M/C Fitting

Wilwood’s fittings are manufactured to high quality standards. This fitting kit been designed for use with our Compact Remote Master Cylinders with 11/16-20 inlet thread and will adapt to -3 AN male fitting used most AN stainless brake lines assemblies. Also Includes the required o-ring seal (part # 210-12020)

M/C Fitting

Wilwood’s exclusive, custom master cylinder inlet fitting kit. Designed for Wilwood’s Compact Remote Master Cylinder inlets with a 11/16-20 female thread. Allow adaption to popular 1/8-27 female thread inlet. Supplied with sealing O-ring.

Bracket Kit, Caliper Mounting (Racing)

Forged Superlite Radial Mount calipers are manufactured from high strength aluminum alloy with an e-coat finish. Bracket set 250-6309 is designed for any 3.50”mount center. Bracket mounts superlite series radial caliper and 12.19 diameter rotor. Will fit 11.75 diameter rotors when original equipment and mounts were designed for 11.75 diameter.

Bracket Kit, Rear

Caliper Bracket Mount kit, Radial mount for FNSLR series of calipers on 5.98 mount centers. Made from high strength aluminum alloy and contain studs and caliper mounting hardware. Designed for use with specific vehicle applications and rotor diameters

Bracket Kit, Caliper Mounting (Racing)

Wilwood's 3.5" bolt center GN6R bracket kits allows spindles originally configured for use with 3.5" bolt center lug mount Superlite series calipers to accept the GN6R radial mount calipers with the original diameter rotors. Bracket kits include studs, shims and the mounting hardware.

NOTE: If larger diameter rotors will be used with the GN6R radial mount upgrade, the lug mount attachment points on the spindle will require relocation to the appropriate height for the new rotor diameter. Contact the spindle manufacturer or the chassis builder for specific information on updating your spindles.

Bracket Kit, Caliper Mounting (Racing)

Wilwood’s FSL6R 12.19” Late Model bracket mounts the Forged Superlite Radial Mount calipers to 3.50” center to center lug mount. Bracket mounting height has been modified to allow mounting FNSL6R calipers in applications that originally used 11.75” diameter rotors and allows use of larger 12.19” diameter rotors without modifying the existing brackets. Brackets include studs, shim and the mounting hardware

Bracket Kit, Caliper Mounting (Racing)

Forged Superlite Radial Mount caliper brackets are manufactured from high strength aluminum alloy with an e-coat finish. Bracket set 249-16488/89 is designed for a 3.50” mount center and a 5 degree mount offset. Bracket mounts Superlite series radial caliper with 11.75" diameter rotor.

Bolt Kit-Rotor

Wilwood’s Dynamic Mount Rotor Bolt kit 230-14414 contains bolts and hardware for dynamic mounting of iron steel rotor to specific hat or rotor adapters.

Rotor Adapter-5 x 5

Floating Rotor Adapter for Asphalt Racing Hubs with “backside” mountsand GEN III Sprint Inboard Hubs. With a hub mount bolt circle of 5 x 4.875” and will mount any 8 x 7.00” bolt circle rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish.. Use 230-14845 Rotor Bolt and T-nut Kit to attach rotors.

Dynamic Lug Rotor Mounting and Snap Ring Kit

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (7.77’ Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.