dynapro radial front drag brake kit


dynapro radial front drag brake kit
(8) Brake Kits Available

Dynapro Radial Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 12.9
Caliper Mount: Radial
Min. Wheel Diameter: 17

Dynapro Radial Front Drag Brake Kit Description

DynaPro4R Drag Race front brake kits deliver high torque stopping power with a substantial weight savings over the OE brake components. Dynamic mount steel rotors weigh only 5.7 pounds each. They attach to the OE hubs with lightweight forged aluminum hats using our T-nut mounting system that allows the rotor to move independently of the hat during heat cycles. This eliminates stress at the mount points and the subsequent rotor distortion that can otherwise occur with fixed mount steel plate rotors. Dynamic mount rotors also assure full release from the pads to run true and drag free down the track. Clamping force is provided by radial mount DynaPro 4R four piston aluminum calipers weighing in at only 4.1 pounds each. DP4R calipers feature stainless steel pistons, internal bore seals, stainless steel bridge wear plates, and allow easy access to the pads for service without removing the calipers from the mount. BP-20 compound SmartPads provide high response and holding power when cold, and resistance to fade when hot. The complete package mounts to the OE spindle with full bolt-on installation. This kit is configured for drag racing only and is not recommended for street use. A minimum size 17” wheels are required along with a stainless steel braided flexline kit available separately.

This kit fits the following vehicles:
Ford Mustang 2015 Ford Mustang 2015-2018 Ford Mustang 2016-2017 Ford Mustang 2016-2018
Ordering Information for Dynapro Radial Front Drag Brake Kit
Item No 140-14100-D
Info Details
Caliper Color Black Anodize
Rotor Drilled
Line Kit 220-13912 *
Price $1,455.94
Purchase
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 12.88
Caliper Mount: Radial
Min. Wheel Diameter: 17

Dynapro Radial Front Drag Brake Kit Description

This DynaPro4R Drag Race front brake kit is configured with GT48 directional vane Spec 37 alloy vented iron rotors for optimized thermal stability and durability on drag cars that will also see street use. DP4R race kits deliver high torque stopping power with a substantial weight savings over the OE brake components. These 12.88” x .81” rotors weigh only 10.2 pounds each. Lightweight forged aluminum hats provide additional weight savings to mount the rotors to the OE hubs. Clamping force is provided by radial mount DynaPro 4R four piston aluminum calipers weighing in at only 4.1 pounds each. DP4R calipers feature stainless steel pistons, internal bore seals, stainless steel bridge wear plates, and e-clip style pad retaining pins to allow quick and easy access to the pads without removing the calipers from the mount. BP-20 compound SmartPads provide high response and holding power when cold, and resistance to fade when hot. The complete package mounts to the OE spindle and hub with full bolt-on installation. A minimum size 17” wheels are required along with a stainless steel braided flexline kit available separately.

This kit fits the following vehicles:
Ford Mustang 2015 Ford Mustang 2015-2018 Ford Mustang 2016-2017 Ford Mustang 2016-2018
Ordering Information for Dynapro Radial Front Drag Brake Kit
Item No 140-14103
Info Details
Caliper Color Black Anodize
Rotor Drilled
Line Kit 220-13912 *
Price $1,343.94
Purchase
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Radial
Min. Wheel Diameter: 15

Dynapro Radial Front Drag Brake Kit Description

NDPR forged billet, radial mount four piston calipers are used in this select group of drag racing kits. The OE brakes on vehicles originally equipped with 16” or larger wheels generally do not fit inside the popular 15” drag wheels. Specially designed radial caliper mount brackets bolt directly to the OE caliper mount, and provide secure and accurate mounting for the NDPR caliper. Kits with 3/8” steel rotors are recommended for four-wheel disc brake cars up to 2,800 pounds. Kits with .81” rotors should be used on cars over 2,800 pound cars, or lighter cars running extreme speeds desiring increased rotor durability.

This kit fits the following vehicles:
Ford Mustang 1994-2004 Ford Mustang 1999-2000 Ford Mustang 2001 Ford Mustang 2003-2004
Ordering Information for Dynapro Radial Front Drag Brake Kit
Item No 140-10015-D
Info Details
Caliper Color Black Anodize
Rotor Drilled
Line Kit 220-6458 *
Price $960.90
Purchase
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Radial
Min. Wheel Diameter: 15

Dynapro Radial Front Drag Brake Kit Description

NDPR forged billet, radial mount four piston calipers are used in this select group of drag racing kits. The OE brakes on vehicles originally equipped with 16” or larger wheels generally do not fit inside the popular 15” drag wheels. Specially designed radial caliper mount brackets bolt directly to the OE caliper mount, and provide secure and accurate mounting for the NDPR caliper. Kits with 3/8” steel rotors are recommended for four-wheel disc brake cars up to 2,800 pounds. Kits with .81” rotors should be used on cars over 2,800 pound cars, or lighter cars running extreme speeds desiring increased rotor durability.

This kit fits the following vehicles:
Ford Mustang 1994-2004 Ford Mustang 1999-2000 Ford Mustang 2001 Ford Mustang 2003-2004
Ordering Information for Dynapro Radial Front Drag Brake Kit
Item No 140-10016
Info Details
Caliper Color Black Anodize
Rotor Undrilled
Line Kit 220-6458 *
Price $936.26
Purchase
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Radial
Min. Wheel Diameter: 15

Dynapro Radial Front Drag Brake Kit Description

NDPR forged billet, radial mount four piston calipers are used in this select group of drag racing kits. The OE brakes on vehicles originally equipped with 16” or larger wheels generally do not fit inside the popular 15” drag wheels. Specially designed radial caliper mount brackets bolt directly to the OE caliper mount, and provide secure and accurate mounting for the NDPR caliper. Kits with 3/8” steel rotors are recommended for four-wheel disc brake cars up to 2,800 pounds. Kits with .81” rotors should be used on cars over 2,800 pound cars, or lighter cars running extreme speeds desiring increased rotor durability.

This kit fits the following vehicles:
Ford Mustang 2005-2013 Ford Mustang 2007-2009 Ford Mustang 2007-2014 Ford Mustang 2008 Ford Mustang 2011-2012 Ford Mustang 2012-2013 Ford Mustang 2014
Ordering Information for Dynapro Radial Front Drag Brake Kit
Item No 140-10542
Info Details
Caliper Color Black Anodize
Rotor Undrilled
Line Kit 220-9111 *
Price $936.26
Purchase
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Radial
Min. Wheel Diameter: 15

Dynapro Radial Front Drag Brake Kit Description

NDPR forged billet, radial mount four piston calipers are used in this select group of drag racing kits. The OE brakes on vehicles originally equipped with 16” or larger wheels generally do not fit inside the popular 15” drag wheels. Specially designed radial caliper mount brackets bolt directly to the OE caliper mount, and provide secure and accurate mounting for the NDPR caliper. Kits with 3/8” steel rotors are recommended for four-wheel disc brake cars up to 2,800 pounds. Kits with .81” rotors should be used on cars over 2,800 pound cars, or lighter cars running extreme speeds desiring increased rotor durability.

This kit fits the following vehicles:
Chevrolet Camaro 1993-1997 Chevrolet Camaro 1998-2002 Pontiac Firebird 1998-2002
Ordering Information for Dynapro Radial Front Drag Brake Kit
Item No 140-10786-D
Info Details
Caliper Color Black Anodize
Rotor Drilled
Line Kit 220-6746 *
Price $960.90
Purchase
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Radial
Min. Wheel Diameter: 15

Dynapro Radial Front Drag Brake Kit Description

NDPR forged billet, radial mount four piston calipers are used in this select group of drag racing kits. The OE brakes on vehicles originally equipped with 16” or larger wheels generally do not fit inside the popular 15” drag wheels. Specially designed radial caliper mount brackets bolt directly to the OE caliper mount, and provide secure and accurate mounting for the NDPR caliper. Kits with 3/8” steel rotors are recommended for four-wheel disc brake cars up to 2,800 pounds. Kits with .81” rotors should be used on cars over 2,800 pound cars, or lighter cars running extreme speeds desiring increased rotor durability.

This kit fits the following vehicles:
Chevrolet Camaro 1993-1997 Chevrolet Camaro 1998-2002 Pontiac Firebird 1998-2002
Ordering Information for Dynapro Radial Front Drag Brake Kit
Item No 140-10787
Info Details
Caliper Color Black Anodize
Rotor Undrilled
Line Kit 220-6746 *
Price $936.26
Purchase
Call (805) 388-1188
Item No 140-10787-D
Info Details
Caliper Color Black Anodize
Rotor Drilled & Slotted
Line Kit 220-6746 *
Price $1,048.26
Purchase
Call (805) 388-1188





Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved