Porportioning Valves & Pressure Valves

Proportioning Valve, Knob Style, 3/8-24 seats.
Material: Aluminum / Steel
Finish: Clear Anodize

Proportioning Valve - Compact Knob Description

The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 100-1000 PSI and provide for a maximum decrease of 57% in line pressure, the most of any available valve. Adjuster knob with fine thread tuning provides precise pressure adjustment. This adjustment lets you fine tune the front to rear braking balance by proportionally decreasing the rear brake line pressure. Valves weigh only 5.2 ounces and have two .25” side mounting holes spaced 1.00” apart. This valve varies from our standard Knob Style Proportioning valve, as the in and out ports are 3/8-24 inverted flare seats and do not require tube nut adapters to directly install 3/8 tubing with inverted flare 3/8-24 nuts.

Ordering Information for Proportioning Valve - Compact Knob
Item No 260-10922
Info Details
Material Aluminum / Steel
Finish Clear Anodize
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Combination Proportioning Valve
Material: Aluminum / Steel
Finish: Clear Anodize

Proportioning Valve - Combo Knob Description

Wilwood’s new Combination Proportioning Valve substantially simplifies mounting, plumbing, wiring and brake proportioning adjustments on vehicles with custom brake systems. The combination block maintains full isolation between front and rear fluid circuits and can be used in conjunction with any tandem outlet or dual mount master cylinder assemblies. The rear circuit has a single inlet and single outlet with the adjustable proportioning valve. The front circuit has a single inlet with two outlets. It can be run as a single outlet with one outlet plugged, or used to split the plumbing on its way to the front calipers.

Ordering Information for Proportioning Valve - Combo Knob
Item No 260-11179
Info *New* Details
Material Aluminum / Steel
Finish Clear Anodize
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Proportioning Valve, Knob Style, 10mm x 1.00 seats.
Material: Aluminum / Steel
Finish: Clear Anodize

Proportioning Valve - Compact Description

The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 100-1000 PSI and provide for a maximum decrease of 57% in line pressure, the most of any available valve. Adjuster knob with fine thread tuning provides precise pressure adjustment. This adjustment lets you fine tune the front to rear braking balance by proportionally decreasing the rear brake line pressure. Valves weigh only 5.2 ounces and have two .25” side mounting holes spaced 1.00” apart. This valve varies from our standard Knob Style Proportioning valve, as the inlet and outlet ports are 10MM X 1 bubble flare seats and do not require tube nut adapters to directly install tubing with bubble flare 10MM x 1 nuts.

Ordering Information for Proportioning Valve - Compact
Item No 260-12627
Info Details
Material Aluminum / Steel
Finish Clear Anodize
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Combination Proportioning Valve w/ Tubes and L/H Mounting Bracket
Material: Aluminum / Steel
Finish: Clear Anodize / Black E-coat

Proportioning Valve - Combo Description

Wilwood finally has an elegant answer to the question, “Where do I mount my Combination Proportioning Valve?” with their new Mounting Bracket Kit. • Specifically designed to work in conjunction with Wilwood Aluminum Tandem Master Cylinders (P/N’s 260-8555, 260-8556, 260-9439, 260-12900 or 260-13375), in manual or boosted system applications. Kit includes: • Stainless steel fluid tubes are precision bent with preinstalled stainless tube nuts for a simple bolt-on installation between the Combination Proportioning Valve and the Wilwood Tandem Master Cylinder. • Stainless steel button head fasteners thread into the black e-coated L/H bracket for a simple installation and years of durable, rust-free performance. This complete Mounting Bracket Kit includes all the mounting hardware, plus a Combination Proportioning Valve, 260-11179.

Ordering Information for Proportioning Valve - Combo
Item No 260-13190
Info *New* Details
Material Aluminum / Steel
Finish Clear Anodize / Black E-coat
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Combination Proportioning Valve w/ Tubes and L/H Mounting Bracket, Remote Tandem Cylinders.
Material: Aluminum / Steel
Finish: Clear Anodize / Black E-coat

Proportioning Valve - Combo Description

Wilwood finally has an elegant answer to the question, “Where do I mount my Combination Proportioning Valve?” with their new Mounting Bracket Kit. Specifically designed to work in conjunction with Wilwood Remote Tandem Master Cylinders in manual or boosted system applications. Kit includes: Stainless steel fluid tubes are precision bent with preinstalled stainless tube nuts for a simple bolt-on installation between the Combination Proportioning Valve and the Wilwood Tandem Master Cylinder. Stainless steel button head fasteners thread into the black e-coated L/H bracket for a simple installation and years of durable, rust-free performance. This complete Mounting Bracket Kit includes all the mounting hardware, plus a Combination Proportioning Valve, 260-11179.

Ordering Information for Proportioning Valve - Combo
Item No 260-14248
Info *New* Details
Material Aluminum / Steel
Finish Clear Anodize / Black E-coat
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Combination Proportioning Valve w/ Tubes and R/H Mounting Bracket
Material: Aluminum / Steel
Finish: Clear Anodize / Black E-coat

Proportioning Valve - Combo Description

Wilwood finally has an elegant answer to the question, “Where do I mount my Combination Proportioning Valve?” with their new Mounting Bracket Kit. • Specifically designed to work in conjunction with Wilwood Aluminum Tandem Master Cylinders (P/N’s 260-8555, 260-8556, 260-9439, 260-12900 or 260-13375), in manual or boosted system applications. Kit includes: • Stainless steel fluid tubes are precision bent with preinstalled stainless tube nuts for a simple bolt-on installation between the Combination Proportioning Valve and the Wilwood Tandem Master Cylinder. • Stainless steel button head fasteners thread into the black e-coated R/H bracket for a simple installation and years of durable, rust-free performance. This complete Mounting Bracket Kit includes all the mounting hardware, plus a Combination Proportioning Valve, 260-11179.

Ordering Information for Proportioning Valve - Combo
Item No 260-15048
Info *New* Details
Material Aluminum / Steel
Finish Clear Anodize / Black E-coat
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Proportioning Valve, Knob Style.
Material: Aluminum / Steel
Finish: Clear Anodize

Proportioning Valve - Compact Knob Description

The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 100-1000 PSI and provide for a maximum decrease of 57% in line pressure, the most of any available valve. This proportioning valve has six preset points actuated by moving a lever allowing racers to quickly adjust brake bias during a race. The lever “clicks” into the six positions for positive adjustment. Valves weigh only 6.1 ounces (lever), and have two .25” side mounting holes spaced 1.00” apart. Inlet / outlet ports are 1/8-27 NPT and valves are supplied with two 1/8-27 NPT to 3/-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.

Ordering Information for Proportioning Valve - Compact Knob
Item No 260-8419
Info Details
Material Aluminum / Steel
Finish Clear Anodize
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Proportioning Valve, Lever Style.
Material: Aluminum / Steel
Finish: Clear Anodize

Proportioning Valve - Compact Lever Description

The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 100-1000 PSI and provide for a maximum decrease of 57% in line pressure, the most of any available valve. This proportioning valve has six preset points actuated by moving a lever allowing racers to quickly adjust brake bias during a race. The lever “clicks” into the six positions for positive adjustment. Valves weigh only 6.1 ounces (lever), and have two .25” side mounting holes spaced 1.00” apart. Inlet / outlet ports are 1/8-27 NPT and valves are supplied with two 1/8-27 NPT to 3/-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.

Ordering Information for Proportioning Valve - Compact Lever
Item No 260-8420
Info Details
Material Aluminum / Steel
Finish Clear Anodize
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Residual Pressure Valve 2lb, Blue, w/o Fittings.
Material: Aluminum
Finish: Blue Anodize

Residual Pressure Valve - 2lb Description

Wilwood two pound and ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag. With drum brakes, a ten pound valve is used to compensate for return spring tension and maintain wheel cylinder sealing in the drums. Residual Pressure Valves are made from billet aluminum and color coded for easy identification. Valves with fittings are supplied with two 1/8-27 NPT to 3/-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.

Ordering Information for Residual Pressure Valve - 2lb
Item No 260-13706
Info Details
Material Aluminum
Finish Blue Anodize
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Residual Pressure Valve 10lb, Red, w/o Fittings.
Material: Aluminum
Finish: Red Anodize

Residual Pressure Valve - 10lb Description

Wilwood two pound and ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag. With drum brakes, a ten pound valve is used to compensate for return spring tension and maintain wheel cylinder sealing in the drums. Residual Pressure Valves are made from billet aluminum and color coded for easy identification. Valves with fittings are supplied with two 1/8-27 NPT to 3/-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.

Ordering Information for Residual Pressure Valve - 10lb
Item No 260-13707
Info Details
Material Aluminum
Finish Red Anodize
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Residual Pressure Valve 2lb, Blue, w/ Fittings.
Material: Aluminum
Finish: Blue Anodize

Residual Pressure Valve - 2lb Description

Wilwood two pound and ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag. With drum brakes, a ten pound valve is used to compensate for return spring tension and maintain wheel cylinder sealing in the drums. Residual Pressure Valves are made from billet aluminum and color coded for easy identification. Valves with fittings are supplied with two 1/8-27 NPT to 3/-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.

Ordering Information for Residual Pressure Valve - 2lb
Item No 260-13783
Info Details
Material Aluminum
Finish Blue Anodize
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Residual Pressure Valve 10lb, Red, w/ Fittings.
Material: Aluminum
Finish: Red Anodize

Residual Pressure Valve - 10lb Description

Wilwood two pound and ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag. With drum brakes, a ten pound valve is used to compensate for return spring tension and maintain wheel cylinder sealing in the drums. Residual Pressure Valves are made from billet aluminum and color coded for easy identification. Valves with fittings are supplied with two 1/8-27 NPT to 3/-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.

Ordering Information for Residual Pressure Valve - 10lb
Item No 260-13784
Info Details
Material Aluminum
Finish Red Anodize
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Self Bleed Check Valve, Black.
Material: Aluminum
Finish: Black Anodize

Self Bleed Check Valve Description

Wilwood Check Valves, or Flow Control Valves are used in conjunction with our caliper Self Bleed Lines. Together they form a closed loop brake fluid system that allows small amounts of brake fluid to circulate every time the brake pedal is depressed, thereby eliminating the possibility of localized fluid boiling and build-up of gases within the brake fluid. Gases end up being vented back into the master cylinder reservoir rather than trapped within the caliper and brake lines. Our Check Valve accepts standard 1/8-27 NPT fittings. For plumbing instructions request Wilwood’s Data Sheet, DS-213.

Ordering Information for Self Bleed Check Valve
Item No 260-3501
Info Details
Material Aluminum
Finish Black Anodize
Price Call for OE Pricing
Purchase
Call (805) 388-1188
Brake Shutoff Valve & Solenoid, Electric.
Material: Aluminum / Steel
Finish: Clear Anodize

Shutoff Valve Description

This valve can be used as a brake shut-off. When energized, the valve will block pressure from reaching downstream. The valve does not prevent fluid from returning to the master cylinder. This eliminates the possibility of trapping pressure when activating the valve. Requires a 12 Volt, 5 amp (recommended) fused power source through a toggle switch. Warning: Not a line lock assembly. Not for street use. Please read instruction sheet available at http://www.wilwood.com/pdf/ds572.pdf before attempting installation

Ordering Information for Shutoff Valve
Item No 260-9921
Info Details
Material Aluminum / Steel
Finish Clear Anodize
Price Call for OE Pricing
Purchase
Call (805) 388-1188


Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved