Thursday, January 18, 2018
Dynapro Dust-Boot Pro Series Front Brake Kit

Front Brake Kits
Wilwood Disc Brakes offers the largest selection of bolt-on brake kits with specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. Most kits are easily installed with the common hand tools used to perform routine brake service.

Your Search Result for:
Dynapro Dust-Boot Pro Series Front Brake Kit (19) Brake Kits Available

   Sort Results List By:

Dynapro Dust-Boot Pro Series Front Brake Kit
   Pistons: 4    Rotor Diameter: 11    Caliper Mount: Lug    Min. Wheel Diameter: 14 Dynapro Dust-Boot Pro Series Front Brake Kit
Dynapro Dust-Boot Pro Series Front Brake Kit

Dynapro Dust-Boot Pro Series Front Brake Kit
zoom image
Dynapro Dust-Boot Pro Series Front Brake Kit Parts

Dynapro Dust-Boot Pro Series Front Brake Kit Parts
zoom image

Dynapro Dust-Boot Pro Series Front Brake Kit Description

Wilwood's new limited offset DP-DB Pro-Series Front Hub Kits for GM 1967-1969 F-Body and 1964-1974 A-Body vehicles offer disc brake upgrade solutions for both OEM Disc & Drum spindles. We have completely redesigned our Pro Series line of brake kits using a larger 11" rotor and new forged aluminum hubs with the express purpose of maintaining the factory wheel position. This new kit widens the track with by only +.19" from original drum brake position, and -.31" from the original disc brake assemblies. Based on the venerable forged billet Dynapro Dust Boot caliper, these kits were developed for applications or locations that require or prefer a dust-booted piston. Dust-booted aluminum pistons provide added protection against road or track born dirt and debris on low to intermediate temperature range applications that may also operate in harsh environments. Most vehicle applications require no modifications for installation, and provide plenty of clearance inside popular 15" wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders. Kits come complete with calipers, rotors, hub assembly, brackets and hardware. Kit installation requires purchase of additional brake lines shown below.



This kit fits the following vehicles:
Buick Apollo 1973-1974 Chevrolet Chevelle 1967-1972 Oldsmobile Cutlass Supreme 1970-1972 Pontiac Grand Prix 1969-1972
Buick Gran Sport 1965-1966 Chevrolet Chevy II 1964-1966 Oldsmobile F85 1964-1966 Pontiac GTO 1964-1966
Buick Gran Sport 1967-1970 Chevrolet Chevy II 1967-1968 Oldsmobile F85 1967-1969 Pontiac GTO 1967-1971
Buick Gran Sport 1967-1972 Chevrolet El Camino 1964-1966 Oldsmobile F85 1967-1972 Pontiac GTO 1967-1972
Buick Skylark 1964-1966 Chevrolet El Camino 1967-1972 Oldsmobile F85 1970-1972 Pontiac LeMans 1964-1966
Buick Skylark 1967-1970 Chevrolet Monte Carlo 1970-1972 Oldsmobile Omega 1973-1974 Pontiac LeMans 1967-1972
Buick Skylark 1967-1972 Chevrolet Nova 1969-1974 Oldsmobile Vista Cruiser 1964-1966 Pontiac Tempest 1964-1966
Buick Special 1964-1966 GMC Sprint 1971-1972 Oldsmobile Vista Cruiser 1967-1972 Pontiac Tempest 1967-1972
Buick Special 1967-1969 Oldsmobile 442 1964-1966 Pontiac Acadian 1964-1966 Pontiac Ventura II 1971-1974
Buick Sportwagon 1964-1966 Oldsmobile 442 1967-1972 Pontiac Acadian 1967-1971 Ridetech 1963-1979 C2/C3 Corvette
Buick Sportwagon 1967-1970 Oldsmobile 442 1970-1972 Pontiac Beaumont 1964-1966 Ridetech 1964-1966 Mustang
Buick Sportwagon 1967-1972 Oldsmobile Cutlass 1964-1966 Pontiac Beaumont 1967-1969 Ridetech 1964-1972 GM A Body
Chevrolet Camaro 1967-1969 Oldsmobile Cutlass 1967-1972 Pontiac Firebird 1967-1969 Ridetech 1967-1969 GM F Body
Chevrolet Camaro 1968-1969 Oldsmobile Cutlass 1970-1972 Pontiac Grand Prix 1969 Ridetech 1968-1974 GM X Body
Chevrolet Chevelle 1964-1966 Oldsmobile Cutlass Supreme 1967-1972

   Ordering Information for Dynapro Dust-Boot Pro Series Front Brake Kit
InfoCaliper ColorRotorLine KitPricePart No / More InfoPurchase
Black Anodize
Undrilled 220-7056 * $887.59
Call (805) 388-1188
Black Anodize
Drilled & Slotted 220-7056 * $999.59
Call (805) 388-1188
Red Powder Coat
Drilled & Slotted 220-7056 * $999.59
Call (805) 388-1188
Red Powder Coat
Undrilled 220-7056 * $887.59
Call (805) 388-1188

Dynapro Dust-Boot Pro Series Front Brake Kit
   Pistons: 4    Rotor Diameter: 11    Caliper Mount: Lug    Min. Wheel Diameter: 14 Dynapro Dust-Boot Pro Series Front Brake Kit
Dynapro Dust-Boot Pro Series Front Brake Kit

Dynapro Dust-Boot Pro Series Front Brake Kit
zoom image
Dynapro Dust-Boot Pro Series Front Brake Kit Parts

Dynapro Dust-Boot Pro Series Front Brake Kit Parts
zoom image

Dynapro Dust-Boot Pro Series Front Brake Kit Description

Wilwood's new limited offset DP-DB Pro-Series Front Hub Kits offer disc brake upgrade solutions for OEM spindles. We have completely redesigned our Pro Series line of brake kits using a larger 11" rotor and new forged aluminum hubs with the express purpose of maintaining the factory wheel position. Based on the venerable forged billet Dynapro Dust Boot caliper, these kits were developed for applications or locations that require or prefer a dust-booted piston. Dust-booted aluminum pistons provide added protection against road or track born dirt and debris on low to intermediate temperature range applications that may also operate in harsh environments. Most vehicle applications require no modifications for installation, and provide plenty of clearance inside popular 15" wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders. Kits come complete with calipers, rotors, hub assembly, brackets and hardware. Kit installation requires purchase of additional brake lines shown below.



This kit fits the following vehicles:
Ford Fairlane 1966-1969 Ford Mustang 1967-1969 Ford Torino 1968-1969 Mercury Cyclone 1965-1968
Ford Falcon 1963-1964 Ford Mustang 1970 Ford Torino 1969 Mercury Cyclone 1966-1969
Ford Falcon 1965-1966 Ford Ranchero 1963-1964 Mercury Comet 1963-1964 Mercury Cyclone 1969
Ford Falcon 1967-1969 Ford Ranchero 1965 Mercury Comet 1965-1966 Mercury Montego 1968
Ford Falcon 1970 Ford Ranchero 1966-1969 Mercury Comet 1967-1969 Mercury Montego 1968-1969
Ford Maverick 1970 Ford Ranchero 1967-1968 Mercury Cougar 1967-1969 Mercury Montego 1969
Ford Mustang 1965-1966 Ford Torino 1968 Mercury Cyclone 1963-1964

   Ordering Information for Dynapro Dust-Boot Pro Series Front Brake Kit
InfoCaliper ColorRotorLine KitPricePart No / More InfoPurchase
Black Anodize
Undrilled 220-12168 * $901.59
Call (805) 388-1188
Black Anodize
Drilled & Slotted 220-12168 * $1,013.59
Call (805) 388-1188
Red Powder Coat
Drilled & Slotted 220-12168 * $1,013.59
Call (805) 388-1188
Red Powder Coat
Undrilled 220-12168 * $901.59
Call (805) 388-1188

Dynapro Dust-Boot Pro Series Front Brake Kit
   Pistons: 4    Rotor Diameter: 11    Caliper Mount: Lug    Min. Wheel Diameter: 14 Dynapro Dust-Boot Pro Series Front Brake Kit
Dynapro Dust-Boot Pro Series Front Brake Kit

Dynapro Dust-Boot Pro Series Front Brake Kit
zoom image
Dynapro Dust-Boot Pro Series Front Brake Kit Parts

Dynapro Dust-Boot Pro Series Front Brake Kit Parts
zoom image

Dynapro Dust-Boot Pro Series Front Brake Kit Description

Wilwood's new limited offset DP-DB Pro-Series Front Hub Kits offer disc brake upgrade solutions for OEM spindles. We have completely redesigned our Pro Series line of brake kits using a larger 11" rotor and new forged aluminum hubs with the express purpose of maintaining the factory wheel position. Based on the venerable forged billet Dynapro Dust Boot caliper, these kits were developed for applications or locations that require or prefer a dust-booted piston. Dust-booted aluminum pistons provide added protection against road or track born dirt and debris on low to intermediate temperature range applications that may also operate in harsh environments. Most vehicle applications require no modifications for installation, and provide plenty of clearance inside popular 15" wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders. Kits come complete with calipers, rotors, hub assembly, brackets and hardware. Kit installation requires purchase of additional brake lines shown below.



This kit fits the following vehicles:
Wilwood ProSpindle

   Ordering Information for Dynapro Dust-Boot Pro Series Front Brake Kit
InfoCaliper ColorRotorLine KitPricePart No / More InfoPurchase
Black Anodize
Undrilled 220-8307 * $887.59
Call (805) 388-1188
Black Anodize
Drilled & Slotted 220-8307 * $999.59
Call (805) 388-1188
Polish
Drilled & Slotted 220-8307 * $1,111.59
Call (805) 388-1188
Red Powder Coat
Drilled & Slotted 220-8307 * $999.59
Call (805) 388-1188
Red Powder Coat
Undrilled 220-8307 * $887.59
Call (805) 388-1188

Dynapro Dust-Boot Pro Series Front Brake Kit
   Pistons: 4    Rotor Diameter: 11    Caliper Mount: Lug    Min. Wheel Diameter: 14 Dynapro Dust-Boot Pro Series Front Brake Kit
Dynapro Dust-Boot Pro Series Front Brake Kit

Dynapro Dust-Boot Pro Series Front Brake Kit
zoom image
Dynapro Dust-Boot Pro Series Front Brake Kit Parts

Dynapro Dust-Boot Pro Series Front Brake Kit Parts
zoom image

Dynapro Dust-Boot Pro Series Front Brake Kit Description

Wilwood's new limited offset DP-DB Pro-Series Front Hub Kits offer disc brake upgrade solutions for OEM spindles. We have completely redesigned our Pro Series line of brake kits using a larger 11" rotor and new forged aluminum hubs with the express purpose of maintaining the factory wheel position. Based on the venerable forged billet Dynapro Dust Boot caliper, these kits were developed for applications or locations that require or prefer a dust-booted piston. Dust-booted aluminum pistons provide added protection against road or track born dirt and debris on low to intermediate temperature range applications that may also operate in harsh environments. Most vehicle applications require no modifications for installation, and provide plenty of clearance inside popular 15" wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders. Kits come complete with calipers, rotors, hub assembly, brackets and hardware. Kit installation requires purchase of additional brake lines shown below.
Note 1. Kit includes 5 lug hubs. Not applicable to 4 lug vehicles.


This kit fits the following vehicles:
Ford Mustang II 1974-1978 Magnum Force 1.50 " Drop Spindle Magnum Force 3.50 " Drop Spindle Mercury Bobcat 1975-1980
Ford Pinto 1974-1980

   Ordering Information for Dynapro Dust-Boot Pro Series Front Brake Kit
InfoCaliper ColorRotorLine KitPricePart No / More InfoPurchase
Black Anodize
Undrilled 220-8307 * $887.59
Call (805) 388-1188
Black Anodize
Drilled & Slotted 220-8307 * $999.59
Call (805) 388-1188
Polish
Drilled & Slotted 220-8307 * $1,111.59
Call (805) 388-1188
Red Powder Coat
Drilled & Slotted 220-8307 * $999.59
Call (805) 388-1188
Polish
Undrilled 220-8307 * $999.59
Call (805) 388-1188
Red Powder Coat
Undrilled 220-8307 * $887.59
Call (805) 388-1188