Monday, May 25, 2015
Drag Race Rotor Hats
  Select from the following options to display a list of hats matching your required specifications:

  Rotor Bolt Circle: Hat Offset: Wheel Stud Circles:   
        

   Search Results HATS >>
Big Brake Hat - Short Offset
   Rotor Bolt Circle: 12 x 7.00    Hat Offset: 0.41    Wheel Stud Circle(s): 5 Holes  on 4.5           Big Brake Hat - Short Offset
Big Brake Hat - Short Offset

Big Brake Hat - Short Offset zoom image
Big Brake Hat - Short Offset Drawing

Big Brake Hat - Short Offset Drawing zoom image

Big Brake Hat - Short Offset Description

GT Series Big Brake Short Offset hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Short Offset Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:

   Ordering Information for Big Brake Hat - Short Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.8 4.5 / 0.58      6.18 Fixed Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Big Brake Hat - Short Offset
   Rotor Bolt Circle: 12 x 8.25    Hat Offset: 0.23    Wheel Stud Circle(s): 5 Holes  on 4.75           Big Brake Hat - Short Offset
Big Brake Hat - Short Offset

Big Brake Hat - Short Offset zoom image
Big Brake Hat - Short Offset Drawing

Big Brake Hat - Short Offset Drawing zoom image

Big Brake Hat - Short Offset Description

GT Series Big Brake Short Offset hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Short Offset Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:

   Ordering Information for Big Brake Hat - Short Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.78 4.75 / 0.52      7.75 Fixed Mount Aluminum - 0.3 $170.58
Call (805) 388-1188

Big Brake Hat - Short Offset
   Rotor Bolt Circle: 12 x 8.25    Hat Offset: 0.26    Wheel Stud Circle(s): 5 Holes  on 4.5           Big Brake Hat - Short Offset
Big Brake Hat - Short Offset

Big Brake Hat - Short Offset zoom image
Big Brake Hat - Short Offset Drawing

Big Brake Hat - Short Offset Drawing zoom image

Big Brake Hat - Short Offset Description

GT Series Big Brake Short Offset hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Short Offset Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:

   Ordering Information for Big Brake Hat - Short Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.8 4.5 / 0.58      7.75 Fixed Mount Aluminum - 0.32 $170.58
Call (805) 388-1188

Big Brake Hat - Short Offset
   Rotor Bolt Circle: 12 x 8.25    Hat Offset: 0.58    Wheel Stud Circle(s): 5 Holes  on 4.5           Big Brake Hat - Short Offset
Big Brake Hat - Short Offset

Big Brake Hat - Short Offset zoom image
Big Brake Hat - Short Offset Drawing

Big Brake Hat - Short Offset Drawing zoom image

Big Brake Hat - Short Offset Description

GT Series Big Brake Short Offset hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Short Offset Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:

   Ordering Information for Big Brake Hat - Short Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.8 4.5 / 0.59      7.37 Fixed Mount Aluminum - 0.25 $299.25
Call (805) 388-1188

Big Brake Hat - Short Offset
   Rotor Bolt Circle: 12 x 8.75    Hat Offset: -0.09    Wheel Stud Circle(s): 5 Holes  on 4.5           Big Brake Hat - Short Offset
Big Brake Hat - Short Offset

Big Brake Hat - Short Offset zoom image
Big Brake Hat - Short Offset Drawing

Big Brake Hat - Short Offset Drawing zoom image

Big Brake Hat - Short Offset Description

GT Series Big Brake Short Offset hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Short Offset Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Big Brake Hat - Short Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.58      8.25 Fixed Mount Aluminum - 0.31 $170.58
Call (805) 388-1188

Big Brake Hat - Short Offset
   Rotor Bolt Circle: 12 x 8.75    Hat Offset: 0.7    Wheel Stud Circle(s): 5 Holes  on 4.41           Big Brake Hat - Short Offset
Big Brake Hat - Short Offset

Big Brake Hat - Short Offset zoom image
Big Brake Hat - Short Offset Drawing

Big Brake Hat - Short Offset Drawing zoom image

Big Brake Hat - Short Offset Description

GT Series Big Brake Short Offset hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Short Offset Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Big Brake Hat - Short Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.41 / 0.59      7.09 Fixed Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Big Brake Hat - Flared Bell
   Rotor Bolt Circle: 12 x 8.75    Hat Offset: 0.85    Wheel Stud Circle(s): 5 Holes  on 5           Big Brake Hat - Flared Bell
Big Brake Hat - Flared Bell

Big Brake Hat - Flared Bell zoom image
Big Brake Hat - Flared Bell Drawing

Big Brake Hat - Flared Bell Drawing zoom image

Big Brake Hat - Flared Bell Description

GT Series Big Brake Flared Bell hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions.Flared Bell Hats are generally used with rotor mount bolt circles of 8.38" and larger. Offsets range from 1.88" to 3.00" for rotor diameters 12.19" and up.

NOTE & CAUTIONS:

   Ordering Information for Big Brake Hat - Flared Bell
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.8 5 / 0.52      6.61 Fixed Mount Aluminum - 0.32 $170.58
Call (805) 388-1188

Big Brake Hat - Flared Bell
   Rotor Bolt Circle: 12 x 8.75    Hat Offset: 1    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75      Big Brake Hat - Flared Bell
Big Brake Hat - Flared Bell

Big Brake Hat - Flared Bell zoom image
Big Brake Hat - Flared Bell Drawing

Big Brake Hat - Flared Bell Drawing zoom image

Big Brake Hat - Flared Bell Description

GT Series Big Brake Flared Bell hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions.Flared Bell Hats are generally used with rotor mount bolt circles of 8.38" and larger. Offsets range from 1.88" to 3.00" for rotor diameters 12.19" and up.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Big Brake Hat - Flared Bell
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52    7.09 Fixed Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Parking Brake Hat - Standard
   Rotor Bolt Circle: 12 x 8.75    Hat Offset: 1.32    Wheel Stud Circle(s): 5 Holes  on 4.75           Parking Brake Hat - Standard
Parking Brake Hat - Standard

Parking Brake Hat - Standard
Parking Brake Hat - Standard Drawing

Parking Brake Hat - Standard Drawing

Parking Brake Hat - Standard Description

These premium grade aluminum hats are used with Wilwood's internal shoe parking brake kits. Each hat is a precision machined, threaded hole design for use in conjunction with through-hole mount rotors. After machining, the hats are electro-coated for corrosion resistance.

NOTE & CAUTIONS:

   Ordering Information for Parking Brake Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.78 4.75 / 0.52      6.47 Fixed Mount Aluminum 7.48 0.25 $134.94
Call (805) 388-1188

Parking Brake Hat - Standard
   Rotor Bolt Circle: 12 x 8.75    Hat Offset: 1.5    Wheel Stud Circle(s): 5 Holes  on 3.93           Parking Brake Hat - Standard
Parking Brake Hat - Standard

Parking Brake Hat - Standard
Parking Brake Hat - Standard Drawing

Parking Brake Hat - Standard Drawing

Parking Brake Hat - Standard Description

These premium grade aluminum hats are used with Wilwood's internal shoe parking brake kits. Each hat is a precision machined, threaded hole design for use in conjunction with through-hole mount rotors. After machining, the hats are electro-coated for corrosion resistance.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Parking Brake Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 3.93 / 0.52      6.83 Fixed Mount Aluminum 7.48 0.26 $169.44
Call (805) 388-1188

Big Brake Hat - Flared Bell
   Rotor Bolt Circle: 12 x 8.75    Hat Offset: 1.5    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75      Big Brake Hat - Flared Bell
Big Brake Hat - Flared Bell

Big Brake Hat - Flared Bell zoom image
Big Brake Hat - Flared Bell Drawing

Big Brake Hat - Flared Bell Drawing zoom image

Big Brake Hat - Flared Bell Description

GT Series Big Brake Flared Bell hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions.Flared Bell Hats are generally used with rotor mount bolt circles of 8.38" and larger. Offsets range from 1.88" to 3.00" for rotor diameters 12.19" and up.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Big Brake Hat - Flared Bell
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52    6.4 Fixed Mount Aluminum - 0.25 $194.25
Call (805) 388-1188

Parking Brake Hat - Standard
   Rotor Bolt Circle: 12 x 8.75    Hat Offset: 1.66    Wheel Stud Circle(s): 5 Holes  on 5.75           Parking Brake Hat - Standard
Parking Brake Hat - Standard

Parking Brake Hat - Standard
Parking Brake Hat - Standard Drawing

Parking Brake Hat - Standard Drawing

Parking Brake Hat - Standard Description

These premium grade aluminum hats are used with Wilwood's internal shoe parking brake kits. Each hat is a precision machined, threaded hole design for use in conjunction with through-hole mount rotors. After machining, the hats are electro-coated for corrosion resistance.

NOTE & CAUTIONS:

   Ordering Information for Parking Brake Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
5 5.75 / 0.39      6.85 Fixed Mount Aluminum 7.23 0.19 $209.94
Call (805) 388-1188

Big Brake Hat - Flared Bell
   Rotor Bolt Circle: 12 x 8.75    Hat Offset: 2    Wheel Stud Circle(s): 5 Holes  on 4.5           Big Brake Hat - Flared Bell
Big Brake Hat - Flared Bell

Big Brake Hat - Flared Bell
Big Brake Hat - Flared Bell Drawing

Big Brake Hat - Flared Bell Drawing

Big Brake Hat - Flared Bell Description

GT Series Big Brake Flared Bell hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions.Flared Bell Hats are generally used with rotor mount bolt circles of 8.38" and larger. Offsets range from 1.88" to 3.00" for rotor diameters 12.19" and up.

NOTE & CAUTIONS:

   Ordering Information for Big Brake Hat - Flared Bell
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.8 4.5 / 0.63      7.16 Fixed Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Big Brake Hat - Flared Bell
   Rotor Bolt Circle: 12 x 8.75    Hat Offset: 2    Wheel Stud Circle(s): 5 Holes  on 5.5           Big Brake Hat - Flared Bell
Big Brake Hat - Flared Bell

Big Brake Hat - Flared Bell zoom image
Big Brake Hat - Flared Bell Drawing

Big Brake Hat - Flared Bell Drawing zoom image

Big Brake Hat - Flared Bell Description

GT Series Big Brake Flared Bell hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions.Flared Bell Hats are generally used with rotor mount bolt circles of 8.38" and larger. Offsets range from 1.88" to 3.00" for rotor diameters 12.19" and up.

NOTE & CAUTIONS:

   Ordering Information for Big Brake Hat - Flared Bell
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
4.28 5.5 / 0.64      6.6 Fixed Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Big Brake Hat - Flared Bell
   Rotor Bolt Circle: 12 x 8.75    Hat Offset: 2.1    Wheel Stud Circle(s): 5 Holes  on 4.5           Big Brake Hat - Flared Bell
Big Brake Hat - Flared Bell

Big Brake Hat - Flared Bell
Big Brake Hat - Flared Bell Drawing

Big Brake Hat - Flared Bell Drawing

Big Brake Hat - Flared Bell Description

GT Series Big Brake Flared Bell hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions.Flared Bell Hats are generally used with rotor mount bolt circles of 8.38" and larger. Offsets range from 1.88" to 3.00" for rotor diameters 12.19" and up.

NOTE & CAUTIONS:

   Ordering Information for Big Brake Hat - Flared Bell
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.8 4.5 / 0.63      6.78 Fixed Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Drag Hat - Spindle Mount
   Rotor Bolt Circle: 5 x 5.00    Hat Offset: 1    Wheel Stud Circle(s): 5 Holes  on 4.75           Drag Hat - Spindle Mount
Drag Hat - Spindle Mount

Drag Hat - Spindle Mount zoom image
Drag Hat - Spindle Mount Drawing

Drag Hat - Spindle Mount Drawing zoom image

Drag Hat - Spindle Mount Description

Wilwood's Spindle Mount Rotor Hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. For direct to spindle mount wheel applications.

NOTE & CAUTIONS:

   Ordering Information for Drag Hat - Spindle Mount
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.57 4.75 / 0.39      Fixed Mount Aluminum - 0.22 $110.94
Call (805) 388-1188

Drag Hat - Shallow Offset
   Rotor Bolt Circle: 6 x 6.25    Hat Offset: 0.66    Wheel Stud Circle(s): 4 Holes  on 3.93           Drag Hat - Shallow Offset
Drag Hat - Shallow Offset

Drag Hat - Shallow Offset zoom image
Drag Hat - Shallow Offset Drawing

Drag Hat - Shallow Offset Drawing zoom image

Drag Hat - Shallow Offset Description

GT Series Shallow Offset Drag hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Shallow Offset Drag Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:

   Ordering Information for Drag Hat - Shallow Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.53 3.93 / 0.5      5.1 Fixed Mount Aluminum - 0.32 $94.44
Call (805) 388-1188

Drag Hat - Shallow Offset
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 0.6    Wheel Stud Circle(s): 4 Holes  on 4.25           Drag Hat - Shallow Offset
Drag Hat - Shallow Offset

Drag Hat - Shallow Offset zoom image
Drag Hat - Shallow Offset Drawing

Drag Hat - Shallow Offset Drawing zoom image

Drag Hat - Shallow Offset Description

GT Series Shallow Offset Drag hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Shallow Offset Drag Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Drag Hat - Shallow Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.25 / 0.52      5.9 Fixed Mount Aluminum - 0.24 $163.76
Call (805) 388-1188

Drag Hat - Shallow Offset
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 0.65    Wheel Stud Circle(s): 5 Holes  on 4.5           Drag Hat - Shallow Offset
Drag Hat - Shallow Offset

Drag Hat - Shallow Offset zoom image
Drag Hat - Shallow Offset Drawing

Drag Hat - Shallow Offset Drawing zoom image

Drag Hat - Shallow Offset Description

GT Series Shallow Offset Drag hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Shallow Offset Drag Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:

   Ordering Information for Drag Hat - Shallow Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.8 4.5 / 0.58      6.4 Fixed Mount Aluminum - 0.25 $134.93
Call (805) 388-1188

Drag Hat - Shallow Offset
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 0.79    Wheel Stud Circle(s): 5 Holes  on 4.5           Drag Hat - Shallow Offset
Drag Hat - Shallow Offset

Drag Hat - Shallow Offset zoom image
Drag Hat - Shallow Offset Drawing

Drag Hat - Shallow Offset Drawing zoom image

Drag Hat - Shallow Offset Description

GT Series Shallow Offset Drag hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Shallow Offset Drag Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:

   Ordering Information for Drag Hat - Shallow Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.8 4.5 / 0.58      5.9 Fixed Mount Aluminum - 0.25 $142.43
Call (805) 388-1188

Drag Hat - Shallow Offset
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 0.81    Wheel Stud Circle(s): 5 Holes  on 5.5           Drag Hat - Shallow Offset
Drag Hat - Shallow Offset

Drag Hat - Shallow Offset zoom image
Drag Hat - Shallow Offset Drawing

Drag Hat - Shallow Offset Drawing zoom image

Drag Hat - Shallow Offset Description

GT Series Shallow Offset Drag hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Shallow Offset Drag Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:

   Ordering Information for Drag Hat - Shallow Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.76 5.5 / 0.67      6.16 Fixed Mount Aluminum - 0.38 $134.93
Call (805) 388-1188

Drag Hat - Shallow Offset
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.16    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75      Drag Hat - Shallow Offset
Drag Hat - Shallow Offset

Drag Hat - Shallow Offset zoom image
Drag Hat - Shallow Offset Drawing

Drag Hat - Shallow Offset Drawing zoom image

Drag Hat - Shallow Offset Description

GT Series Shallow Offset Drag hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Shallow Offset Drag Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Drag Hat - Shallow Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.58  - 4.75 / 0.52    5.9 Fixed Mount Aluminum - 0.25 $142.43
Call (805) 388-1188

Drag Hat - Shallow Offset
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.16    Wheel Stud Circle(s): 5 Holes  on 4.5           Drag Hat - Shallow Offset
Drag Hat - Shallow Offset

Drag Hat - Shallow Offset zoom image
Drag Hat - Shallow Offset Drawing

Drag Hat - Shallow Offset Drawing zoom image

Drag Hat - Shallow Offset Description

GT Series Shallow Offset Drag hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Shallow Offset Drag Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Drag Hat - Shallow Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.5      5.9 Fixed Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Drag Hat - Shallow Offset
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.18    Wheel Stud Circle(s): 4 Holes  on 4.25           Drag Hat - Shallow Offset
Drag Hat - Shallow Offset

Drag Hat - Shallow Offset zoom image
Drag Hat - Shallow Offset Drawing

Drag Hat - Shallow Offset Drawing zoom image

Drag Hat - Shallow Offset Description

GT Series Shallow Offset Drag hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Shallow Offset Drag Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Drag Hat - Shallow Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.25 / 0.52      5.9 Fixed Mount Aluminum - 0.25 $163.76
Call (805) 388-1188

Drag Hat - Shallow Offset
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.23    Wheel Stud Circle(s): 5 Holes  on 4.5           Drag Hat - Shallow Offset
Drag Hat - Shallow Offset

Drag Hat - Shallow Offset zoom image
Drag Hat - Shallow Offset Drawing

Drag Hat - Shallow Offset Drawing zoom image

Drag Hat - Shallow Offset Description

GT Series Shallow Offset Drag hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Shallow Offset Drag Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:

   Ordering Information for Drag Hat - Shallow Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.8 4.5 / 0.58      5.9 Fixed Mount Aluminum - 0.25 $142.43
Call (805) 388-1188

Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.41    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Drag Hat - Standard
Drag Hat - Standard

Drag Hat - Standard zoom image
Drag Hat - Standard Drawing

Drag Hat - Standard Drawing zoom image

Drag Hat - Standard Description

Wilwood's HD Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. HD hats feature a straight bell construction with a flanged rotor mount ring, Threaded-hole mounts for use with through hole rotors. When used with matching Wilwood rotor hardware, these hats provide solid mounting for a wide range of custom and competition disc brake applications.These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.14 Fixed Mount Aluminum - 0.5 $94.44
Call (805) 388-1188

Dynamic Drag Hat - Lug Drive
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.41    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive

Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive Drawing

Dynamic Drag Hat - Lug Drive Drawing zoom image

Dynamic Drag Hat - Lug Drive Description

Wilwood's new Lug Drive Dynamic hats incorporate a new rotor mounting system that eliminates the rotor bolts and allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Brake response and pedal feel remain consistent. Pad knock back and rotor drag are eliminated. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. All problems associated with thermal distortion, including bolt hole alignment issues when trying to re-install new rotors on a previously used hat, are eliminated.

NOTE & CAUTIONS:
300-12561 Dynamic Lug Mount Clip & Snap Ring kit are required for rotor mounting.
   Ordering Information for Dynamic Drag Hat - Lug Drive
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.2 Dynamic Lug Mount Aluminum - 0.25 $163.76
Call (805) 388-1188

Dynamic Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.41    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Dynamic Drag Hat - Standard
Dynamic Drag Hat - Standard

Dynamic Drag Hat - Standard zoom image
Dynamic Drag Hat - Standard Drawing

Dynamic Drag Hat - Standard Drawing zoom image

Dynamic Drag Hat - Standard Description

GT Series Dynamic Mount Rotor Drag Hats are engineered to withstand the rigors and demands of extreme motorsports competition. Each hat is precision machined from premium grade aluminum offering high strength with low unsprung and rotating weight. Wilwood T-nuts float within the hat and provide true dynamic mounting of a standard through-hole mount rotors in 8 x 7.00" rotor mount patterns. . The wide load bearing load surface of the T-nut and the straight through-hole mount rotors provide the most durable and accurate method of isolating potential pad engagement harmonics and the in-service thermal variations that occur between the hat and the rotor.

NOTE & CAUTIONS:
Rotor Bolt Kit 230-7666 includes a short profile Hex Head Bolt for use with soild rotors, 230-6710 Bolt kit can be used in applications where additional clearance is available between bolt head and mount hardware.
   Ordering Information for Dynamic Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.32 Dynamic Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Dynamic Drag Hat - Lug Drive
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.59    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive

Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive Drawing

Dynamic Drag Hat - Lug Drive Drawing zoom image

Dynamic Drag Hat - Lug Drive Description

Wilwood's new Lug Drive Dynamic hats incorporate a new rotor mounting system that eliminates the rotor bolts and allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Brake response and pedal feel remain consistent. Pad knock back and rotor drag are eliminated. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. All problems associated with thermal distortion, including bolt hole alignment issues when trying to re-install new rotors on a previously used hat, are eliminated.

NOTE & CAUTIONS:
300-12561 Dynamic Lug Mount Clip & Snap Ring kit are required for rotor mounting.
   Ordering Information for Dynamic Drag Hat - Lug Drive
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.2 Dynamic Lug Mount Aluminum - 0.25 $163.76
Call (805) 388-1188

Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.59    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Drag Hat - Standard
Drag Hat - Standard

Drag Hat - Standard zoom image
Drag Hat - Standard Drawing

Drag Hat - Standard Drawing zoom image

Drag Hat - Standard Description

Wilwood's HD Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. HD hats feature a straight bell construction with a flanged rotor mount ring, Threaded-hole mounts for use with through hole rotors. When used with matching Wilwood rotor hardware, these hats provide solid mounting for a wide range of custom and competition disc brake applications.These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.14 Fixed Mount Aluminum - 0.25 $94.44
Call (805) 388-1188

Drag Hat - Shallow Offset
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.59    Wheel Stud Circle(s): 5 Holes  on 4.75           Drag Hat - Shallow Offset
Drag Hat - Shallow Offset

Drag Hat - Shallow Offset zoom image
Drag Hat - Shallow Offset Drawing

Drag Hat - Shallow Offset Drawing zoom image

Drag Hat - Shallow Offset Description

GT Series Shallow Offset Drag hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Shallow Offset Drag Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns.

NOTE & CAUTIONS:

   Ordering Information for Drag Hat - Shallow Offset
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.78 4.75 / 0.52      6.04 Fixed Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Dynamic Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.64    Wheel Stud Circle(s): 5 Holes  on 4.75    ;  4.5      Dynamic Drag Hat - Standard
Dynamic Drag Hat - Standard

Dynamic Drag Hat - Standard zoom image
Dynamic Drag Hat - Standard Drawing

Dynamic Drag Hat - Standard Drawing zoom image

Dynamic Drag Hat - Standard Description

GT Series Dynamic Mount Rotor Drag Hats are engineered to withstand the rigors and demands of extreme motorsports competition. Each hat is precision machined from premium grade aluminum offering high strength with low unsprung and rotating weight. Wilwood T-nuts float within the hat and provide true dynamic mounting of a standard through-hole mount rotors in 8 x 7.00" rotor mount patterns. . The wide load bearing load surface of the T-nut and the straight through-hole mount rotors provide the most durable and accurate method of isolating potential pad engagement harmonics and the in-service thermal variations that occur between the hat and the rotor.

NOTE & CAUTIONS:

   Ordering Information for Dynamic Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.8 4.75 / 0.52  - 4.5 / 0.52  / 0.52  6.32 Dynamic Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Dynamic Drag Hat - Lug Drive
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.64    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive

Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive Drawing

Dynamic Drag Hat - Lug Drive Drawing zoom image

Dynamic Drag Hat - Lug Drive Description

Wilwood's new Lug Drive Dynamic hats incorporate a new rotor mounting system that eliminates the rotor bolts and allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Brake response and pedal feel remain consistent. Pad knock back and rotor drag are eliminated. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. All problems associated with thermal distortion, including bolt hole alignment issues when trying to re-install new rotors on a previously used hat, are eliminated.

NOTE & CAUTIONS:
300-12561 Dynamic Lug Mount Clip & Snap Ring kit are required for rotor mounting.
   Ordering Information for Dynamic Drag Hat - Lug Drive
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.2 Dynamic Lug Mount Aluminum - 0.25 $163.76
Call (805) 388-1188

Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.68    Wheel Stud Circle(s): 5 Holes  on 4.5           Drag Hat - Standard
Drag Hat - Standard

Drag Hat - Standard
Drag Hat - Standard Drawing

Drag Hat - Standard Drawing zoom image

Drag Hat - Standard Description

Wilwood's HD Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. HD hats feature a straight bell construction with a flanged rotor mount ring, Threaded-hole mounts for use with through hole rotors. When used with matching Wilwood rotor hardware, these hats provide solid mounting for a wide range of custom and competition disc brake applications.These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.63      6.14 Fixed Mount Aluminum - 0.45 $134.93
Call (805) 388-1188

Dynamic Drag Hat - Lug Drive
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.71    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive

Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive Drawing

Dynamic Drag Hat - Lug Drive Drawing zoom image

Dynamic Drag Hat - Lug Drive Description

Wilwood's new Lug Drive Dynamic hats incorporate a new rotor mounting system that eliminates the rotor bolts and allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Brake response and pedal feel remain consistent. Pad knock back and rotor drag are eliminated. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. All problems associated with thermal distortion, including bolt hole alignment issues when trying to re-install new rotors on a previously used hat, are eliminated.

NOTE & CAUTIONS:
300-12561 Dynamic Lug Mount Clip & Snap Ring kit are required for rotor mounting.
   Ordering Information for Dynamic Drag Hat - Lug Drive
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.2 Dynamic Lug Mount Aluminum - 0.25 $163.76
Call (805) 388-1188

Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.71    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Drag Hat - Standard
Drag Hat - Standard

Drag Hat - Standard zoom image
Drag Hat - Standard Drawing

Drag Hat - Standard Drawing zoom image

Drag Hat - Standard Description

Wilwood's HD Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. HD hats feature a straight bell construction with a flanged rotor mount ring, Threaded-hole mounts for use with through hole rotors. When used with matching Wilwood rotor hardware, these hats provide solid mounting for a wide range of custom and competition disc brake applications.These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.14 Fixed Mount Aluminum - 0.25 $94.44
Call (805) 388-1188

Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.77    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Drag Hat - Standard
Drag Hat - Standard

Drag Hat - Standard zoom image
Drag Hat - Standard Drawing

Drag Hat - Standard Drawing zoom image

Drag Hat - Standard Description

Wilwood's HD Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. HD hats feature a straight bell construction with a flanged rotor mount ring, Threaded-hole mounts for use with through hole rotors. When used with matching Wilwood rotor hardware, these hats provide solid mounting for a wide range of custom and competition disc brake applications.These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.14 Fixed Mount Aluminum - 0.25 $94.44
Call (805) 388-1188

Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.96    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Drag Hat - Standard
Drag Hat - Standard

Drag Hat - Standard zoom image
Drag Hat - Standard Drawing

Drag Hat - Standard Drawing zoom image

Drag Hat - Standard Description

Wilwood's HD Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. HD hats feature a straight bell construction with a flanged rotor mount ring, Threaded-hole mounts for use with through hole rotors. When used with matching Wilwood rotor hardware, these hats provide solid mounting for a wide range of custom and competition disc brake applications.These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.14 Fixed Mount Aluminum - 0.25 $94.44
Call (805) 388-1188

Dynamic Drag Hat - Lug Drive
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.96    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive

Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive Drawing

Dynamic Drag Hat - Lug Drive Drawing zoom image

Dynamic Drag Hat - Lug Drive Description

Wilwood's new Lug Drive Dynamic hats incorporate a new rotor mounting system that eliminates the rotor bolts and allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Brake response and pedal feel remain consistent. Pad knock back and rotor drag are eliminated. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. All problems associated with thermal distortion, including bolt hole alignment issues when trying to re-install new rotors on a previously used hat, are eliminated.

NOTE & CAUTIONS:
300-12561 Dynamic Lug Mount Clip & Snap Ring kit are required for rotor mounting.
   Ordering Information for Dynamic Drag Hat - Lug Drive
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.2 Dynamic Lug Mount Aluminum - 0.25 $163.76
Call (805) 388-1188

Dynamic Drag Hat - Lug Drive
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.96    Wheel Stud Circle(s): 5 Holes  on 4.75    ;  5      Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive

Dynamic Drag Hat - Lug Drive
Dynamic Drag Hat - Lug Drive Drawing

Dynamic Drag Hat - Lug Drive Drawing zoom image

Dynamic Drag Hat - Lug Drive Description

Wilwood's new Lug Drive Dynamic hats incorporate a new rotor mounting system that eliminates the rotor bolts and allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Brake response and pedal feel remain consistent. Pad knock back and rotor drag are eliminated. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. All problems associated with thermal distortion, including bolt hole alignment issues when trying to re-install new rotors on a previously used hat, are eliminated.

NOTE & CAUTIONS:
300-12561 Dynamic Lug Mount Clip & Snap Ring kit are required for rotor mounting.
   Ordering Information for Dynamic Drag Hat - Lug Drive
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.75 / 0.7  - 5 / 0.7    6.2 Dynamic Lug Mount Aluminum - 0.25 $163.76
Call (805) 388-1188

Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.96    Wheel Stud Circle(s): 5 Holes  on 4.75           Drag Hat - Standard
Drag Hat - Standard

Drag Hat - Standard
Drag Hat - Standard Drawing

Drag Hat - Standard Drawing zoom image

Drag Hat - Standard Description

Wilwood's HD Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. HD hats feature a straight bell construction with a flanged rotor mount ring, Threaded-hole mounts for use with through hole rotors. When used with matching Wilwood rotor hardware, these hats provide solid mounting for a wide range of custom and competition disc brake applications.These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:

   Ordering Information for Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.78 4.75 / 0.5      6.14 Dynamic Lug Mount Aluminum - 0.25 $89.58
Call (805) 388-1188

Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.96    Wheel Stud Circle(s): 5 Holes  on 4.75    ;  5      Drag Hat - Standard
Drag Hat - Standard

Drag Hat - Standard zoom image
Drag Hat - Standard Drawing

Drag Hat - Standard Drawing zoom image

Drag Hat - Standard Description

Wilwood's HD Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. HD hats feature a straight bell construction with a flanged rotor mount ring, Threaded-hole mounts for use with through hole rotors. When used with matching Wilwood rotor hardware, these hats provide solid mounting for a wide range of custom and competition disc brake applications.These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:
Rotor Bolt Kit 230-0233D includes a short profile Hex Head Bolt for use with soild rotors, 230-2589 Bolt kit can be used in applications where additional clearance is available between bolt head and mount hardware.
   Ordering Information for Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.75 / 0.7  - 5 / 0.7    6.14 Fixed Mount Aluminum - 0.25 $94.44
Call (805) 388-1188

Dynamic Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.96    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Dynamic Drag Hat - Standard
Dynamic Drag Hat - Standard

Dynamic Drag Hat - Standard zoom image
Dynamic Drag Hat - Standard Drawing

Dynamic Drag Hat - Standard Drawing zoom image

Dynamic Drag Hat - Standard Description

GT Series Dynamic Mount Rotor Drag Hats are engineered to withstand the rigors and demands of extreme motorsports competition. Each hat is precision machined from premium grade aluminum offering high strength with low unsprung and rotating weight. Wilwood T-nuts float within the hat and provide true dynamic mounting of a standard through-hole mount rotors in 8 x 7.00" rotor mount patterns. . The wide load bearing load surface of the T-nut and the straight through-hole mount rotors provide the most durable and accurate method of isolating potential pad engagement harmonics and the in-service thermal variations that occur between the hat and the rotor.

NOTE & CAUTIONS:
Rotor Bolt Kit 230-7666 includes a short profile Hex Head Bolt for use with soild rotors, 230-6710 Bolt kit can be used in applications where additional clearance is available between bolt head and mount hardware.
   Ordering Information for Dynamic Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.4 Dynamic Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Drag Hat - Standard
   Rotor Bolt Circle: 8 x 7.00    Hat Offset: 1.96    Wheel Stud Circle(s): 5 Holes  on 4.75    ;  5      Drag Hat - Standard
Drag Hat - Standard

Drag Hat - Standard zoom image
Drag Hat - Standard Drawing

Drag Hat - Standard Drawing zoom image

Drag Hat - Standard Description

GT Series Dynamic Mount Rotor Drag Hats are engineered to withstand the rigors and demands of extreme motorsports competition. Each hat is precision machined from premium grade aluminum offering high strength with low unsprung and rotating weight. Wilwood T-nuts float within the hat and provide true dynamic mounting of a standard through-hole mount rotors in 8 x 7.00" rotor mount patterns. . The wide load bearing load surface of the T-nut and the straight through-hole mount rotors provide the most durable and accurate method of isolating potential pad engagement harmonics and the in-service thermal variations that occur between the hat and the rotor.

NOTE & CAUTIONS:
Rotor Bolt Kit 230-7666 includes a short profile Hex Head Bolt for use with soild rotors, 230-6710 Bolt kit can be used in applications where additional clearance is available between bolt head and mount hardware.
   Ordering Information for Drag Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.75 / 0.7  - 5 / 0.7    6.4 Dynamic Mount Aluminum - 0.25 $170.58
Call (805) 388-1188

Pro-Street Hat - Standard
   Rotor Bolt Circle: 8 x 7.62    Hat Offset: 1.25    Wheel Stud Circle(s): 5 Holes  on 4.5           Pro-Street Hat - Standard
Pro-Street Hat - Standard

Pro-Street Hat - Standard zoom image
Pro-Street Hat - Standard Drawing

Pro-Street Hat - Standard Drawing zoom image

Pro-Street Hat - Standard Description

Wilwood's Pro Street Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. Pro Street hats feature a straight bell construction with a flanged rotor mount ring, with through holes for use with threaded-hole, 8 x 7.62 mount rotors. These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Pro-Street Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52      6.32 Fixed Mount Aluminum - 0.25 $125.22
Call (805) 388-1188

Pro-Street Hat - Standard
   Rotor Bolt Circle: 8 x 7.62    Hat Offset: 1.38    Wheel Stud Circle(s): 5 Holes  on 4.5           Pro-Street Hat - Standard
Pro-Street Hat - Standard

Pro-Street Hat - Standard zoom image
Pro-Street Hat - Standard Drawing

Pro-Street Hat - Standard Drawing zoom image

Pro-Street Hat - Standard Description

Wilwood's Pro Street Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. Pro Street hats feature a straight bell construction with a flanged rotor mount ring, with through holes for use with threaded-hole, 8 x 7.62 mount rotors. These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:

   Ordering Information for Pro-Street Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.23 4.5 / 0.67      6.27 Fixed Mount Aluminum - 0.25 $134.93
Call (805) 388-1188

Pro-Street Hat - Standard
   Rotor Bolt Circle: 8 x 7.62    Hat Offset: 1.5    Wheel Stud Circle(s): 5 Holes  on 4.75           Pro-Street Hat - Standard
Pro-Street Hat - Standard

Pro-Street Hat - Standard zoom image
Pro-Street Hat - Standard Drawing

Pro-Street Hat - Standard Drawing zoom image

Pro-Street Hat - Standard Description

Wilwood's Pro Street Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. Pro Street hats feature a straight bell construction with a flanged rotor mount ring, with through holes for use with threaded-hole, 8 x 7.62 mount rotors. These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:

   Ordering Information for Pro-Street Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.85 4.75 / 0.51      6.51 Fixed Mount Aluminum - 0.5 $134.93
Call (805) 388-1188

Pro-Street Hat - Standard
   Rotor Bolt Circle: 8 x 7.62    Hat Offset: 2    Wheel Stud Circle(s): 5 Holes  on 4.5    ;  4.75    ;  5 Pro-Street Hat - Standard
Pro-Street Hat - Standard

Pro-Street Hat - Standard zoom image
Pro-Street Hat - Standard Drawing

Pro-Street Hat - Standard Drawing zoom image

Pro-Street Hat - Standard Description

Wilwood's Pro Street Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. Pro Street hats feature a straight bell construction with a flanged rotor mount ring, with through holes for use with threaded-hole, 8 x 7.62 mount rotors. These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:
3.06 " diameter register with counterbore for register ring.
   Ordering Information for Pro-Street Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
3.06 4.5 / 0.52  - 4.75 / 0.52  - 5 / 0.52  6.5 Fixed Mount Aluminum - 0.25 $94.44
Call (805) 388-1188

Pro-Street Hat - Standard
   Rotor Bolt Circle: 8 x 7.62    Hat Offset: 2.1    Wheel Stud Circle(s): 5 Holes  on 4.5           Pro-Street Hat - Standard
Pro-Street Hat - Standard

Pro-Street Hat - Standard zoom image
Pro-Street Hat - Standard Drawing

Pro-Street Hat - Standard Drawing zoom image

Pro-Street Hat - Standard Description

Wilwood's Pro Street Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. HD hats have not only been a mainstay in many of Wilwood's racing disc brake conversion kits, but they can cover a range of applications from an OE four lug axle shaft to a Grand-National stock car racing hub. Pro Street hats feature a straight bell construction with a flanged rotor mount ring, with through holes for use with threaded-hole, 8 x 7.62 mount rotors. These features combine to provide maximum radial clearance between the caliper body and the hat. This can be a critical factor when trying to squeeze a large caliper inside a small wheel. Many hats offer multi-lug wheel patterns for added versatility. Some hats can be ordered blank for custom axle building and other unique applications.

NOTE & CAUTIONS:

   Ordering Information for Pro-Street Hat - Standard
  Info Center Reg Dia.: Whl Stud Cir Dia/Stud Dia: I.D. Clear(in): Mount Type: Material: Shoe I.D.: Face Thick: Price: Part Number: Purchase Info:
2.75 4.5 / 0.5      6.31 Fixed Mount Aluminum - 0.25 $134.93
Call (805) 388-1188