Bracket Kit, Caliper Mounting (Racing)

Forged Superlite Radial Mount calipers are manufactured from high strength aluminum alloy with an e-coat finish. Bracket set 250-6309 is designed for any 3.50”mount center. Bracket mounts superlite series radial caliper and 12.19 diameter rotor. Will fit 11.75 diameter rotors when original equipment and mounts were designed for 11.75 diameter.

Bracket Kit, Open Wheel - Front

Wilwood's Open Wheel Front Bracket kits are manufactured from high-strength aluminum alloy with an e-coat finish. Bracket 250-15316 is designed for Modified Asphalt front spindles with a 3.40" mount using the Forged Superlite 4 or 6R with a 5.98” radial mount and 12.00” diameter rotor.

Bracket Kit, Caliper Mounting (Racing)

Wilwood’s XRZ4R bracket mounts the XRZ4 Radial Mount calipers to 3.50” center to center lug mount used on the front Late Model and N.E. Modified Asphalt spindles. Mounting height is optimized to allow mounting this caliper in applications that use 11.75” or 12.19” diameter rotors depending on current spindle bracket. Mounts have 10 degree clocking to allow more upper A-arm clearance. Brackets are a pair L/H & R/H and include studs, shim and the mounting hardware. (NOTE THESE MOUNTS ARE ONLY TO BE USED WITH XRZ CALIPERS

Bracket Kit, Caliper Mounting (Racing)

Forged Superlite Radial Mount caliper brackets are manufactured from high strength aluminum alloy with an e-coat finish. Bracket set 249-16488/89 is designed for a 3.50” mount center and a 5 degree mount offset. Bracket mounts Superlite series radial caliper with 11.75" diameter rotor.

Bolt Kit-Rotor

Wilwood’s Dynamic Mount Rotor Bolt kit 230-14414 contains bolts and hardware for dynamic mounting of iron steel rotor to specific hat or rotor adapters.

Bolt-Button Head

Wilwood’s Button Headt Bolts are manufactured from high strength alloy steel or stainless steel. Various plating methods are used depending on application.

Bolt Kit-Rotor Adapter

Wilwood’s Rotor Adapter Bolt Kits contain bolts and hardware for mounting rotor adapters to specific hubs.

Bolt Kit-Drive Flange

Wilwood's Drive Flange Bolt kit features 5 quantity, 7/16-14, 12 Point bolts for 5 bolt drive flanges.

Bolt Kit-Rotor

Wilwood’s Rotor Bolt kits contain bolts and hardware for mounting rotors specific hat or adapters.

T-Nuts

Rotor T-nuts kits are used with Dynamic Mount Hats or Rotor Adapters. This 8 piece kit with solid Titanium t-nuts offer a lightweight, high strength benefit in lower rotational weight and use 0.31” (5/16”) thru-hole.

Dynamic Lug Rotor Mounting and Snap Ring Kit

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 8 lug Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Rotor Adapter-5 x 5

Dynamic Lug Mount Rotor Adapter for Asphalt Racing Hubs with “backside” mounts and GEN III Sprint Inboard Hubs. With a hub mount bolt circle of 5 x 4.875” and will mount any 8 lug, 7.18" snap ring rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use 300-12561 Snap Ring and Wear Plate Kit to attach rotors.