Rotor wear plates are used to prevent button “dig-in” and wear on Aluminum Dynamic Hats. Manufactured form stainless steel alloy for maximum abrasion resistance.

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 8 lug Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (8.80” Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (7.77’ Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Replacement rear rotor adapter for US built Shelby CSX6000 cars utilizing inch pattern mounting bolts. With 6 x 4.25” bolt circle and mount standard 8 x 7.00 bolt circle rotors. Made from high strength aluminum alloy and with a corrosion resistant e-coat finish.

Replacement front rotor adapter for import built Shelby CSX6000 cars utilizing metric mounting bolts. With 6 x 4.25” bolt circle and mount standard 8 x 7.00 bolt circle rotors. Made from high strength aluminum alloy and with a corrosion resistant e-coat finish.

Replacement rear rotor adapter for import built Shelby CSX6000 cars utilizing metric mounting bolts. With 6 x 4.25” bolt circle and mount standard 8 x 7.00 bolt circle rotors. Made from high strength aluminum alloy and with a corrosion resistant e-coat finish.

Replacement front rotor adapter for US built Shelby CSX6000 cars utilizing inch pattern mounting bolts. With 6 x 4.25” bolt circle and mount standard 8 x 7.00 bolt circle rotors. Made from high strength aluminum alloy and with a corrosion resistant e-coat finish.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor.

Rotor Bobbins are used with Aluminum Dynamic Hats. Manufactured form stainless steel alloy for maximum abrasion resistance.

Rotor Bobbins Springs are used with Aluminum Dynamic Hats. Manufactured form stainless steel alloy for maximum abrasion resistance.

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These solid steel t-nuts are available in different thickness and bolt hole sizes.

Rotor T-nuts kits are used with Dynamic Mount Hats or Rotor Adapters. This 8 piece kit with solid Titanium t-nuts offer a lightweight, high strength benefit in lower rotational weight and use 0.31” (5/16”) thru-hole.

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These solid Titanium t-nuts offer a lightweight, high strength benefit in lower rotational weight and use 0.31” (5/16” thru-hole.

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These solid steel t-nuts are available in different thickness and bolt hole sizes.

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

7.18" diameter internal c-clip used in Wilwood’s Dynamic lug mount rotor kits. Manufactured from a stainless steel alloy.

7.77" diameter internal c-clip used in Wilwood’s Dynamic lug mount rotor kits. Manufactured from a stainless steel alloy.

8.80" diameter internal c-clip used in Wilwood’s Dynamic lug mount rotor kits. Manufactured from a stainless steel alloy.

Rotor adapter for Sprint / Midget front hubs. Adapter is supplied with a standard 3 x 5.00” pattern for hub mounting and a dual 8 x 7.00” dynamic or fixed bolt pattern for rotor mounting. Made from high strength aluminum alloy and hard anodized for wear resistance.

Left front rotor adapter for Sprint front hubs. Adapter features a hub mount bolt circle of 3 x 5.00” used with rotor 160-10717 rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use 230-10800 Dynamic Rotor Bolt and T-nut Kit for rotor mounting.

Splined rotor adapter for Sprint rear. Adapter features a hub mount bolt circle of 3 x 5.00” used with rotor 160-10717 rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use 230-10800 Dynamic Rotor Bolt and T-nut Kit for rotor mounting.

Front rotor adapter for Asphalt Midget hubs utilizing 6 x 5.00 bolt circle and standard 6 x 5.50” bolt circle rotors. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodized finish. Use t-nut kit 230-14845

Rotor adapter for Wilwood’s GEN II Sprint / Midget inboard hubs. Adapter has unique mounting 6 x 5.50” dynamic or fixed bolt pattern for rotor mounting. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish.

Rotor adapter for Wilwood’s Pro Street and Drag hubs. Adapter is supplied with a 5 x 3.88” bolt circle pattern for hub mounting and a 8 x 7.00” bolt pattern for rotor mounting. Made from high strength aluminum alloy.

Rotor adapter for Wilwood’s Pro Street and Drag hubs. Adapter is supplied with a 5 x 3.88” bolt circle pattern for hub mounting and a 6 x 6.25” bolt pattern for rotor mounting. Made from high strength aluminum alloy.

Dynamic Rotor Adapter for Wilwood’s Pro Street and Drag hubs. Adapters is supplied with a 5 x 3.88” bolt circle pattern for hub mounting and a 6 x 6.25” bolt pattern for rotor mounting. Requires bolt & t-nut kit 230-14413 for rotor mounting. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish.

Dynamic Rotor Adapter for Wilwood’s Pro Street and Drag hubs. Adapters is supplied with a 5 x 3.88” bolt circle pattern for hub mounting and a 8 x 7.00” bolt pattern for rotor mounting. Requires bolt & t-nut kit 230-14414 for rotor mounting. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish.

Wilwood’s new Zero Offset Rotor Adapter for Wide 5 hubs adapts any standard fixed mount rotor hub with an 8 x 7.00” bolt circle, to a dynamic rotor mount. Adapter is supplied with a standard 8 x 7.00” pattern for hub mounting and an 8 x 7.00” dynamic pattern for rotor mounting. Made from high strength aluminum alloy and hard anodized for wear resistance. Use Dynamic mount bolt kit part # 230-14845 and Adapter to hub bolt kit 230-8390.

Dynamic Lug Mount Rotor Adapter for for Starlite 55 Wide 5 Racing Hubs. With a hub mount bolt circle of 8 x 7.00” and will mount any 8 lug, 7.18" snap ring rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use P/N 300-12561 Snap Ring and Wear Plate Kit to attach rotors. Uses mounting bolt kit P/N 230-17419.

Dynamic Lug Mount Rotor Adapter for for Starlite 55XD Wide 5 Racing Hubs. With a hub mount bolt circle of 5 x 4.50” and will mount any 8 lug, 7.18"" snap ring rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use 300-12561 Snap Ring and Wear Plate Kit to attach rotors.

Replacement rotor adapter for Wilwood Starlite XD55 hubs. Adapter is supplied with a 5 x 4.50” bolt pattern for hub mounting and a dual 8 x 7.00” dynamic or fixed bolt pattern for rotor mounting. Made from high strength aluminum alloy and hard anodized for wear resistance.

Replacement Floating Rotor Adapter for Wilwood’s Starlite 5 / 55 Dynamic Rotor Hubs. 8 x 7.00” bolt circle. Made from alloy steel and plated for corrosion resistance. Use 230-14845 Rotor Bolt and T-nut Kit to attach rotors.

Floating Rotor Adapter for Asphalt Racing Hubs with “backside” mountsand GEN III Sprint Inboard Hubs. With a hub mount bolt circle of 5 x 4.875” and will mount any 8 x 7.00” bolt circle rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish.. Use 230-14845 Rotor Bolt and T-nut Kit to attach rotors.

Dynamic Lug Mount Rotor Adapter for Asphalt Racing Hubs with “backside” mounts and GEN III Sprint Inboard Hubs. With a hub mount bolt circle of 5 x 4.875” and will mount any 8 lug, 7.18" snap ring rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use 300-12561 Snap Ring and Wear Plate Kit to attach rotors.

Dynamic Lug Mount Rotor Adapter for for Wilwood UTV Kits. With various hub mounting bolt circles for specific applications, these will mount a 8 lug, 7.18"" snap ring Solid or drilled rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use 300-11775 Snap Ring to attach rotor.

Dynamic Lug Mount Rotor Adapter for for Wilwood UTV Kits. With various hub mounting bolt circles for specific applications, these will mount a 8 lug, 7.18"" snap ring Solid or drilled rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use 300-11775 Snap Ring to attach rotor.

Dynamic Lug Mount Rotor Adapter for for Wilwood UTV Kits. With various hub mounting bolt circles for specific applications, these will mount a 8 lug, 7.18"" snap ring Solid or drilled rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use 300-11775 Snap Ring to attach rotor.