Wednesday, January 17, 2018
Dynapro Radial Front Drag Brake Kit

Front Brake Kits
Wilwood Disc Brakes offers the largest selection of bolt-on brake kits with specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. Most kits are easily installed with the common hand tools used to perform routine brake service.

Your Search Result for:
Dynapro Radial Front Drag Brake Kit (8) Brake Kits Available

   Sort Results List By:

Dynapro Radial Front Drag Brake Kit
   Pistons: 4    Rotor Diameter: 12.9    Caliper Mount: Radial    Min. Wheel Diameter: 17 Dynapro Radial Front Drag Brake Kit
Dynapro Radial Front Drag Brake Kit

Dynapro Radial Front Drag Brake Kit
zoom image
Dynapro Radial Front Drag Brake Kit Parts

Dynapro Radial Front Drag Brake Kit Parts
zoom image

Dynapro Radial Front Drag Brake Kit Description

DynaPro4R Drag Race front brake kits deliver high torque stopping power with a substantial weight savings over the OE brake components. Dynamic mount steel rotors weigh only 5.7 pounds each. They attach to the OE hubs with lightweight forged aluminum hats using our T-nut mounting system that allows the rotor to move independently of the hat during heat cycles. This eliminates stress at the mount points and the subsequent rotor distortion that can otherwise occur with fixed mount steel plate rotors. Dynamic mount rotors also assure full release from the pads to run true and drag free down the track. Clamping force is provided by radial mount DynaPro 4R four piston aluminum calipers weighing in at only 4.1 pounds each. DP4R calipers feature stainless steel pistons, internal bore seals, stainless steel bridge wear plates, and allow easy access to the pads for service without removing the calipers from the mount. BP-20 compound SmartPads provide high response and holding power when cold, and resistance to fade when hot. The complete package mounts to the OE spindle with full bolt-on installation. This kit is configured for drag racing only and is not recommended for street use. A minimum size 17” wheels are required along with a stainless steel braided flexline kit available separately.



This kit fits the following vehicles:
Ford Mustang 2015 Ford Mustang 2015-2018 Ford Mustang 2016-2017 Ford Mustang 2016-2018

   Ordering Information for Dynapro Radial Front Drag Brake Kit
InfoCaliper ColorRotorLine KitPricePart No / More InfoPurchase
Black Anodize
Drilled 220-13912 * $1,455.94
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
   Pistons: 4    Rotor Diameter: 12.88    Caliper Mount: Radial    Min. Wheel Diameter: 17 Dynapro Radial Front Drag Brake Kit
Dynapro Radial Front Drag Brake Kit

Dynapro Radial Front Drag Brake Kit
zoom image
Dynapro Radial Front Drag Brake Kit Parts

Dynapro Radial Front Drag Brake Kit Parts
zoom image

Dynapro Radial Front Drag Brake Kit Description

This DynaPro4R Drag Race front brake kit is configured with GT48 directional vane Spec 37 alloy vented iron rotors for optimized thermal stability and durability on drag cars that will also see street use. DP4R race kits deliver high torque stopping power with a substantial weight savings over the OE brake components. These 12.88” x .81” rotors weigh only 10.2 pounds each. Lightweight forged aluminum hats provide additional weight savings to mount the rotors to the OE hubs. Clamping force is provided by radial mount DynaPro 4R four piston aluminum calipers weighing in at only 4.1 pounds each. DP4R calipers feature stainless steel pistons, internal bore seals, stainless steel bridge wear plates, and e-clip style pad retaining pins to allow quick and easy access to the pads without removing the calipers from the mount. BP-20 compound SmartPads provide high response and holding power when cold, and resistance to fade when hot. The complete package mounts to the OE spindle and hub with full bolt-on installation. A minimum size 17” wheels are required along with a stainless steel braided flexline kit available separately.



This kit fits the following vehicles:
Ford Mustang 2015 Ford Mustang 2015-2018 Ford Mustang 2016-2017 Ford Mustang 2016-2018

   Ordering Information for Dynapro Radial Front Drag Brake Kit
InfoCaliper ColorRotorLine KitPricePart No / More InfoPurchase
Black Anodize
Drilled 220-13912 * $1,343.94
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
   Pistons: 4    Rotor Diameter: 11.75    Caliper Mount: Radial    Min. Wheel Diameter: 15 Dynapro Radial Front Drag Brake Kit
Dynapro Radial Front Drag Brake Kit

Dynapro Radial Front Drag Brake Kit
zoom image
Dynapro Radial Front Drag Brake Kit Parts

Dynapro Radial Front Drag Brake Kit Parts
zoom image

Dynapro Radial Front Drag Brake Kit Description

NDPR forged billet, radial mount four piston calipers are used in this select group of drag racing kits. The OE brakes on vehicles originally equipped with 16” or larger wheels generally do not fit inside the popular 15” drag wheels. Specially designed radial caliper mount brackets bolt directly to the OE caliper mount, and provide secure and accurate mounting for the NDPR caliper. Kits with 3/8” steel rotors are recommended for four-wheel disc brake cars up to 2,800 pounds. Kits with .81” rotors should be used on cars over 2,800 pound cars, or lighter cars running extreme speeds desiring increased rotor durability.



This kit fits the following vehicles:
Ford Mustang 1994-2004 Ford Mustang 1999-2000 Ford Mustang 2001 Ford Mustang 2003-2004

   Ordering Information for Dynapro Radial Front Drag Brake Kit
InfoCaliper ColorRotorLine KitPricePart No / More InfoPurchase
Black Anodize
Drilled 220-6458 * $960.90
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
   Pistons: 4    Rotor Diameter: 11.75    Caliper Mount: Radial    Min. Wheel Diameter: 15 Dynapro Radial Front Drag Brake Kit
Dynapro Radial Front Drag Brake Kit

Dynapro Radial Front Drag Brake Kit
zoom image
Dynapro Radial Front Drag Brake Kit Parts

Dynapro Radial Front Drag Brake Kit Parts
zoom image

Dynapro Radial Front Drag Brake Kit Description

NDPR forged billet, radial mount four piston calipers are used in this select group of drag racing kits. The OE brakes on vehicles originally equipped with 16” or larger wheels generally do not fit inside the popular 15” drag wheels. Specially designed radial caliper mount brackets bolt directly to the OE caliper mount, and provide secure and accurate mounting for the NDPR caliper. Kits with 3/8” steel rotors are recommended for four-wheel disc brake cars up to 2,800 pounds. Kits with .81” rotors should be used on cars over 2,800 pound cars, or lighter cars running extreme speeds desiring increased rotor durability.



This kit fits the following vehicles:
Ford Mustang 1994-2004 Ford Mustang 1999-2000 Ford Mustang 2001 Ford Mustang 2003-2004

   Ordering Information for Dynapro Radial Front Drag Brake Kit
InfoCaliper ColorRotorLine KitPricePart No / More InfoPurchase
Black Anodize
Undrilled 220-6458 * $936.26
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
   Pistons: 4    Rotor Diameter: 11.75    Caliper Mount: Radial    Min. Wheel Diameter: 15 Dynapro Radial Front Drag Brake Kit
Dynapro Radial Front Drag Brake Kit

Dynapro Radial Front Drag Brake Kit
zoom image
Dynapro Radial Front Drag Brake Kit Parts

Dynapro Radial Front Drag Brake Kit Parts
zoom image

Dynapro Radial Front Drag Brake Kit Description

NDPR forged billet, radial mount four piston calipers are used in this select group of drag racing kits. The OE brakes on vehicles originally equipped with 16” or larger wheels generally do not fit inside the popular 15” drag wheels. Specially designed radial caliper mount brackets bolt directly to the OE caliper mount, and provide secure and accurate mounting for the NDPR caliper. Kits with 3/8” steel rotors are recommended for four-wheel disc brake cars up to 2,800 pounds. Kits with .81” rotors should be used on cars over 2,800 pound cars, or lighter cars running extreme speeds desiring increased rotor durability.



This kit fits the following vehicles:
Ford Mustang 2005-2013 Ford Mustang 2007-2014 Ford Mustang 2011-2012 Ford Mustang 2014
Ford Mustang 2007-2009 Ford Mustang 2008 Ford Mustang 2012-2013

   Ordering Information for Dynapro Radial Front Drag Brake Kit
InfoCaliper ColorRotorLine KitPricePart No / More InfoPurchase
Black Anodize
Undrilled 220-9111 * $936.26
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
   Pistons: 4    Rotor Diameter: 11.75    Caliper Mount: Radial    Min. Wheel Diameter: 15 Dynapro Radial Front Drag Brake Kit
Dynapro Radial Front Drag Brake Kit

Dynapro Radial Front Drag Brake Kit
zoom image
Dynapro Radial Front Drag Brake Kit Parts

Dynapro Radial Front Drag Brake Kit Parts
zoom image

Dynapro Radial Front Drag Brake Kit Description

NDPR forged billet, radial mount four piston calipers are used in this select group of drag racing kits. The OE brakes on vehicles originally equipped with 16” or larger wheels generally do not fit inside the popular 15” drag wheels. Specially designed radial caliper mount brackets bolt directly to the OE caliper mount, and provide secure and accurate mounting for the NDPR caliper. Kits with 3/8” steel rotors are recommended for four-wheel disc brake cars up to 2,800 pounds. Kits with .81” rotors should be used on cars over 2,800 pound cars, or lighter cars running extreme speeds desiring increased rotor durability.



This kit fits the following vehicles:
Chevrolet Camaro 1993-1997 Chevrolet Camaro 1998-2002 Pontiac Firebird 1998-2002

   Ordering Information for Dynapro Radial Front Drag Brake Kit
InfoCaliper ColorRotorLine KitPricePart No / More InfoPurchase
Black Anodize
Drilled 220-6746 * $960.90
Call (805) 388-1188

Dynapro Radial Front Drag Brake Kit
   Pistons: 4    Rotor Diameter: 11.75    Caliper Mount: Radial    Min. Wheel Diameter: 15 Dynapro Radial Front Drag Brake Kit
Dynapro Radial Front Drag Brake Kit

Dynapro Radial Front Drag Brake Kit
zoom image
Dynapro Radial Front Drag Brake Kit Parts

Dynapro Radial Front Drag Brake Kit Parts
zoom image

Dynapro Radial Front Drag Brake Kit Description

NDPR forged billet, radial mount four piston calipers are used in this select group of drag racing kits. The OE brakes on vehicles originally equipped with 16” or larger wheels generally do not fit inside the popular 15” drag wheels. Specially designed radial caliper mount brackets bolt directly to the OE caliper mount, and provide secure and accurate mounting for the NDPR caliper. Kits with 3/8” steel rotors are recommended for four-wheel disc brake cars up to 2,800 pounds. Kits with .81” rotors should be used on cars over 2,800 pound cars, or lighter cars running extreme speeds desiring increased rotor durability.



This kit fits the following vehicles:
Chevrolet Camaro 1993-1997 Chevrolet Camaro 1998-2002 Pontiac Firebird 1998-2002

   Ordering Information for Dynapro Radial Front Drag Brake Kit
InfoCaliper ColorRotorLine KitPricePart No / More InfoPurchase
Black Anodize
Undrilled 220-6746 * $936.26
Call (805) 388-1188
Black Anodize
Drilled & Slotted 220-6746 * $1,048.26
Call (805) 388-1188