C
$339.76
340-16350
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,FORWARD MT BRAKE/CLUTCH,ADJUSTABLE RATIO,5.5-6.25:1
$339.76
340-16382
Call (805) 388-1188

Swing Mount Brake and Clutch Pedal-Adj Ratio

Swing Mount Brake and Clutch Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal with offset clutch pedal, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly through the firewall, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 5 to 7 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FORWARD MT,HD,2.00 OFFSET CLUTCH,ADJ RATIO,5.50-6.25:1,TRIPLE M/C
$339.76
340-16350
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,FORWARD MT BRAKE/CLUTCH,ADJUSTABLE RATIO,5.5-6.25:1
$339.76
340-16382
Call (805) 388-1188

Swing Mount Clutch / Brake Pedal

Swing Mount Clutch / Brake Pedal

This swinging mount pedal assembly mounts a single brake or clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 7:1 ratio pedal Arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. This pedal accepts any Wilwood vertical mount flange single or tandem outlet master cylinder. Horizontal mount flange master cylinders require an adapter kit. Master cylinders are ordered separately by style and bore size.

Ordering Information for Swing Mount Clutch / Brake Pedal
Details
PEDAL ASSEMBLY,7:1,SINGLE,M/C,ALUMINUM BASE (OBSOLETE)
$79.29
340-1290
Call (805) 388-1188
Details
PEDAL ASSEMBLY,7:1,SINGLE,M/C,ALUMINUM BASE,FORGED PEDAL
$110.55
340-13834
Call (805) 388-1188

Swing Mount Clutch / Brake Pedal-Adjustable Ratio

Swing Mount Clutch / Brake Pedal-Adjustable Ratio

Adjustable ratio single clutch pedal, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 6.25, 6.63, or 7.00:1 ratio for more feel or less pedal effort. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Clutch / Brake Pedal-Adjustable Ratio
*New* Details
PEDAL ASSEMBLY,SINGLE M/C,CLUTCH/BRAKE FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$147.17
340-16381
Call (805) 388-1188

Swing Mount Tandem Brake and Clutch Pedal

Swing Mount Tandem Brake and Clutch Pedal

Wilwood's new Swing Mount Tandem Brake and Clutch Assembly simplifies installing a tandem outlet, single pushrod brake master cylinder in conjunction with a hydraulic clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged pedal arms in either 6.25:1 or 7.00:1 ratios. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. Will fit most tandem cylinders available with 3.25 horizontal bolt spacing. Pedal base has additional mount points for vertical mount 2.50” spacing tandem master cylinders using 5/16-18 studs (not supplied with pedal assembly). Clutch master cylinder mount is also a 2.25” vertical mount and will use most popular single outlet cylinders.

Ordering Information for Swing Mount Tandem Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,FORWARD MT,6.25:1,TANDEM MASTER/CLUTCH
$242.47
340-14360
Call (805) 388-1188
Details
PEDAL ASSEMBLY,FORWARD MT,7:1,TANDEM MASTER/CLUTCH
$242.47
340-14361
Call (805) 388-1188

Swing Mount Tandem Brake and Clutch Pedal-Adj Rt

Swing Mount Tandem Brake and Clutch Pedal-Adj Rt

Adjustable ratio brake pedal and clutch pedal combo, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 6.25, 6.63, or 7.00:1 ratio for more feel or less pedal effort. A clutch master cylinder and tandem brake master cylinder mount to the assembly through the firewall. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference.The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts a 2.25 inch vertical mount flange single outlet master cylinder for the clutch, and a Wilwood 3.25 inch horizontal flange tandem master cylinder for the brakes, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Tandem Brake and Clutch Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,TANDEM W/SINGLE M/C,FWD MT,BRAKE/CLUTCH,ADJ RATIO,6.25-7:1
$294.42
340-16384
Call (805) 388-1188

Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj Ratio

Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj Ratio

Adjustable ratio Tru-Bar balance bar brake pedal and clutch pedal combo, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly through the firewall, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,FWD MT,BRAKE/ CLUTCH,ADJ RATIO,5.5-6.25:1,TRUNNION
$598.06
340-16383
Call (805) 388-1188

Swing Mount Tru-Bar Brake and Clutch Pedal

Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Forward Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,FORWARD MT,6.25:1,TRIPLE M/C,TRUNNION
$498.94
340-15072
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood’s new Adjustable Forward Mount 2.00" Offset Clutch Pedal Replacement Kit includes the Adjustable Clutch pedal assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads and pedal head are of special adjustable design that allows fine-tuning of the pedal location and clearance. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio. Also Included with this assembly is clevis hardware required in the conversion. 340-16352 kits will convert the following 6.25 to 1 ratio forward mount assemblies: 340-11295 and 340-3950.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood’s new Adjustable Forward Mount Pedal Replacement Kit includes the brake and clutch pedals together, with the appropriate hardware to retrofit earlier design cast pedal assemblies. Pedals feature an all aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. Included with this assembly: Clevis and clevis pins required in the conversion. 340-12043 kits will convert the following forward mount assemblies 340-3950, 340-6916

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood’s new Adjustable Reverse Mount Pedal Replacement Kit includes the brake and clutch pedals together, with the appropriate hardware to retrofit earlier design cast pedal assemblies. Pedals feature an all aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. 340-12044 pedal kit will convert the reverse pedal assembliy 340-3342.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Replacement Brake or Clutch pedal pad kit for Wilwood’s new style forged pedal levers. Engineered from high strength stainless steel with a non-slip waffle finish. includes 4 quantity 10-24 x .50 hex lobe bolts to install.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Tandem Master Cylinder Bracket Adapter kit contains bracket, bolts, clevises and pushrod assembly to adapt Wilwood’s Chrysler Style or Tandem master cylinders to a single clutch assembly.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood's Brake Pedal Cover is a slip on retrofit to our current adjustable pedal pad. Its rubber construction gives you a high traction, non-slip surface for your braking and clutch needs.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood's Brake Pedal Cover kit with Trim plate provides you with a slip on retrofit to our current adjustable pedal pad. It’s rubber construction gives you a high traction, non-slip surface complemented by a stainless steel trim ring provides you with a non-rusting, high luster finish for your braking and clutch needs.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood's Brake Pedal Cover Trim plate is a slip on retrofit to our current adjustable pedal pad. Its stainless steel construction gives you a non-rusting, high luster finish for your braking and clutch needs.

NOTE: Trim plate only works on top of Wilwood's rubber brake pedal cover.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188



PDFs found: 23

Wilwood Disc Brakes Wins Best New Products Award at SEMA 2017

Wilwood’s new Tandem Brake and Hydraulic Clutch Pedal Kit received a Best New Products Award in the Street Rod/Custom Car Product category at the 2017 SEMA trade show in Las Vegas.

Wilwood Disc Brakes Introduces new Master Cylinder Firewall Mounting Kit

Wilwood Disc Brakes is proud to introduce a new billet aluminum Master Cylinder Firewall Mounting Kit, part number 250-13167. This mounting kit is specifically designed to work in conjunction with Wilwood’s Forward Mount Brake and Clutch Pedal Assembly and Flange Mounted Compact Remote Master Cylinders.

Wilwood Disc Brakes Releases Billet Brackets for Aluminum Remote Master Cylinder Reservoirs

Wilwood’s aluminum master cylinder reservoirs are a staple of the racing and hot rod communities, and these newly available billet mounting brackets make them easier to use. Available in single, double, or triple reservoir styles, the brackets are made of lightweight billet aluminum and drilled to reduce weight further. The aluminum reservoirs hold 4 oz. of fluid, plumbed to remote brake or clutch master cylinders.

Wilwood’s New Swing Mount Pedal and Triple Master Cylinder Assemblies

If you are building a racecar, street rod or Pro Touring vehicle you should be aware of Wilwood’s new Adjustable Reverse Mount Pedal assembly or the new Forward Mount Pedal Assembly that combines the brake and clutch pedals together in one unit.

Wilwood’s New Swing Mount Pedal and Triple Master Cylinder Assemblies

If you are building a racecar, street rod or Pro-Touring vehicle you should be aware of Wilwood’s new Adjustable Reverse Mount Pedal assembly or the new Forward Mount Pedal Assembly that combines the brake and clutch pedals together in one unit.

Wilwood Disc Brakes Introduces New Floor Mount Triple Pedal Assembly

This floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12410 is for rear engine cars and part number 340-12411 is for front engine cars.

Wilwood introduces new Reverse Mount Swing 6:1 Single Pedal Assembly

Wilwood’s new Reverse Mount Swing Pedal Assembly, part number 340-13574 can be used as a clutch or brake pedal. Pedal features a lightweight aluminum frame with a super strong I-beam design forged aluminum pedal, and a laterally adjustable, non-slip waffled foot pad.

Wilwood Tandem Brake and Hydraulic Clutch Master Cylinder Pedal Assembly

Wilwood’s two newest pedal assemblies simplify the installation of tandem outlet brake master cylinders in vehicles also equipped with a hydraulic clutch.

Wilwood Disc Brakes Releases Adjustable Ratio Pedal Assemblies

Wilwood’s new forged aluminum pedals now offer multiple leverage ratios in a single unit via a height-adjustable pedal pad. This new design allows fine-tuning of pedal ratio, effort, feel, and ergonomics to the driver’s preference in forward or reverse swing and floor mounts, tandem or dual master cylinders, and individual pedal or clutch/brake and throttle combinations.

Wilwood Disc Brakes Releases Single Pedal Assemblies for Tandem Master Cylinders

Wilwood engineered new pedal assembly bases to accommodate their popular Tandem Master Cylinder lineup for both floor and swing mount applications. These forward-mounting bases are easy to install and include necessary hardware for most master cylinder or clutch actuation systems.

Floor Mount Triple Pedal Assembly

This floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12410 is for rear engine cars and part number 340-12411 is for front engine cars. Both units feature an aluminum frame with strong lightweight fabricated steel pedal arms.

Data Sheet: ds751.pdf

WILWOOD PULL TYPE CLUTCH SLAVE CYLINDER

Data Sheet: ds907.pdf

PEDAL ASSEMBLY, FLOOR MOUNT, BRAKE / CLUTCH / GAS

Data Sheet: ds1213.pdf

FORWARD MOUNT TANDEM MASTER CYLINDER BRAKE AND CLUTCH DUAL PEDAL ASSEMBLY

Data Sheet: ds1408.pdf

FORWARD SWING MOUNT DUAL PEDAL - OFFSET CLUTCH - TRIPLE MASTER - BAL. BAR - 5.50:1-6.25:1 ADJ. RATIOS

Data Sheet: ds1464.pdf

FORWARD FLOOR MOUNT CLUTCH PEDAL - 5.25:1-6.00:1 ADJ. RATIOS

Data Sheet: ds1467.pdf

FORWARD SWING MOUNT CLUTCH PEDAL - 6.25:1-7.00:1 ADJ. RATIOS

Data Sheet: ds1486.pdf

FORWARD FLOOR MOUNT BRAKE/CLUTCH/THROTTLE PEDALS - BALANCE BAR - 4.75:1-5.75:1 ADJ. RATIOS

Data Sheet: ds1487.pdf

FORWARD FLOOR MOUNT BRAKE/CLUTCH/THROTTLE PEDALS - TRU BAR - 4.75:1-5.75:1 ADJ. RATIOS

Data Sheet: ds1505.pdf

FORWARD SWING MOUNT DUAL PEDAL - OFFSET CLUTCH - DUAL MASTER - 5.50:1-6.25:1 ADJ. RATIOS

Data Sheet: ds1619.pdf

REVERSE FLOOR MOUNT BRAKE/CLUTCH PEDAL ASSEMBLY - TRIPLE MASTER - BALANCE BAR - 5.25:1-6.00:1 - ADJ. RATIOS

Data Sheet: ds1620.pdf

REVERSE FLOOR MOUNT BRAKE/CLUTCH PEDAL ASSEMBLY - TRIPLE MASTER - TRU-BAR - 5.25:1-6.00:1 - ADJ. RATIOS

Flyer: fl449.pdf

BRAKE AND CLUTCH PEDAL WITH TANDEM MASTER CYLINDER BRAKE AND HYDRAULIC CLUTCH


All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
Copyright © 1977 - 2024 Wilwood Engineering, Inc. - All Rights Reserved
Version: 3.05 June 23, 2023
​ ​